[Sat Jun  8 20:47:27 2013] Detection parameters:
  Position = (283.4, 372.8) = 13 42 52.91 40 32 0.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2240.9 +/- 57.3
  Background counts = 35.3
  Rate = 0.09 +/- 0.002

[Sat Jun  8 20:47:28 2013] Off-axis axis estimate = 5.50'
[Sat Jun  8 20:50:03 2013] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 20:50:03 2013] Initial guess for spatial extent in simple fitting = 9.18"
[Sat Jun  8 20:50:03 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.918
[Sat Jun  8 20:50:03 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.18"
[Sat Jun  8 22:47:11 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  8 22:47:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src1.csv
[Sat Jun  8 22:47:11 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  8 22:47:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src1.csv
[Sat Jun  8 22:47:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 22:47:12 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  8 22:47:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun  8 22:47:12 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  8 22:47:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun  8 22:47:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:54:27 2013] Warning, spatial fit 1 centroid is now closest to src. 42
[Sun Jun  9 00:54:27 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:54:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:54:27 2013] Assessing source extent using major
[Sun Jun  9 00:54:27 2013] Source does appear to be extended
[Sun Jun  9 00:54:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 00:55:08 2013] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 00:55:08 2013] Initial guess for spatial extent in simple fitting = 9.18"
[Sun Jun  9 00:55:08 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.918
[Sun Jun  9 00:55:08 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.18"
[Sun Jun  9 03:27:28 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  9 03:27:28 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  9 03:27:28 2013] Fit fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Jun  9 03:27:29 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  9 03:27:29 2013] fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  9 03:27:29 2013] Fit fullrun_pn_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  9 05:53:13 2013] Spatial fit model total counts = 2373.050000, observed total counts = 2264.000000
[Sun Jun  9 05:53:13 2013] Offset between fit and detection position for source 1 = 0.201923 pixels
[Sun Jun  9 05:53:13 2013] 2392.480000 total counts/ 802.940000 bgd. counts: snr = 56.095744
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.201923 pixels
  Position = (283.3, 372.6) = 13 42 52.96 40 32 0.1
  Extent = 5.8 (5.5-6.1)" x 5.1 (4.8-5.4)", rotation angle = 326 (307-342) degrees
  Source counts = 1589.5 +/- 48.9
  Background counts = 802.9
  Rate = 0.05 +/- 0.002
[Sun Jun  9 05:53:13 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 05:53:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 05:53:13 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 05:53:13 2013] Source does appear to be extended
[Sun Jun  9 05:53:13 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Sun Jun  9 05:53:44 2013] Counts = 1589.540000, rescaling region sizes by 2.000000
[Sun Jun  9 05:53:44 2013] XMMSAS src. selection expression = ellipse(24598.725200, 32369.622200, 691.881620, 613.203618, 326.456617, X, Y)
[Sun Jun  9 05:53:44 2013] Writing source region out to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun  9 05:53:44 2013] Extracting stamp from image fullrun_pn_xmm0070340701_pi300-10000_cl_sm2.00.img.gz, (244, 333) - (323, 412)
[Sun Jun  9 05:53:44 2013] XMMSAS bgd. selection expression = annulus(24598.725200, 32369.622200, 2306.272066, 4612.544133, X, Y) && !ellipse(21969.178000, 32619.432000, 645.661619, 449.196013, 119.097095, X, Y) && !ellipse(22859.660950, 36413.853668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26315.060120, 36350.242600, 447.812813, 447.812813, 0.000000, X, Y) && !ellipse(21479.568756, 34917.930511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28612.116455, 30121.944000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25331.380200, 28027.256000, 1025.304030, 509.866415, 13.049000, X, Y) && !ellipse(20402.964000, 36072.602000, 1751.504050, 1751.504050, 0.000000, X, Y) && !ellipse(20678.781800, 34805.798000, 478.361614, 241.646407, 0.918655, X, Y) && !ellipse(26016.276200, 33525.008600, 408.613612, 192.136806, 38.113765, X, Y) && !ellipse(22726.184662, 33100.536407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20078.148600, 31715.673800, 529.447215, 346.836010, 109.157600, X, Y) && !ellipse(19990.850000, 31992.416000, 1546.920045, 1546.920045, 0.000000, X, Y) && !ellipse(23893.526703, 30989.976624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22223.013754, 30977.527600, 507.526415, 507.526415, 0.000000, X, Y) && !ellipse(20915.220620, 30907.956800, 403.034412, 301.416009, 288.748000, X, Y) && !ellipse(25842.193420, 30244.486877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21351.042770, 29622.410858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26468.311740, 28957.144000, 393.224011, 393.224011, 0.000000, X, Y) && !ellipse(26053.201874, 28307.884613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.024872, 27468.351074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.352600, 27308.776000, 538.257615, 337.787210, 346.455500, X, Y)
[Sun Jun  9 05:53:44 2013] Writing fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src1.gif
[Sun Jun  9 05:53:54 2013] Mean detx,y = (2456.37, -4085.93) 
[Sun Jun  9 05:53:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 05:54:45 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 05:54:46 2013] Setting source spectrum file to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  9 05:54:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun  9 08:38:07 2013] Updating aperture counts using extracted products
[Sun Jun  9 08:38:08 2013] Total counts from fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2132.00
[Sun Jun  9 08:38:08 2013] Total counts from fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src1_bgd.pi.gz = 5425.00
[Sun Jun  9 08:38:08 2013] Got source and background scale factors 1280281.000000, 30002886.000000
[Sun Jun  9 08:38:08 2013] User source parameters:
  Position = (283.3, 372.6) = 13 42 52.96 40 32 0.1
  Extent = 5.8 (5.5-6.1)" x 5.1 (4.8-5.4)", rotation angle = 326 (307-342) degrees
  Source aperture counts = 1900.5 +/- 47.2
  Background aperture counts = 231.5
  Rate = 0.06 +/- 0.001

[Sun Jun  9 08:38:22 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 08:38:22 2013] Using photon index=1.80, rate=0.0499, arf fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src1.arf
[Sun Jun  9 08:38:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 08:38:22 2013] Updating source flux to 1.6e-13
[Sun Jun  9 08:38:54 2013] xmm0070340701/analysis//spectral/fullrun_pn_xmm0070340701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete