[Wed Aug 15 18:50:26 2012] Detection parameters:
  Position = (390.1, 282.9) = 15 57 54.85 63 51 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 171.1 +/- 23.5
  Background counts = 221.9
  Rate = 0.02 +/- 0.003

[Wed Aug 15 18:50:27 2012] Off-axis axis estimate = 6.74'
[Wed Aug 15 18:53:59 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 18:53:59 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Wed Aug 15 18:53:59 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.188
[Wed Aug 15 18:53:59 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 9.80"
[Thu Aug 16 02:19:18 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src62.ximg exists
[Thu Aug 16 02:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src62.csv
[Thu Aug 16 02:19:18 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src62_1.ximg exists
[Thu Aug 16 02:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src62.csv
[Thu Aug 16 02:19:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 02:19:21 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Thu Aug 16 02:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src62.csv
[Thu Aug 16 02:19:21 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Thu Aug 16 02:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src62.csv
[Thu Aug 16 02:19:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 02:26:31 2012] Warning, spatial fit 62 centroid is now closest to src. 74
[Thu Aug 16 02:26:31 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 02:26:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 02:26:31 2012] Assessing source extent using major
[Thu Aug 16 02:26:31 2012] Source does appear to be extended
[Thu Aug 16 02:26:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 02:26:31 2012] Source is confused with source 65
[Thu Aug 16 02:26:31 2012] Source is confused with source 74
[Thu Aug 16 02:26:45 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 02:26:45 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Thu Aug 16 02:26:45 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.188
[Thu Aug 16 02:26:45 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 9.80"
[Thu Aug 16 09:07:09 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src59.ximg exists
[Thu Aug 16 09:07:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src59.csv
[Thu Aug 16 09:07:09 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src59_1.ximg exists
[Thu Aug 16 09:07:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src59.csv
[Thu Aug 16 09:07:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:07:12 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Thu Aug 16 09:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src59.csv
[Thu Aug 16 09:07:12 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Thu Aug 16 09:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src59.csv
[Thu Aug 16 09:07:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:14:06 2012] Warning, spatial fit 59 centroid is now closest to src. 50
[Thu Aug 16 09:14:06 2012] Spatial fit model total counts = 1527.260000, observed total counts = 1509.000000
[Thu Aug 16 09:14:06 2012] Offset between fit and detection position for source 63 = 2.929421 pixels
[Thu Aug 16 09:14:06 2012] Warning, changing simple spatial fit ID from 59 to 69
[Thu Aug 16 09:14:06 2012] 1438.344000 total counts/ 1210.390000 bgd. counts: snr = 6.552161
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 2.929421 pixels
  Position = (392.9, 282.2) = 15 57 52.99 63 51 16.8
  Extent = 19.6 (19.5-39.2)", rotation angle = 0
  Source counts = 228.0 +/- 37.9
  Background counts = 1210.4
  Rate = 0.1 +/- 0.02
[Thu Aug 16 09:14:07 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 09:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 09:14:07 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 09:14:07 2012] Source does appear to be extended
[Thu Aug 16 09:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 09:14:22 2012] XMMSAS src. selection expression = ellipse(34135.886000, 24505.224000, 1174.872034, 1174.872034, 0.000000, X, Y)
[Thu Aug 16 09:14:22 2012] Writing source region out to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src63_src.reg
[Thu Aug 16 09:14:22 2012] Extracting stamp from image fullrun_pn_xmm0070340601_pi300-10000_cl_sm2.00.img.gz, (325, 215) - (460, 350)
[Thu Aug 16 09:14:22 2012] XMMSAS bgd. selection expression = annulus(34135.886000, 24505.224000, 1958.120056, 3916.240113, X, Y) && !ellipse(30262.732239, 24545.957672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37558.532379, 27221.242188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35824.129181, 26711.861542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38566.721344, 26933.521973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34309.334076, 26235.185547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36531.383850, 25303.668518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36246.493896, 26851.486877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38053.236023, 26668.924408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34952.530853, 26465.873077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35445.370667, 26490.880798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38686.585297, 27392.696014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37240.847504, 26487.750519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33469.752747, 26055.769287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.066376, 25430.008087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32506.412537, 25626.995331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34846.380127, 24884.869507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36076.542816, 26236.276764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36721.215790, 26218.063263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37106.572052, 25487.346100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32964.460846, 25220.353699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30481.363281, 25342.997467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35353.642059, 24919.488434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31623.142700, 25353.166229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31153.093658, 25272.071014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30112.882385, 24925.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35802.318115, 25012.849884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31382.607666, 24852.236542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34445.669830, 24482.340515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31991.528015, 24207.364441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31644.781189, 24054.968414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35094.184631, 24142.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32555.772186, 24070.572021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34491.192963, 23870.112000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33766.300934, 24052.074432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32568.739349, 23506.197754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33351.577393, 23117.724487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34858.572021, 22918.084869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33750.200836, 22477.910217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33575.300781, 21510.802521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35734.248474, 20347.853226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33688.853400, 19633.454000, 1727.832050, 1727.832050, 0.000000, X, Y)
[Thu Aug 16 09:14:22 2012] Writing fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src63.gif
[Thu Aug 16 09:50:38 2012] Mean detx,y = (-4449.81, 9123.49) 
[Thu Aug 16 09:50:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 09:51:22 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 09:51:22 2012] Setting source spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Thu Aug 16 09:51:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Thu Aug 16 11:11:38 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:11:38 2012] Error reading totcts from fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Thu Aug 16 11:11:43 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:11:43 2012] Using photon index=1.80, rate=0.149, arf fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src63.arf
[Thu Aug 16 11:11:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:11:43 2012] Updating source flux to 6.5e-13
[Thu Aug 16 11:11:50 2012] Flag c found in src. 63 procflags, skipping spectral fitting