[Sat Jun  8 20:47:58 2013] Detection parameters:
  Position = (388.1, 412.2) = 13 42 12.93 40 34 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.2 +/- 9.2
  Background counts = 9.6
  Rate = 0.003 +/- 0.0005

[Sat Jun  8 20:47:58 2013] Off-axis axis estimate = 10.50'
[Sat Jun  8 22:47:13 2013] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 22:47:13 2013] Initial guess for spatial extent in simple fitting = 11.68"
[Sat Jun  8 22:47:13 2013] source mask rpix=2.7, npix_max = 40, mask sum = 23, frac = 0.567
[Sat Jun  8 22:47:13 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 11.68"
[Sat Jun  8 23:48:58 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jun  8 23:48:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src20.csv
[Sat Jun  8 23:48:58 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jun  8 23:48:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src20.csv
[Sat Jun  8 23:48:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 23:48:59 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jun  8 23:48:59 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jun  8 23:48:59 2013] Fit fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Jun  9 00:54:37 2013] Spatial fit model total counts = 114.604000, observed total counts = 112.000000
[Sun Jun  9 00:54:37 2013] Offset between fit and detection position for source 25 = 0.974257 pixels
[Sun Jun  9 00:54:37 2013] 110.902800 total counts/ 81.193200 bgd. counts: snr = 3.297137
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.974257 pixels
  Position = (387.2, 412.1) = 13 42 13.30 40 34 51.5
  Extent = 5.1 (3.4-7.8)", rotation angle = 0
  Source counts = 29.7 +/- 10.5
  Background counts = 81.2
  Rate = 0.0008 +/- 0.0003
[Sun Jun  9 00:54:37 2013] Spatial fit model total counts = 175.855000, observed total counts = 155.000000
[Sun Jun  9 00:54:37 2013] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 00:54:37 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:54:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:54:37 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 00:54:37 2013] Source does appear to be extended
[Sun Jun  9 00:54:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 03:27:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 03:27:30 2013] Initial guess for spatial extent in simple fitting = 5.07"
[Sun Jun  9 03:27:30 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.811
[Sun Jun  9 03:27:30 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 5.07"
[Sun Jun  9 04:41:10 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src20.ximg exists
[Sun Jun  9 04:41:10 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Jun  9 04:41:10 2013] Fit fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src20 appears to have run properly
[Sun Jun  9 04:41:10 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Jun  9 04:41:10 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Jun  9 04:41:10 2013] Fit fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Jun  9 05:53:21 2013] Spatial fit model total counts = 127.505000, observed total counts = 124.000000
[Sun Jun  9 05:53:21 2013] Offset between fit and detection position for source 25 = 0.016587 pixels
[Sun Jun  9 05:53:21 2013] 122.344500 total counts/ 94.576000 bgd. counts: snr = 2.855367
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.016587 pixels
  Position = (387.2, 412.1) = 13 42 13.30 40 34 51.6
  Extent = 4.9 (3.3-7.2)", rotation angle = 0
  Source counts = 27.8 +/- 11.1
  Background counts = 94.6
  Rate = 0.0008 +/- 0.0003
[Sun Jun  9 05:53:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 05:53:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 05:53:21 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 05:53:21 2013] Source does appear to be extended
[Sun Jun  9 05:53:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 07:26:14 2013] XMMSAS src. selection expression = ellipse(33634.734120, 35805.245200, 295.285808, 295.285808, 0.000000, X, Y)
[Sun Jun  9 07:26:14 2013] Writing source region out to fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src25_src.reg
[Sun Jun  9 07:26:14 2013] Extracting stamp from image fullrun_mos1_xmm0070340701_pi300-10000_cl_sm2.00.img.gz, (370, 395) - (404, 429)
[Sun Jun  9 07:26:14 2013] XMMSAS bgd. selection expression = annulus(33634.734120, 35805.245200, 492.143014, 984.286028, X, Y) && !ellipse(33887.457886, 37356.556335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32836.852173, 35173.431946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32742.083557, 34182.824585, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 07:26:14 2013] Writing fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src25.gif
[Sun Jun  9 07:31:58 2013] Mean detx,y = (401.55, 11031.32) 
[Sun Jun  9 07:31:59 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 07:32:12 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 07:32:12 2013] Setting source spectrum file to fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Jun  9 07:32:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Jun  9 08:00:06 2013] Not generating rmf since there are only 27 counts
[Sun Jun  9 08:00:06 2013] rmf not generated due to insufficient counts
[Sun Jun  9 08:38:25 2013] Updating aperture counts using extracted products
[Sun Jun  9 08:38:25 2013] Total counts from fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 44.00
[Sun Jun  9 08:38:25 2013] Total counts from fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src25_bgd.pi.gz = 52.00
[Sun Jun  9 08:38:25 2013] Got source and background scale factors 234314.000000, 1217529.000000
[Sun Jun  9 08:38:25 2013] User source parameters:
  Position = (387.2, 412.1) = 13 42 13.30 40 34 51.6
  Extent = 4.9 (3.3-7.2)", rotation angle = 0
  Source aperture counts = 34.0 +/- 7.7
  Background aperture counts = 10.0
  Rate = 0.0009 +/- 0.0002

[Sun Jun  9 08:38:29 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 08:38:29 2013] Using photon index=1.80, rate=0.000774, arf fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src25.arf
[Sun Jun  9 08:38:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 08:38:29 2013] Updating source flux to 2e-14
[Sun Jun  9 08:38:38 2013] Flag p found in src. 25 procflags, skipping spectral fitting
[Sun Jun  9 08:38:38 2013] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 08:38:41 2013] xmm0070340701/analysis//spectral/fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete