[Sat Jun  8 20:47:28 2013] Detection parameters:
  Position = (371.9, 288.3) = 13 42 19.19 40 25 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.7 +/- 12.2
  Background counts = 31.2
  Rate = 0.003 +/- 0.0004

[Sat Jun  8 20:47:28 2013] Off-axis axis estimate = 5.38'
[Sat Jun  8 20:50:03 2013] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 20:50:03 2013] Initial guess for spatial extent in simple fitting = 9.12"
[Sat Jun  8 20:50:03 2013] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.816
[Sat Jun  8 20:50:03 2013] Giving source the simple spatial ID 57 for pass 0, mean size = 9.12"
[Sat Jun  8 22:47:12 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src57.ximg exists
[Sat Jun  8 22:47:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src57.csv
[Sat Jun  8 22:47:12 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src57_1.ximg exists
[Sat Jun  8 22:47:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src57.csv
[Sat Jun  8 22:47:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 22:47:13 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Sat Jun  8 22:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src57.csv
[Sat Jun  8 22:47:13 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Sat Jun  8 22:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src57.csv
[Sat Jun  8 22:47:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:54:27 2013] Spatial fit model total counts = 436.392000, observed total counts = 295.000000
[Sun Jun  9 00:54:27 2013] Poor agreement between spatial fit and data for source 59
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 00:54:27 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:54:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:54:27 2013] Assessing source extent using major
[Sun Jun  9 00:54:27 2013] Source does appear to be extended
[Sun Jun  9 00:54:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 00:55:08 2013] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:55:08 2013] Initial guess for spatial extent in simple fitting = 9.12"
[Sun Jun  9 00:55:08 2013] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.816
[Sun Jun  9 00:55:08 2013] Giving source the simple spatial ID 57 for pass 1, mean size = 9.12"
[Sun Jun  9 03:27:29 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src57.ximg exists
[Sun Jun  9 03:27:29 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src57.csv
[Sun Jun  9 03:27:29 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src57_1.ximg exists
[Sun Jun  9 03:27:29 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src57.csv
[Sun Jun  9 03:27:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 03:27:30 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Sun Jun  9 03:27:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src57.csv
[Sun Jun  9 03:27:30 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Sun Jun  9 03:27:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src57.csv
[Sun Jun  9 03:27:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 05:53:13 2013] Spatial fit model total counts = -226.685000, observed total counts = 295.000000
[Sun Jun  9 05:53:13 2013] Poor agreement between spatial fit and data for source 59
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 05:53:13 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 05:53:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 05:53:13 2013] Assessing source extent using major
[Sun Jun  9 05:53:13 2013] Source does appear to be extended
[Sun Jun  9 05:53:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 05:53:45 2013] XMMSAS src. selection expression = ellipse(32306.974701, 25031.828033, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 05:53:45 2013] Writing source region out to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src59_src.reg
[Sun Jun  9 05:53:45 2013] Extracting stamp from image fullrun_pn_xmm0070340701_pi300-10000_cl_sm2.00.img.gz, (334, 251) - (409, 326)
[Sun Jun  9 05:53:45 2013] XMMSAS bgd. selection expression = annulus(32306.974701, 25031.828033, 1087.500000, 2175.000000, X, Y) && !ellipse(29775.288800, 24792.654200, 463.402240, 463.402240, 0.000000, X, Y) && !ellipse(33828.668000, 22625.061800, 509.075215, 276.294408, 112.745456, X, Y)
[Sun Jun  9 05:53:45 2013] Writing fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src59.gif
[Sun Jun  9 06:26:36 2013] Mean detx,y = (2833.76, 6520.25) 
[Sun Jun  9 06:26:38 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 06:27:01 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 06:27:01 2013] Setting source spectrum file to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Sun Jun  9 06:27:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Sun Jun  9 07:21:08 2013] Not generating rmf since there are only 88 counts
[Sun Jun  9 07:21:08 2013] rmf not generated due to insufficient counts
[Sun Jun  9 08:38:19 2013] Updating aperture counts using extracted products
[Sun Jun  9 08:38:19 2013] Total counts from fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src59_src_b10.pi.gz = 240.00
[Sun Jun  9 08:38:19 2013] Total counts from fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src59_bgd.pi.gz = 1541.00
[Sun Jun  9 08:38:19 2013] Got source and background scale factors 1008122.000000, 9724397.000000
[Sun Jun  9 08:38:19 2013] User source parameters:
  Position = (371.9, 288.3) = 13 42 19.19 40 25 58.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 80.2 +/- 16.5
  Background aperture counts = 159.8
  Rate = 0.003 +/- 0.0005

[Sun Jun  9 08:38:19 2013] Updating counts from extracted products
[Sun Jun  9 08:38:19 2013] Set source signif. to 80.25/12.64 = 6.35
[Sun Jun  9 08:38:22 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 08:38:22 2013] Using photon index=1.80, rate=0.00252, arf fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src59.arf
[Sun Jun  9 08:38:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 08:38:22 2013] Updating source flux to 1.2e-14
[Sun Jun  9 08:38:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 08:38:54 2013] xmm0070340701/analysis//spectral/fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src59_pl.csv not found, spectral fit skipped or did not complete