[Sat Jun  8 20:47:58 2013] Detection parameters:
  Position = (230.8, 365.2) = 13 43 13.00 40 31 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.3 +/- 9.4
  Background counts = 10.8
  Rate = 0.002 +/- 0.0004

[Sat Jun  8 20:47:58 2013] Off-axis axis estimate = 6.89'
[Sat Jun  8 22:47:13 2013] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 22:47:13 2013] Initial guess for spatial extent in simple fitting = 9.87"
[Sat Jun  8 22:47:13 2013] source mask rpix=2.3, npix_max = 30, mask sum = 27, frac = 0.880
[Sat Jun  8 22:47:13 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.87"
[Sat Jun  8 23:48:58 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src25.ximg exists
[Sat Jun  8 23:48:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src25.csv
[Sat Jun  8 23:48:58 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Jun  8 23:48:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src25.csv
[Sat Jun  8 23:48:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 23:48:59 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Jun  8 23:48:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sat Jun  8 23:48:59 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Jun  8 23:48:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sat Jun  8 23:48:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:54:37 2013] Warning, spatial fit 25 centroid is now closest to src. 32
[Sun Jun  9 00:54:37 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:54:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:54:37 2013] Assessing source extent using major
[Sun Jun  9 00:54:37 2013] Source does appear to be extended
[Sun Jun  9 00:54:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 03:27:30 2013] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 03:27:30 2013] Initial guess for spatial extent in simple fitting = 9.87"
[Sun Jun  9 03:27:30 2013] source mask rpix=2.3, npix_max = 30, mask sum = 27, frac = 0.880
[Sun Jun  9 03:27:30 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.87"
[Sun Jun  9 04:41:10 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src25.ximg exists
[Sun Jun  9 04:41:10 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Jun  9 04:41:10 2013] Fit fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src25 appears to have run properly
[Sun Jun  9 04:41:10 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Jun  9 04:41:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun Jun  9 04:41:10 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Jun  9 04:41:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun Jun  9 04:41:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 05:53:21 2013] Spatial fit model total counts = 151.028000, observed total counts = 139.000000
[Sun Jun  9 05:53:21 2013] Offset between fit and detection position for source 30 = 0.171930 pixels
[Sun Jun  9 05:53:21 2013] 149.359900 total counts/ 105.690000 bgd. counts: snr = 4.247812
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.171930 pixels
  Position = (230.6, 365.2) = 13 43 13.06 40 31 27.5
  Extent = 10.2 (6.7-16.3)" x 3.1 (2.5-4.8)", rotation angle = 119 (107-132) degrees
  Source counts = 43.7 +/- 12.2
  Background counts = 105.7
  Rate = 0.001 +/- 0.0003
[Sun Jun  9 05:53:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 05:53:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 05:53:21 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 05:53:21 2013] Source does appear to be extended
[Sun Jun  9 05:53:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.39
[Sun Jun  9 07:26:14 2013] XMMSAS src. selection expression = ellipse(20012.826400, 31721.096400, 609.402018, 184.315205, 118.860000, X, Y)
[Sun Jun  9 07:26:14 2013] Writing source region out to fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src30_src.reg
[Sun Jun  9 07:26:14 2013] Extracting stamp from image fullrun_mos1_xmm0070340701_pi300-10000_cl_sm2.00.img.gz, (196, 330) - (266, 400)
[Sun Jun  9 07:26:14 2013] XMMSAS bgd. selection expression = annulus(20012.826400, 31721.096400, 1015.670029, 2031.340058, X, Y) && !ellipse(21960.197400, 32676.702600, 448.588813, 396.378411, 91.796237, X, Y) && !ellipse(20922.406876, 30917.799652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20930.985540, 29504.693000, 329.123209, 329.123209, 0.000000, X, Y)
[Sun Jun  9 07:26:14 2013] Writing fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src30.gif
[Sun Jun  9 07:33:21 2013] Mean detx,y = (6877.73, -1612.39) 
[Sun Jun  9 07:33:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 07:33:37 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 07:33:37 2013] Setting source spectrum file to fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Jun  9 07:33:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sun Jun  9 08:00:49 2013] Not generating rmf since there are only 43 counts
[Sun Jun  9 08:00:49 2013] rmf not generated due to insufficient counts
[Sun Jun  9 08:38:26 2013] Updating aperture counts using extracted products
[Sun Jun  9 08:38:26 2013] Total counts from fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 49.00
[Sun Jun  9 08:38:26 2013] Total counts from fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src30_bgd.pi.gz = 502.00
[Sun Jun  9 08:38:26 2013] Got source and background scale factors 283744.000000, 7155598.000000
[Sun Jun  9 08:38:26 2013] User source parameters:
  Position = (230.6, 365.2) = 13 43 13.06 40 31 27.5
  Extent = 10.2 (6.7-16.3)" x 3.1 (2.5-4.8)", rotation angle = 119 (107-132) degrees
  Source aperture counts = 29.1 +/- 8.1
  Background aperture counts = 19.9
  Rate = 0.0008 +/- 0.0002

[Sun Jun  9 08:38:29 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 08:38:29 2013] Using photon index=1.80, rate=0.00122, arf fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src30.arf
[Sun Jun  9 08:38:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 08:38:29 2013] Updating source flux to 2.3e-14
[Sun Jun  9 08:38:38 2013] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 08:38:41 2013] xmm0070340701/analysis//spectral/fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete