[Sat Jun 8 20:47:28 2013] Detection parameters: Position = (390.0, 431.5) = 13 42 12.22 40 36 11.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 94.5 +/- 13.0 Background counts = 28.6 Rate = 0.003 +/- 0.0004 [Sat Jun 8 20:47:28 2013] Off-axis axis estimate = 11.71' [Sat Jun 8 20:50:03 2013] Using EEF radius (= 12.28 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 20:50:03 2013] Initial guess for spatial extent in simple fitting = 12.28" [Sat Jun 8 20:50:03 2013] source mask rpix=2.8, npix_max = 44, mask sum = 27, frac = 0.611 [Sat Jun 8 20:50:03 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 12.28" [Sat Jun 8 22:47:11 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src29.ximg exists [Sat Jun 8 22:47:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src29.csv [Sat Jun 8 22:47:11 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src29_1.ximg exists [Sat Jun 8 22:47:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src29.csv [Sat Jun 8 22:47:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 22:47:12 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Sat Jun 8 22:47:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src29.csv [Sat Jun 8 22:47:12 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Sat Jun 8 22:47:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src29.csv [Sat Jun 8 22:47:12 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 00:54:27 2013] Source 31 is offset by -0.530555 and -8.003501 pixels which is larger than 2 X fitted extent = 1.918170 x 1.918170, not incorporating fit results [Sun Jun 9 00:54:27 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 00:54:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 00:54:27 2013] Assessing source extent using major [Sun Jun 9 00:54:27 2013] Source does appear to be extended [Sun Jun 9 00:54:27 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 00:55:08 2013] Using EEF radius (= 12.28 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 00:55:08 2013] Initial guess for spatial extent in simple fitting = 12.28" [Sun Jun 9 00:55:08 2013] source mask rpix=2.8, npix_max = 44, mask sum = 27, frac = 0.611 [Sun Jun 9 00:55:08 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 12.28" [Sun Jun 9 03:27:28 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src29.ximg exists [Sun Jun 9 03:27:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src29.csv [Sun Jun 9 03:27:28 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src29_1.ximg exists [Sun Jun 9 03:27:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src29.csv [Sun Jun 9 03:27:28 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 03:27:29 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Sun Jun 9 03:27:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src29.csv [Sun Jun 9 03:27:29 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Sun Jun 9 03:27:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src29.csv [Sun Jun 9 03:27:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 05:53:13 2013] Spatial fit model total counts = 459.102000, observed total counts = 400.000000 [Sun Jun 9 05:53:13 2013] Poor agreement between spatial fit and data for source 31 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 9 05:53:13 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 05:53:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 05:53:13 2013] Assessing source extent using major [Sun Jun 9 05:53:13 2013] Source does appear to be extended [Sun Jun 9 05:53:13 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 05:53:44 2013] XMMSAS src. selection expression = ellipse(33877.618347, 37496.237427, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 05:53:44 2013] Writing source region out to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src31_src.reg [Sun Jun 9 05:53:44 2013] Extracting stamp from image fullrun_pn_xmm0070340701_pi300-10000_cl_sm2.00.img.gz, (352, 394) - (427, 469) [Sun Jun 9 05:53:44 2013] XMMSAS bgd. selection expression = annulus(33877.618347, 37496.237427, 1087.500000, 2175.000000, X, Y) && !ellipse(31312.891907, 35540.123352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32815.313600, 35163.925000, 591.706417, 591.706417, 0.000000, X, Y) [Sun Jun 9 05:53:44 2013] Writing fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src31.gif [Sun Jun 9 06:12:13 2013] Mean detx,y = (12684.23, -1396.10) [Sun Jun 9 06:12:15 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 06:12:40 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 06:12:41 2013] Setting source spectrum file to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src31_src_b10.pi.gz [Sun Jun 9 06:12:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src31_bgd.pi.gz [Sun Jun 9 06:59:15 2013] Not generating rmf since there are only 94 counts [Sun Jun 9 06:59:15 2013] rmf not generated due to insufficient counts [Sun Jun 9 08:38:14 2013] Updating aperture counts using extracted products [Sun Jun 9 08:38:14 2013] Total counts from fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 240.00 [Sun Jun 9 08:38:14 2013] Total counts from fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src31_bgd.pi.gz = 1132.00 [Sun Jun 9 08:38:14 2013] Got source and background scale factors 1049478.000000, 7863250.000000 [Sun Jun 9 08:38:14 2013] User source parameters: Position = (390.0, 431.5) = 13 42 12.22 40 36 11.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 88.9 +/- 16.5 Background aperture counts = 151.1 Rate = 0.003 +/- 0.0005 [Sun Jun 9 08:38:14 2013] Updating counts from extracted products [Sun Jun 9 08:38:14 2013] Set source signif. to 88.92/12.29 = 7.23 [Sun Jun 9 08:38:22 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 08:38:22 2013] Using photon index=1.80, rate=0.00279, arf fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src31.arf [Sun Jun 9 08:38:22 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 08:38:22 2013] Updating source flux to 1.7e-14 [Sun Jun 9 08:38:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 08:38:54 2013] xmm0070340701/analysis//spectral/fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete