[Sat Jun  8 20:48:29 2013] Detection parameters:
  Position = (390.4, 429.7) = 13 42 12.06 40 36 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.5 +/- 12.4
  Background counts = 9.8
  Rate = 0.003 +/- 0.0003

[Sat Jun  8 20:48:30 2013] Off-axis axis estimate = 11.62'
[Sat Jun  8 23:48:59 2013] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 23:48:59 2013] Initial guess for spatial extent in simple fitting = 12.24"
[Sat Jun  8 23:48:59 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.116
[Sat Jun  8 23:48:59 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 12.24"
[Sun Jun  9 00:53:58 2013] fullrun_mos2_xmm0070340701_pi300-10000_cl_pass0_src21.ximg exists
[Sun Jun  9 00:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070340701_pi300-10000_cl_pass0_src21.csv
[Sun Jun  9 00:53:58 2013] fullrun_mos2_xmm0070340701_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Jun  9 00:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070340701_pi300-10000_cl_pass0_src21.csv
[Sun Jun  9 00:53:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0070340701_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0070340701_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:54:01 2013] fullrun_mos2_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Jun  9 00:54:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Jun  9 00:54:01 2013] fullrun_mos2_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Jun  9 00:54:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Jun  9 00:54:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:54:48 2013] Warning, spatial fit 21 centroid is now closest to src. 6
[Sun Jun  9 00:54:48 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:54:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:54:48 2013] Assessing source extent using major
[Sun Jun  9 00:54:48 2013] Source does appear to be extended
[Sun Jun  9 00:54:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 04:41:11 2013] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 04:41:11 2013] Initial guess for spatial extent in simple fitting = 12.24"
[Sun Jun  9 04:41:11 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.116
[Sun Jun  9 04:41:11 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 12.24"
[Sun Jun  9 05:52:57 2013] fullrun_mos2_xmm0070340701_pi300-10000_cl_pass1_src21.ximg exists
[Sun Jun  9 05:52:57 2013] fullrun_mos2_xmm0070340701_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Jun  9 05:52:57 2013] Fit fullrun_mos2_xmm0070340701_pi300-10000_cl_pass1_src21 appears to have run properly
[Sun Jun  9 05:52:58 2013] fullrun_mos2_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Jun  9 05:52:58 2013] fullrun_mos2_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Jun  9 05:52:58 2013] Fit fullrun_mos2_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Jun  9 05:53:28 2013] Spatial fit model total counts = 200.018000, observed total counts = 196.000000
[Sun Jun  9 05:53:28 2013] Offset between fit and detection position for source 7 = 0.194206 pixels
[Sun Jun  9 05:53:28 2013] 200.232900 total counts/ 131.011000 bgd. counts: snr = 6.047692
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.194206 pixels
  Position = (390.4, 429.6) = 13 42 12.05 40 36 7.5
  Extent = 7.7 (5.7-10.4)" x 4.4 (3.1-5.9)", rotation angle = 35 (8-54) degrees
  Source counts = 69.2 +/- 14.2
  Background counts = 131.0
  Rate = 0.002 +/- 0.0004
[Sun Jun  9 05:53:28 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 05:53:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 05:53:28 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 05:53:28 2013] Source does appear to be extended
[Sun Jun  9 05:53:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Sun Jun  9 08:02:46 2013] XMMSAS src. selection expression = ellipse(33917.897000, 37323.265800, 459.235813, 265.124408, 35.274703, X, Y)
[Sun Jun  9 08:02:46 2013] Writing source region out to fullrun_mos2_xmm0070340701_pi300-10000_pass1_cl_src7_src.reg
[Sun Jun  9 08:02:46 2013] Extracting stamp from image fullrun_mos2_xmm0070340701_pi300-10000_cl_sm2.00.img.gz, (364, 403) - (417, 456)
[Sun Jun  9 08:02:46 2013] XMMSAS bgd. selection expression = annulus(33917.897000, 37323.265800, 765.393022, 1530.786044, X, Y) && !ellipse(33694.421326, 35847.697876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32794.254883, 35128.758423, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 08:02:46 2013] Writing fullrun_mos2_xmm0070340701_pi300-10000_pass1_cl_src7.gif
[Sun Jun  9 08:08:59 2013] Mean detx,y = (-12468.13, 1169.86) 
[Sun Jun  9 08:09:00 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 08:09:08 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 08:09:08 2013] Setting source spectrum file to fullrun_mos2_xmm0070340701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jun  9 08:09:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0070340701_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jun  9 08:31:37 2013] Not generating rmf since there are only 69 counts
[Sun Jun  9 08:31:37 2013] rmf not generated due to insufficient counts
[Sun Jun  9 08:38:32 2013] Updating aperture counts using extracted products
[Sun Jun  9 08:38:32 2013] Total counts from fullrun_mos2_xmm0070340701_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 86.00
[Sun Jun  9 08:38:32 2013] Total counts from fullrun_mos2_xmm0070340701_pi300-10000_pass1_cl_src7_bgd.pi.gz = 244.00
[Sun Jun  9 08:38:32 2013] Got source and background scale factors 379200.000000, 4253676.000000
[Sun Jun  9 08:38:32 2013] User source parameters:
  Position = (390.4, 429.6) = 13 42 12.05 40 36 7.5
  Extent = 7.7 (5.7-10.4)" x 4.4 (3.1-5.9)", rotation angle = 35 (8-54) degrees
  Source aperture counts = 64.2 +/- 10.3
  Background aperture counts = 21.8
  Rate = 0.002 +/- 0.0003

[Sun Jun  9 08:38:35 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 08:38:35 2013] Using photon index=1.80, rate=0.00193, arf fullrun_mos2_xmm0070340701_pi300-10000_pass1_cl_src7.arf
[Sun Jun  9 08:38:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 08:38:36 2013] Updating source flux to 4.4e-14
[Sun Jun  9 08:38:41 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 08:38:45 2013] xmm0070340701/analysis//spectral/fullrun_mos2_xmm0070340701_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete