[Mon May 20 02:25:57 2013] Detection parameters:
  Position = (318.7, 306.0) = 15 59 9.93 63 52 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.6 +/- 10.1
  Background counts = 7.6
  Rate = 0.003 +/- 0.0005

[Mon May 20 02:25:58 2013] Off-axis axis estimate = 1.57'
[Mon May 20 04:47:14 2013] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Mon May 20 04:47:14 2013] Initial guess for spatial extent in simple fitting = 7.21"
[Mon May 20 04:47:14 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.074
[Mon May 20 04:47:14 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 7.21"
[Mon May 20 05:47:32 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_src15.ximg exists
[Mon May 20 05:47:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_src15.csv
[Mon May 20 05:47:32 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon May 20 05:47:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_src15.csv
[Mon May 20 05:47:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 05:47:32 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon May 20 05:47:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon May 20 05:47:32 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May 20 05:47:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon May 20 05:47:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 05:47:59 2013] Spatial fit model total counts = 175.616000, observed total counts = 152.000000
[Mon May 20 05:47:59 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 05:47:59 2013] Vigneting correction estimate = 1.000000
[Mon May 20 05:47:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 05:47:59 2013] Assessing source extent using major
[Mon May 20 05:47:59 2013] Source does appear to be extended
[Mon May 20 05:47:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 07:42:25 2013] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Mon May 20 07:42:25 2013] Initial guess for spatial extent in simple fitting = 7.21"
[Mon May 20 07:42:25 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.074
[Mon May 20 07:42:25 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 7.21"
[Mon May 20 08:34:52 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_src15.ximg exists
[Mon May 20 08:34:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_src15.csv
[Mon May 20 08:34:52 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon May 20 08:34:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_src15.csv
[Mon May 20 08:34:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 08:34:52 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon May 20 08:34:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon May 20 08:34:52 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 20 08:34:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon May 20 08:34:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 08:35:19 2013] Source 16 is offset by -5.408458 and -6.497129 pixels which is larger than
2 X fitted extent = 1.415727 x 1.415727, not incorporating fit results
[Mon May 20 08:35:19 2013] Spatial fit model total counts = 169.298000, observed total counts = 152.000000
[Mon May 20 08:35:19 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 08:35:19 2013] Vigneting correction estimate = 1.000000
[Mon May 20 08:35:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 08:35:19 2013] Assessing source extent using major
[Mon May 20 08:35:19 2013] Source does appear to be extended
[Mon May 20 08:35:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 09:47:34 2013] XMMSAS src. selection expression = ellipse(27674.190186, 26575.225769, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 09:47:34 2013] Writing source region out to fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src16_src.reg
[Mon May 20 09:47:34 2013] Extracting stamp from image fullrun_mos2_xmm0070341201_pi300-10000_cl_sm2.00.img.gz, (281, 269) - (356, 344)
[Mon May 20 09:47:34 2013] XMMSAS bgd. selection expression = annulus(27674.190186, 26575.225769, 1087.500000, 2175.000000, X, Y) && !ellipse(27360.580600, 27955.124800, 825.024024, 825.024024, 0.000000, X, Y)
[Mon May 20 09:47:34 2013] Writing fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src16.gif
[Mon May 20 09:52:44 2013] Mean detx,y = (-92.62, -335.28) 
[Mon May 20 09:52:45 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 09:52:55 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 09:52:55 2013] Setting source spectrum file to fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon May 20 09:52:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon May 20 10:03:21 2013] Not generating rmf since there are only 58 counts
[Mon May 20 10:03:21 2013] rmf not generated due to insufficient counts
[Mon May 20 10:05:21 2013] Updating aperture counts using extracted products
[Mon May 20 10:05:21 2013] Total counts from fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 110.00
[Mon May 20 10:05:21 2013] Total counts from fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src16_bgd.pi.gz = 373.00
[Mon May 20 10:05:21 2013] Got source and background scale factors 1180340.000000, 9079800.000000
[Mon May 20 10:05:21 2013] User source parameters:
  Position = (318.7, 306.0) = 15 59 9.93 63 52 43.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 61.5 +/- 11.5
  Background aperture counts = 48.5
  Rate = 0.003 +/- 0.0005

[Mon May 20 10:05:21 2013] Updating counts from extracted products
[Mon May 20 10:05:21 2013] Set source signif. to 61.51/6.96 = 8.83
[Mon May 20 10:05:24 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 10:05:24 2013] Using photon index=1.80, rate=0.00279, arf fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src16.arf
[Mon May 20 10:05:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 10:05:24 2013] Updating source flux to 3.2e-14
[Mon May 20 10:05:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 10:05:27 2013] xmm0070341201/analysis//spectral/fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete