[Sat Jun  8 20:47:57 2013] Detection parameters:
  Position = (253.0, 376.0) = 13 43 4.50 40 32 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 959.6 +/- 36.8
  Background counts = 12.8
  Rate = 0.04 +/- 0.001

[Sat Jun  8 20:47:58 2013] Off-axis axis estimate = 6.51'
[Sat Jun  8 22:47:13 2013] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 22:47:13 2013] Initial guess for spatial extent in simple fitting = 9.69"
[Sat Jun  8 22:47:13 2013] source mask rpix=2.2, npix_max = 29, mask sum = 33, frac = 1.110
[Sat Jun  8 22:47:13 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.69"
[Sat Jun  8 23:48:58 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  8 23:48:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src1.csv
[Sat Jun  8 23:48:58 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  8 23:48:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src1.csv
[Sat Jun  8 23:48:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 23:48:59 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  8 23:48:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun  8 23:48:59 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  8 23:48:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun  8 23:48:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070340701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 00:54:37 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.355060 pixels away
[Sun Jun  9 00:54:37 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.887992 pixels away
[Sun Jun  9 00:54:37 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 00:54:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 00:54:37 2013] Assessing source extent using major
[Sun Jun  9 00:54:37 2013] Source does appear to be extended
[Sun Jun  9 00:54:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 03:27:30 2013] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 03:27:30 2013] Initial guess for spatial extent in simple fitting = 9.69"
[Sun Jun  9 03:27:30 2013] source mask rpix=2.2, npix_max = 29, mask sum = 33, frac = 1.110
[Sun Jun  9 03:27:30 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.69"
[Sun Jun  9 04:41:09 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  9 04:41:09 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  9 04:41:09 2013] Fit fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Jun  9 04:41:10 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  9 04:41:10 2013] fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  9 04:41:10 2013] Fit fullrun_mos1_xmm0070340701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  9 05:53:21 2013] Spatial fit model total counts = 980.215000, observed total counts = 944.000000
[Sun Jun  9 05:53:21 2013] Offset between fit and detection position for source 2 = 0.202493 pixels
[Sun Jun  9 05:53:21 2013] 983.049000 total counts/ 272.345000 bgd. counts: snr = 43.065457
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.202493 pixels
  Position = (253.0, 376.2) = 13 43 4.53 40 32 15.4
  Extent = 5.6 (5.2-6.1)" x 5.0 (4.5-5.4)", rotation angle = 92 (239-306) degrees
  Source counts = 710.7 +/- 31.4
  Background counts = 272.3
  Rate = 0.02 +/- 0.0009
[Sun Jun  9 05:53:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 05:53:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 05:53:21 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 05:53:21 2013] Source does appear to be extended
[Sun Jun  9 05:53:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.95
[Sun Jun  9 07:26:14 2013] XMMSAS src. selection expression = ellipse(21960.197400, 32676.702600, 336.441610, 297.283809, 91.796237, X, Y)
[Sun Jun  9 07:26:14 2013] Writing source region out to fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun  9 07:26:14 2013] Extracting stamp from image fullrun_mos1_xmm0070340701_pi300-10000_cl_sm2.00.img.gz, (234, 357) - (272, 395)
[Sun Jun  9 07:26:14 2013] XMMSAS bgd. selection expression = annulus(21960.197400, 32676.702600, 560.736016, 1121.472032, X, Y) && !ellipse(20922.406876, 30917.799652, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 07:26:14 2013] Writing fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src2.gif
[Sun Jun  9 07:26:17 2013] Mean detx,y = (6207.54, 435.93) 
[Sun Jun  9 07:26:18 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 07:26:35 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 07:26:35 2013] Setting source spectrum file to fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun  9 07:26:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun  9 08:38:23 2013] Updating aperture counts using extracted products
[Sun Jun  9 08:38:23 2013] Total counts from fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 729.00
[Sun Jun  9 08:38:23 2013] Total counts from fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src2_bgd.pi.gz = 225.00
[Sun Jun  9 08:38:23 2013] Got source and background scale factors 289360.000000, 2676786.000000
[Sun Jun  9 08:38:23 2013] User source parameters:
  Position = (253.0, 376.2) = 13 43 4.53 40 32 15.4
  Extent = 5.6 (5.2-6.1)" x 5.0 (4.5-5.4)", rotation angle = 92 (239-306) degrees
  Source aperture counts = 704.7 +/- 28.0
  Background aperture counts = 24.3
  Rate = 0.02 +/- 0.0008

[Sun Jun  9 08:38:28 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 08:38:28 2013] Using photon index=1.80, rate=0.0198, arf fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src2.arf
[Sun Jun  9 08:38:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 08:38:28 2013] Updating source flux to 3e-13
[Sun Jun  9 08:38:41 2013] xmm0070340701/analysis//spectral/fullrun_mos1_xmm0070340701_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete