[Mon May 20 02:25:56 2013] Detection parameters:
  Position = (396.7, 350.5) = 15 58 18.40 63 55 55.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.3 +/- 8.4
  Background counts = 6.5
  Rate = 0.003 +/- 0.0006

[Mon May 20 02:25:58 2013] Off-axis axis estimate = 8.06'
[Mon May 20 04:47:14 2013] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Mon May 20 04:47:14 2013] Initial guess for spatial extent in simple fitting = 10.46"
[Mon May 20 04:47:14 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.889
[Mon May 20 04:47:14 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 10.46"
[Mon May 20 05:47:32 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_src16.ximg exists
[Mon May 20 05:47:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_src16.csv
[Mon May 20 05:47:32 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon May 20 05:47:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_src16.csv
[Mon May 20 05:47:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 05:47:32 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon May 20 05:47:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src16.csv
[Mon May 20 05:47:32 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon May 20 05:47:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src16.csv
[Mon May 20 05:47:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 05:47:59 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.771099 pixels away
[Mon May 20 05:47:59 2013] Vigneting correction estimate = 1.000000
[Mon May 20 05:47:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 05:47:59 2013] Assessing source extent using major
[Mon May 20 05:47:59 2013] Source does appear to be extended
[Mon May 20 05:47:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 07:42:25 2013] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Mon May 20 07:42:25 2013] Initial guess for spatial extent in simple fitting = 10.46"
[Mon May 20 07:42:25 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.889
[Mon May 20 07:42:25 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 10.46"
[Mon May 20 08:34:52 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_src16.ximg exists
[Mon May 20 08:34:52 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon May 20 08:34:52 2013] Fit fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_src16 appears to have run properly
[Mon May 20 08:34:52 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon May 20 08:34:52 2013] fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon May 20 08:34:52 2013] Fit fullrun_mos2_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Mon May 20 08:35:19 2013] Source 11 is offset by -8.064231 and -2.707100 pixels which is larger than
2 X fitted extent = 1.220920 x 1.220920, not incorporating fit results
[Mon May 20 08:35:19 2013] Spatial fit model total counts = 86.653100, observed total counts = 91.000000
[Mon May 20 08:35:19 2013] Offset between fit and detection position for source 11 = 1.900807 pixels
[Mon May 20 08:35:19 2013] 82.390700 total counts/ 36.076800 bgd. counts: snr = 7.710763
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.900807 pixels
  Position = (395.0, 351.3) = 15 58 19.53 63 56 0.1
  Extent = 15.9 (12.2-20.9)" x 4.4 (2.9-6.1)", rotation angle = 39 (31-48) degrees
  Source counts = 46.3 +/- 9.1
  Background counts = 36.1
  Rate = 0.002 +/- 0.0004
[Mon May 20 08:35:19 2013] Vigneting correction estimate = 1.000000
[Mon May 20 08:35:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 08:35:19 2013] Assessing source extent using major axis lower bound
[Mon May 20 08:35:19 2013] Source does appear to be extended
[Mon May 20 08:35:19 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.00
[Mon May 20 08:35:19 2013] Source is asymmetric
[Mon May 20 09:47:34 2013] XMMSAS src. selection expression = ellipse(34315.429200, 30518.453800, 953.418027, 264.082808, 39.197500, X, Y)
[Mon May 20 09:47:34 2013] Writing source region out to fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src11_src.reg
[Mon May 20 09:47:34 2013] Extracting stamp from image fullrun_mos2_xmm0070341201_pi300-10000_cl_sm2.00.img.gz, (340, 297) - (450, 406)
[Mon May 20 09:47:34 2013] XMMSAS bgd. selection expression = annulus(34315.429200, 30518.453800, 1589.030046, 3178.060091, X, Y) && !ellipse(34305.332947, 31474.224762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38034.087952, 31615.591797, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 09:47:34 2013] Writing fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src11.gif
[Mon May 20 09:52:59 2013] Mean detx,y = (-4578.14, 5994.43) 
[Mon May 20 09:53:00 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 09:53:37 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 09:53:38 2013] Setting source spectrum file to fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 20 09:53:38 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon May 20 10:03:27 2013] Not generating rmf since there are only 46 counts
[Mon May 20 10:03:27 2013] rmf not generated due to insufficient counts
[Mon May 20 10:05:21 2013] Updating aperture counts using extracted products
[Mon May 20 10:05:21 2013] Total counts from fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 44.00
[Mon May 20 10:05:22 2013] Total counts from fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 683.00
[Mon May 20 10:05:22 2013] Got source and background scale factors 668452.000000, 21730683.000000
[Mon May 20 10:05:22 2013] User source parameters:
  Position = (395.0, 351.3) = 15 58 19.53 63 56 0.1
  Extent = 15.9 (12.2-20.9)" x 4.4 (2.9-6.1)", rotation angle = 39 (31-48) degrees
  Source aperture counts = 23.0 +/- 7.7
  Background aperture counts = 21.0
  Rate = 0.001 +/- 0.0003

[Mon May 20 10:05:24 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 10:05:24 2013] Using photon index=1.80, rate=0.0021, arf fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src11.arf
[Mon May 20 10:05:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 10:05:24 2013] Updating source flux to 3.8e-14
[Mon May 20 10:05:26 2013] Flag b found in src. 11 procflags, skipping spectral fitting
[Mon May 20 10:05:26 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 20 10:05:27 2013] xmm0070341201/analysis//spectral/fullrun_mos2_xmm0070341201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete