[Sat Jun 8 20:47:57 2013] Detection parameters: Position = (282.1, 375.2) = 13 42 53.40 40 32 5.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 105.0 +/- 15.0 Background counts = 13.6 Rate = 0.005 +/- 0.0007 [Sat Jun 8 20:47:58 2013] Off-axis axis estimate = 5.69' [Sat Jun 8 22:47:13 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 22:47:13 2013] Initial guess for spatial extent in simple fitting = 9.27" [Sat Jun 8 22:47:13 2013] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.541 [Sat Jun 8 22:47:13 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 9.27" [Sat Jun 8 23:48:58 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src9.ximg exists [Sat Jun 8 23:48:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src9.csv [Sat Jun 8 23:48:58 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src9_1.ximg exists [Sat Jun 8 23:48:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src9.csv [Sat Jun 8 23:48:58 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 23:48:59 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Sat Jun 8 23:48:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src9.csv [Sat Jun 8 23:48:59 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Sat Jun 8 23:48:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src9.csv [Sat Jun 8 23:48:59 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 00:54:37 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.061451 pixels away [Sun Jun 9 00:54:37 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 00:54:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 00:54:37 2013] Assessing source extent using major [Sun Jun 9 00:54:37 2013] Source does appear to be extended [Sun Jun 9 00:54:37 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 03:27:30 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 03:27:30 2013] Initial guess for spatial extent in simple fitting = 9.27" [Sun Jun 9 03:27:30 2013] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.541 [Sun Jun 9 03:27:30 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 9.27" [Sun Jun 9 04:41:09 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src9.ximg exists [Sun Jun 9 04:41:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src9.csv [Sun Jun 9 04:41:10 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src9_1.ximg exists [Sun Jun 9 04:41:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src9.csv [Sun Jun 9 04:41:10 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 04:41:10 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists [Sun Jun 9 04:41:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src9.csv [Sun Jun 9 04:41:10 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists [Sun Jun 9 04:41:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src9.csv [Sun Jun 9 04:41:10 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 05:53:21 2013] Spatial fit model total counts = 767.774000, observed total counts = 642.000000 [Sun Jun 9 05:53:21 2013] Poor agreement between spatial fit and data for source 8 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 9 05:53:21 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 05:53:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 05:53:21 2013] Assessing source extent using major [Sun Jun 9 05:53:21 2013] Source does appear to be extended [Sun Jun 9 05:53:21 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 07:26:14 2013] XMMSAS src. selection expression = ellipse(24497.198059, 32595.910919, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 07:26:14 2013] Writing source region out to fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src8_src.reg [Sun Jun 9 07:26:14 2013] Extracting stamp from image fullrun_mos1_xmm0070340701_pi300-10000_cl_sm2.00.img.gz, (245, 338) - (320, 413) [Sun Jun 9 07:26:14 2013] XMMSAS bgd. selection expression = annulus(24497.198059, 32595.910919, 1087.500000, 2175.000000, X, Y) && !ellipse(21960.197400, 32676.702600, 448.588813, 396.378411, 91.796237, X, Y) [Sun Jun 9 07:26:14 2013] Writing fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src8.gif [Sun Jun 9 07:28:33 2013] Mean detx,y = (4204.52, 2139.32) [Sun Jun 9 07:28:34 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 07:28:46 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 07:28:46 2013] Setting source spectrum file to fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Sun Jun 9 07:28:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src8_bgd.pi.gz [Sun Jun 9 07:49:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 9 07:49:59 2013] rmf not generated due to insufficient counts [Sun Jun 9 08:38:24 2013] Updating aperture counts using extracted products [Sun Jun 9 08:38:24 2013] Total counts from fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 603.00 [Sun Jun 9 08:38:24 2013] Total counts from fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src8_bgd.pi.gz = 765.00 [Sun Jun 9 08:38:24 2013] Got source and background scale factors 1125984.000000, 10421852.000000 [Sun Jun 9 08:38:24 2013] User source parameters: Position = (282.1, 375.2) = 13 42 53.40 40 32 5.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 520.3 +/- 25.6 Background aperture counts = 82.7 Rate = 0.01 +/- 0.0007 [Sun Jun 9 08:38:24 2013] Updating counts from extracted products [Sun Jun 9 08:38:24 2013] Set source signif. to 520.35/9.09 = 57.24 [Sun Jun 9 08:38:28 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 08:38:28 2013] Using photon index=1.80, rate=0.0145, arf fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src8.arf [Sun Jun 9 08:38:28 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 08:38:28 2013] Updating source flux to 1.7e-13 [Sun Jun 9 08:38:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 08:38:41 2013] xmm0070340701/analysis//spectral/fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete