[Wed Aug 15 18:50:26 2012] Detection parameters:
  Position = (319.8, 285.5) = 15 58 41.07 63 51 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.7 +/- 22.0
  Background counts = 231.3
  Rate = 0.03 +/- 0.003

[Wed Aug 15 18:50:27 2012] Off-axis axis estimate = 1.82'
[Wed Aug 15 18:53:59 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 18:53:59 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Wed Aug 15 18:53:59 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.046
[Wed Aug 15 18:53:59 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 7.34"
[Thu Aug 16 02:19:18 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src60.ximg exists
[Thu Aug 16 02:19:18 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src60_1.ximg exists
[Thu Aug 16 02:19:18 2012] Fit fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src60 appears to have run properly
[Thu Aug 16 02:19:21 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Thu Aug 16 02:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src60.csv
[Thu Aug 16 02:19:21 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Thu Aug 16 02:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src60.csv
[Thu Aug 16 02:19:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 02:26:31 2012] Source 61 is offset by -6.172696 and -7.518161 pixels which is larger than
2 X fitted extent = 0.872248 x 0.872248, not incorporating fit results
[Thu Aug 16 02:26:31 2012] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 11.102034 pixels away
[Thu Aug 16 02:26:31 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 02:26:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 02:26:31 2012] Assessing source extent using major
[Thu Aug 16 02:26:31 2012] Source does appear to be extended
[Thu Aug 16 02:26:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 02:26:31 2012] Source is confused with source 71
[Thu Aug 16 02:26:45 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 02:26:45 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Thu Aug 16 02:26:45 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.046
[Thu Aug 16 02:26:45 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 7.34"
[Thu Aug 16 09:07:09 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src57.ximg exists
[Thu Aug 16 09:07:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src57.csv
[Thu Aug 16 09:07:09 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src57_1.ximg exists
[Thu Aug 16 09:07:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src57.csv
[Thu Aug 16 09:07:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:07:12 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Thu Aug 16 09:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src57.csv
[Thu Aug 16 09:07:12 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Thu Aug 16 09:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src57.csv
[Thu Aug 16 09:07:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:14:06 2012] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 10.391271 pixels away
[Thu Aug 16 09:14:07 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 09:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 09:14:07 2012] Assessing source extent using major
[Thu Aug 16 09:14:07 2012] Source does appear to be extended
[Thu Aug 16 09:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 09:14:22 2012] XMMSAS src. selection expression = ellipse(27778.389465, 24786.505981, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 09:14:22 2012] Writing source region out to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src61_src.reg
[Thu Aug 16 09:14:22 2012] Extracting stamp from image fullrun_pn_xmm0070340601_pi300-10000_cl_sm2.00.img.gz, (282, 248) - (357, 323)
[Thu Aug 16 09:14:22 2012] XMMSAS bgd. selection expression = annulus(27778.389465, 24786.505981, 1087.500000, 2175.000000, X, Y) && !ellipse(30262.732239, 24545.957672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24915.492615, 23785.772339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25197.074402, 22393.679413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30481.363281, 25342.997467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29290.497681, 24999.657043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30112.882385, 24925.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28942.609192, 24750.471924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27009.389435, 24323.575073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27725.251709, 24233.487274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25762.614227, 24034.391937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25067.575348, 23328.209900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27252.574188, 22998.641113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25759.993713, 22681.654510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26650.333893, 22890.886749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.444580, 22735.033875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26725.179169, 22309.578705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26234.672600, 22362.218000, 1285.496037, 1285.496037, 0.000000, X, Y)
[Thu Aug 16 09:14:22 2012] Writing fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src61.gif
[Thu Aug 16 09:50:12 2012] Mean detx,y = (-2731.73, 3011.68) 
[Thu Aug 16 09:50:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 09:50:32 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 09:50:32 2012] Setting source spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Thu Aug 16 09:50:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Thu Aug 16 10:46:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 10:46:52 2012] rmf not generated due to insufficient counts
[Thu Aug 16 11:11:38 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:11:38 2012] Error reading totcts from fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Thu Aug 16 11:11:43 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:11:43 2012] Using photon index=1.80, rate=0.0265, arf fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src61.arf
[Thu Aug 16 11:11:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:11:43 2012] Updating source flux to 9.3e-14
[Thu Aug 16 11:11:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting