[Sat Jun  8 20:47:28 2013] Detection parameters:
  Position = (434.6, 350.0) = 13 41 55.23 40 30 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.6 +/- 12.3
  Background counts = 28.3
  Rate = 0.002 +/- 0.0004

[Sat Jun  8 20:47:28 2013] Off-axis axis estimate = 10.56'
[Sat Jun  8 20:50:03 2013] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 20:50:03 2013] Initial guess for spatial extent in simple fitting = 11.71"
[Sat Jun  8 20:50:03 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.031
[Sat Jun  8 20:50:03 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 11.71"
[Sat Jun  8 22:47:12 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src45.ximg exists
[Sat Jun  8 22:47:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src45.csv
[Sat Jun  8 22:47:12 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src45_1.ximg exists
[Sat Jun  8 22:47:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src45.csv
[Sat Jun  8 22:47:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 22:47:13 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sat Jun  8 22:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src45.csv
[Sat Jun  8 22:47:13 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sat Jun  8 22:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src45.csv
[Sat Jun  8 22:47:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:54:27 2013] Warning, spatial fit 45 centroid is now closest to src. 41
[Sun Jun  9 00:54:27 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:54:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:54:27 2013] Assessing source extent using major
[Sun Jun  9 00:54:27 2013] Source does appear to be extended
[Sun Jun  9 00:54:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 00:55:08 2013] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:55:08 2013] Initial guess for spatial extent in simple fitting = 11.71"
[Sun Jun  9 00:55:08 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.031
[Sun Jun  9 00:55:08 2013] Giving source the simple spatial ID 45 for pass 1, mean size = 11.71"
[Sun Jun  9 03:27:29 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src45.ximg exists
[Sun Jun  9 03:27:29 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src45_1.ximg exists
[Sun Jun  9 03:27:29 2013] Fit fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src45 appears to have run properly
[Sun Jun  9 03:27:30 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Sun Jun  9 03:27:30 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Sun Jun  9 03:27:30 2013] Fit fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Sun Jun  9 05:53:13 2013] Spatial fit model total counts = 342.546000, observed total counts = 324.000000
[Sun Jun  9 05:53:13 2013] Offset between fit and detection position for source 47 = 0.455425 pixels
[Sun Jun  9 05:53:13 2013] 330.363500 total counts/ 274.924000 bgd. counts: snr = 3.343590
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.455425 pixels
  Position = (434.2, 349.9) = 13 41 55.40 40 30 20.4
  Extent = 6.5 (4.7-9.6)", rotation angle = 0
  Source counts = 55.4 +/- 18.2
  Background counts = 274.9
  Rate = 0.002 +/- 0.0006
[Sun Jun  9 05:53:13 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 05:53:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 05:53:13 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 05:53:13 2013] Source does appear to be extended
[Sun Jun  9 05:53:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 05:53:45 2013] XMMSAS src. selection expression = ellipse(37726.667200, 30389.630400, 391.311011, 391.311011, 0.000000, X, Y)
[Sun Jun  9 05:53:45 2013] Writing source region out to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src47_src.reg
[Sun Jun  9 05:53:45 2013] Extracting stamp from image fullrun_pn_xmm0070340701_pi300-10000_cl_sm2.00.img.gz, (412, 327) - (457, 372)
[Sun Jun  9 05:53:45 2013] XMMSAS bgd. selection expression = annulus(37726.667200, 30389.630400, 652.185019, 1304.370038, X, Y) && !ellipse(38709.214111, 31280.991730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38882.210510, 29852.121338, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 05:53:45 2013] Writing fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src47.gif
[Sun Jun  9 06:20:40 2013] Mean detx,y = (10537.58, 6445.31) 
[Sun Jun  9 06:20:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 06:20:52 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 06:20:53 2013] Setting source spectrum file to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sun Jun  9 06:20:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Sun Jun  9 07:16:00 2013] Not generating rmf since there are only 55 counts
[Sun Jun  9 07:16:00 2013] rmf not generated due to insufficient counts
[Sun Jun  9 08:38:17 2013] Updating aperture counts using extracted products
[Sun Jun  9 08:38:17 2013] Total counts from fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 120.00
[Sun Jun  9 08:38:17 2013] Total counts from fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src47_bgd.pi.gz = 320.00
[Sun Jun  9 08:38:17 2013] Got source and background scale factors 476800.000000, 2299830.000000
[Sun Jun  9 08:38:17 2013] User source parameters:
  Position = (434.2, 349.9) = 13 41 55.40 40 30 20.4
  Extent = 6.5 (4.7-9.6)", rotation angle = 0
  Source aperture counts = 53.7 +/- 12.0
  Background aperture counts = 66.3
  Rate = 0.002 +/- 0.0004

[Sun Jun  9 08:38:22 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 08:38:22 2013] Using photon index=1.80, rate=0.00174, arf fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src47.arf
[Sun Jun  9 08:38:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 08:38:22 2013] Updating source flux to 9.3e-15
[Sun Jun  9 08:38:45 2013] Source 47 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 08:38:54 2013] xmm0070340701/analysis//spectral/fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete