[Sat Jun  8 20:47:28 2013] Detection parameters:
  Position = (297.6, 348.2) = 13 42 47.50 40 30 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.9 +/- 13.4
  Background counts = 37.5
  Rate = 0.003 +/- 0.0005

[Sat Jun  8 20:47:28 2013] Off-axis axis estimate = 3.61'
[Sat Jun  8 20:50:03 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 20:50:03 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Sat Jun  8 20:50:03 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.092
[Sat Jun  8 20:50:03 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 8.23"
[Sat Jun  8 22:47:12 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src46.ximg exists
[Sat Jun  8 22:47:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src46.csv
[Sat Jun  8 22:47:12 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src46_1.ximg exists
[Sat Jun  8 22:47:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src46.csv
[Sat Jun  8 22:47:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 22:47:13 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sat Jun  8 22:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src46.csv
[Sat Jun  8 22:47:13 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sat Jun  8 22:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src46.csv
[Sat Jun  8 22:47:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:54:27 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 10.906362 pixels away
[Sun Jun  9 00:54:27 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:54:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:54:27 2013] Assessing source extent using major
[Sun Jun  9 00:54:27 2013] Source does appear to be extended
[Sun Jun  9 00:54:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 00:55:08 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:55:08 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Sun Jun  9 00:55:08 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.092
[Sun Jun  9 00:55:08 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 8.23"
[Sun Jun  9 03:27:29 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src46.ximg exists
[Sun Jun  9 03:27:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src46.csv
[Sun Jun  9 03:27:29 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src46_1.ximg exists
[Sun Jun  9 03:27:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src46.csv
[Sun Jun  9 03:27:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 03:27:30 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Sun Jun  9 03:27:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src46.csv
[Sun Jun  9 03:27:30 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Sun Jun  9 03:27:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src46.csv
[Sun Jun  9 03:27:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 05:53:13 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 10.618051 pixels away
[Sun Jun  9 05:53:13 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 05:53:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 05:53:13 2013] Assessing source extent using major
[Sun Jun  9 05:53:13 2013] Source does appear to be extended
[Sun Jun  9 05:53:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 05:53:45 2013] XMMSAS src. selection expression = ellipse(25842.193420, 30244.486877, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 05:53:45 2013] Writing source region out to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src48_src.reg
[Sun Jun  9 05:53:45 2013] Extracting stamp from image fullrun_pn_xmm0070340701_pi300-10000_cl_sm2.00.img.gz, (260, 311) - (335, 386)
[Sun Jun  9 05:53:45 2013] XMMSAS bgd. selection expression = annulus(25842.193420, 30244.486877, 1087.500000, 2175.000000, X, Y) && !ellipse(24598.725200, 32369.622200, 461.254413, 408.802412, 326.456617, X, Y) && !ellipse(28612.116455, 30121.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25331.380200, 28027.256000, 1025.304030, 509.866415, 13.049000, X, Y) && !ellipse(23893.526703, 30989.976624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26468.311740, 28957.144000, 393.224011, 393.224011, 0.000000, X, Y) && !ellipse(26053.201874, 28307.884613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.024872, 27468.351074, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 05:53:45 2013] Writing fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src48.gif
[Sun Jun  9 06:21:01 2013] Mean detx,y = (1880.45, -1751.93) 
[Sun Jun  9 06:21:04 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 06:21:33 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 06:21:33 2013] Setting source spectrum file to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun Jun  9 06:21:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sun Jun  9 07:16:10 2013] Not generating rmf since there are only 74 counts
[Sun Jun  9 07:16:10 2013] rmf not generated due to insufficient counts
[Sun Jun  9 08:38:17 2013] Updating aperture counts using extracted products
[Sun Jun  9 08:38:17 2013] Total counts from fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 284.00
[Sun Jun  9 08:38:17 2013] Total counts from fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src48_bgd.pi.gz = 1192.00
[Sun Jun  9 08:38:17 2013] Got source and background scale factors 1231832.000000, 6130313.000000
[Sun Jun  9 08:38:17 2013] User source parameters:
  Position = (297.6, 348.2) = 13 42 47.50 40 30 13.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 44.5 +/- 17.9
  Background aperture counts = 239.5
  Rate = 0.001 +/- 0.0006

[Sun Jun  9 08:38:17 2013] Updating counts from extracted products
[Sun Jun  9 08:38:17 2013] Set source signif. to 44.48/15.48 = 2.87
[Sun Jun  9 08:38:22 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 08:38:22 2013] Using photon index=1.80, rate=0.0014, arf fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src48.arf
[Sun Jun  9 08:38:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 08:38:22 2013] Updating source flux to 3.6e-15
[Sun Jun  9 08:38:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 08:38:54 2013] xmm0070340701/analysis//spectral/fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete