[Sat Jun 8 20:47:28 2013] Detection parameters: Position = (447.5, 343.7) = 13 41 50.34 40 29 52.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 63.6 +/- 11.6 Background counts = 27.7 Rate = 0.002 +/- 0.0004 [Sat Jun 8 20:47:28 2013] Off-axis axis estimate = 11.29' [Sat Jun 8 20:50:03 2013] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 20:50:03 2013] Initial guess for spatial extent in simple fitting = 12.07" [Sat Jun 8 20:50:03 2013] source mask rpix=2.8, npix_max = 42, mask sum = 46, frac = 1.072 [Sat Jun 8 20:50:03 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 12.07" [Sat Jun 8 22:47:12 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src47.ximg exists [Sat Jun 8 22:47:12 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src47.csv [Sat Jun 8 22:47:12 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src47_1.ximg exists [Sat Jun 8 22:47:12 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src47.csv [Sat Jun 8 22:47:12 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src47_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 22:47:13 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src47.ximg exists [Sat Jun 8 22:47:13 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src47.csv [Sat Jun 8 22:47:13 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists [Sat Jun 8 22:47:13 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src47.csv [Sat Jun 8 22:47:13 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src47_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 00:54:27 2013] Warning, spatial fit 47 centroid is now closest to src. 41 [Sun Jun 9 00:54:27 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 00:54:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 00:54:27 2013] Assessing source extent using major [Sun Jun 9 00:54:27 2013] Source does appear to be extended [Sun Jun 9 00:54:27 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 00:55:08 2013] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 00:55:08 2013] Initial guess for spatial extent in simple fitting = 12.07" [Sun Jun 9 00:55:08 2013] source mask rpix=2.8, npix_max = 42, mask sum = 46, frac = 1.072 [Sun Jun 9 00:55:08 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 12.07" [Sun Jun 9 03:27:29 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src47.ximg exists [Sun Jun 9 03:27:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src47.csv [Sun Jun 9 03:27:29 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src47_1.ximg exists [Sun Jun 9 03:27:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src47.csv [Sun Jun 9 03:27:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src47_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 03:27:30 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src47.ximg exists [Sun Jun 9 03:27:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src47.csv [Sun Jun 9 03:27:30 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists [Sun Jun 9 03:27:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src47.csv [Sun Jun 9 03:27:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src47_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 05:53:13 2013] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 10.804542 pixels away [Sun Jun 9 05:53:13 2013] Spatial fit model total counts = 317.251000, observed total counts = 269.000000 [Sun Jun 9 05:53:13 2013] Poor agreement between spatial fit and data for source 49 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 9 05:53:13 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 05:53:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 05:53:13 2013] Assessing source extent using major [Sun Jun 9 05:53:13 2013] Source does appear to be extended [Sun Jun 9 05:53:13 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 05:53:45 2013] XMMSAS src. selection expression = ellipse(38882.210510, 29852.121338, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 05:53:45 2013] Writing source region out to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src49_src.reg [Sun Jun 9 05:53:45 2013] Extracting stamp from image fullrun_pn_xmm0070340701_pi300-10000_cl_sm2.00.img.gz, (410, 306) - (485, 381) [Sun Jun 9 05:53:45 2013] XMMSAS bgd. selection expression = annulus(38882.210510, 29852.121338, 1087.500000, 2175.000000, X, Y) && !ellipse(38709.214111, 31280.991730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37726.667200, 30389.630400, 521.748015, 521.748015, 0.000000, X, Y) && !ellipse(37061.824188, 27350.738586, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 9 05:53:45 2013] Writing fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src49.gif [Sun Jun 9 06:21:43 2013] Mean detx,y = (10916.88, 7622.17) [Sun Jun 9 06:21:47 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 06:22:03 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 06:22:03 2013] Setting source spectrum file to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src49_src_b10.pi.gz [Sun Jun 9 06:22:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src49_bgd.pi.gz [Sun Jun 9 07:16:57 2013] Not generating rmf since there are only 63 counts [Sun Jun 9 07:16:57 2013] rmf not generated due to insufficient counts [Sun Jun 9 08:38:17 2013] Updating aperture counts using extracted products [Sun Jun 9 08:38:17 2013] Total counts from fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 183.00 [Sun Jun 9 08:38:17 2013] Total counts from fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src49_bgd.pi.gz = 1111.00 [Sun Jun 9 08:38:17 2013] Got source and background scale factors 1088571.000000, 8292684.000000 [Sun Jun 9 08:38:17 2013] User source parameters: Position = (447.5, 343.7) = 13 41 50.34 40 29 52.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 37.2 +/- 14.6 Background aperture counts = 145.8 Rate = 0.001 +/- 0.0005 [Sun Jun 9 08:38:17 2013] Updating counts from extracted products [Sun Jun 9 08:38:17 2013] Set source signif. to 37.16/12.08 = 3.08 [Sun Jun 9 08:38:22 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 08:38:22 2013] Using photon index=1.80, rate=0.00117, arf fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src49.arf [Sun Jun 9 08:38:22 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 08:38:22 2013] Updating source flux to 6.5e-15 [Sun Jun 9 08:38:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 08:38:54 2013] xmm0070340701/analysis//spectral/fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete