[Mon May 20 02:25:15 2013] Detection parameters:
  Position = (394.8, 361.9) = 15 58 19.63 63 56 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.6 +/- 11.7
  Background counts = 6.7
  Rate = 0.006 +/- 0.0008

[Mon May 20 02:25:16 2013] Off-axis axis estimate = 8.36'
[Mon May 20 03:51:08 2013] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Mon May 20 03:51:08 2013] Initial guess for spatial extent in simple fitting = 10.61"
[Mon May 20 03:51:08 2013] source mask rpix=2.4, npix_max = 34, mask sum = 35, frac = 1.013
[Mon May 20 03:51:08 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.61"
[Mon May 20 04:47:13 2013] fullrun_mos1_xmm0070341201_pi300-10000_cl_pass0_src5.ximg exists
[Mon May 20 04:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070341201_pi300-10000_cl_pass0_src5.csv
[Mon May 20 04:47:13 2013] fullrun_mos1_xmm0070341201_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon May 20 04:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070341201_pi300-10000_cl_pass0_src5.csv
[Mon May 20 04:47:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070341201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070341201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 04:47:13 2013] fullrun_mos1_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon May 20 04:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May 20 04:47:13 2013] fullrun_mos1_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon May 20 04:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May 20 04:47:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070341201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 05:47:52 2013] Warning, spatial fit 5 centroid is now closest to src. 11
[Mon May 20 05:47:52 2013] Vigneting correction estimate = 1.000000
[Mon May 20 05:47:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 05:47:52 2013] Assessing source extent using major
[Mon May 20 05:47:52 2013] Source does appear to be extended
[Mon May 20 05:47:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 06:58:19 2013] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Mon May 20 06:58:19 2013] Initial guess for spatial extent in simple fitting = 10.61"
[Mon May 20 06:58:19 2013] source mask rpix=2.4, npix_max = 34, mask sum = 35, frac = 1.013
[Mon May 20 06:58:19 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 10.61"
[Mon May 20 07:42:24 2013] fullrun_mos1_xmm0070341201_pi300-10000_cl_pass1_src5.ximg exists
[Mon May 20 07:42:24 2013] fullrun_mos1_xmm0070341201_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon May 20 07:42:24 2013] Fit fullrun_mos1_xmm0070341201_pi300-10000_cl_pass1_src5 appears to have run properly
[Mon May 20 07:42:24 2013] fullrun_mos1_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon May 20 07:42:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon May 20 07:42:24 2013] fullrun_mos1_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon May 20 07:42:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon May 20 07:42:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070341201_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 08:35:13 2013] Spatial fit model total counts = 158.444000, observed total counts = 144.000000
[Mon May 20 08:35:13 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 08:35:13 2013] Vigneting correction estimate = 1.000000
[Mon May 20 08:35:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 08:35:13 2013] Assessing source extent using major
[Mon May 20 08:35:13 2013] Source does appear to be extended
[Mon May 20 08:35:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 09:30:20 2013] XMMSAS src. selection expression = ellipse(34297.659912, 31433.403687, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 09:30:20 2013] Writing source region out to fullrun_mos1_xmm0070341201_pi300-10000_pass1_cl_src4_src.reg
[Mon May 20 09:30:20 2013] Extracting stamp from image fullrun_mos1_xmm0070341201_pi300-10000_cl_sm2.00.img.gz, (357, 324) - (432, 399)
[Mon May 20 09:30:20 2013] XMMSAS bgd. selection expression = annulus(34297.659912, 31433.403687, 1087.500000, 2175.000000, X, Y) && !ellipse(34428.258200, 30433.392000, 402.443212, 239.641607, 126.150100, X, Y) && !ellipse(36099.849600, 33886.588000, 922.296027, 261.792808, 19.568434, X, Y)
[Mon May 20 09:30:20 2013] Writing fullrun_mos1_xmm0070341201_pi300-10000_pass1_cl_src4.gif
[Mon May 20 09:31:52 2013] Mean detx,y = (7070.21, 3994.73) 
[Mon May 20 09:31:55 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 09:32:24 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 09:32:25 2013] Setting source spectrum file to fullrun_mos1_xmm0070341201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 20 09:32:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0070341201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon May 20 09:44:04 2013] Not generating rmf since there are only 86 counts
[Mon May 20 09:44:04 2013] rmf not generated due to insufficient counts
[Mon May 20 10:05:15 2013] Updating aperture counts using extracted products
[Mon May 20 10:05:15 2013] Total counts from fullrun_mos1_xmm0070341201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 125.00
[Mon May 20 10:05:16 2013] Total counts from fullrun_mos1_xmm0070341201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 350.00
[Mon May 20 10:05:16 2013] Got source and background scale factors 1105070.000000, 10090881.000000
[Mon May 20 10:05:16 2013] User source parameters:
  Position = (394.8, 361.9) = 15 58 19.63 63 56 45.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 86.7 +/- 12.2
  Background aperture counts = 38.3
  Rate = 0.004 +/- 0.0006

[Mon May 20 10:05:16 2013] Updating counts from extracted products
[Mon May 20 10:05:16 2013] Set source signif. to 86.67/6.19 = 14.00
[Mon May 20 10:05:19 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 10:05:19 2013] Using photon index=1.80, rate=0.00394, arf fullrun_mos1_xmm0070341201_pi300-10000_pass1_cl_src4.arf
[Mon May 20 10:05:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 10:05:19 2013] Updating source flux to 5.8e-14
[Mon May 20 10:05:25 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 10:05:26 2013] xmm0070341201/analysis//spectral/fullrun_mos1_xmm0070341201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete