[Wed Aug 15 18:50:26 2012] Detection parameters:
  Position = (364.0, 292.0) = 15 58 11.97 63 51 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.2 +/- 26.8
  Background counts = 211.4
  Rate = 0.03 +/- 0.004

[Wed Aug 15 18:50:27 2012] Off-axis axis estimate = 4.78'
[Wed Aug 15 18:53:59 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 18:53:59 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Wed Aug 15 18:53:59 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.174
[Wed Aug 15 18:53:59 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 8.82"
[Thu Aug 16 02:19:18 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src54.ximg exists
[Thu Aug 16 02:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src54.csv
[Thu Aug 16 02:19:18 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src54_1.ximg exists
[Thu Aug 16 02:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src54.csv
[Thu Aug 16 02:19:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 02:19:21 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Thu Aug 16 02:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src54.csv
[Thu Aug 16 02:19:21 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Thu Aug 16 02:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src54.csv
[Thu Aug 16 02:19:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 02:26:31 2012] Warning, spatial fit 54 centroid is now closest to src. 59
[Thu Aug 16 02:26:31 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 02:26:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 02:26:31 2012] Assessing source extent using major
[Thu Aug 16 02:26:31 2012] Source does appear to be extended
[Thu Aug 16 02:26:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 02:26:31 2012] Source is confused with source 56
[Thu Aug 16 02:26:31 2012] Source is confused with source 59
[Thu Aug 16 02:26:45 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 02:26:45 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Thu Aug 16 02:26:45 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.174
[Thu Aug 16 02:26:45 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 8.82"
[Thu Aug 16 09:07:09 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src51.ximg exists
[Thu Aug 16 09:07:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src51.csv
[Thu Aug 16 09:07:09 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src51_1.ximg exists
[Thu Aug 16 09:07:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src51.csv
[Thu Aug 16 09:07:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:07:12 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Thu Aug 16 09:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src51.csv
[Thu Aug 16 09:07:12 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Thu Aug 16 09:07:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src51.csv
[Thu Aug 16 09:07:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:14:06 2012] Warning, spatial fit 51 centroid is now closest to src. 33
[Thu Aug 16 09:14:06 2012] Source 55 is offset by -1.891279 and -7.959974 pixels which is larger than
2 X fitted extent = 0.991646 x 0.991646, not incorporating fit results
[Thu Aug 16 09:14:06 2012] Spatial fit model total counts = -216.685000, observed total counts = 1336.000000
[Thu Aug 16 09:14:06 2012] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 16 09:14:07 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 09:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 09:14:07 2012] Assessing source extent using major
[Thu Aug 16 09:14:07 2012] Source does appear to be extended
[Thu Aug 16 09:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 09:14:21 2012] XMMSAS src. selection expression = ellipse(31623.142700, 25353.166229, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 09:14:21 2012] Writing source region out to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src55_src.reg
[Thu Aug 16 09:14:21 2012] Extracting stamp from image fullrun_pn_xmm0070340601_pi300-10000_cl_sm2.00.img.gz, (327, 254) - (402, 329)
[Thu Aug 16 09:14:21 2012] XMMSAS bgd. selection expression = annulus(31623.142700, 25353.166229, 1087.500000, 2175.000000, X, Y) && !ellipse(30262.732239, 24545.957672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34309.334076, 26235.185547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33469.752747, 26055.769287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.066376, 25430.008087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32506.412537, 25626.995331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32964.460846, 25220.353699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30481.363281, 25342.997467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29290.497681, 24999.657043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31153.093658, 25272.071014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30112.882385, 24925.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31382.607666, 24852.236542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28942.609192, 24750.471924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34135.886000, 24505.224000, 1566.496045, 1566.496045, 0.000000, X, Y) && !ellipse(34445.669830, 24482.340515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31991.528015, 24207.364441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31644.781189, 24054.968414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32555.772186, 24070.572021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34491.192963, 23870.112000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33766.300934, 24052.074432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32568.739349, 23506.197754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33351.577393, 23117.724487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33750.200836, 22477.910217, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 16 09:14:21 2012] Writing fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src55.gif
[Thu Aug 16 09:48:05 2012] Mean detx,y = (-2960.73, 6876.54) 
[Thu Aug 16 09:48:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 09:48:23 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 09:48:23 2012] Setting source spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Thu Aug 16 09:48:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Thu Aug 16 10:45:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 10:45:15 2012] rmf not generated due to insufficient counts
[Thu Aug 16 11:11:38 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:11:38 2012] Error reading totcts from fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Thu Aug 16 11:11:43 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:11:43 2012] Using photon index=1.80, rate=0.0261, arf fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src55.arf
[Thu Aug 16 11:11:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:11:43 2012] Updating source flux to 9.9e-14
[Thu Aug 16 11:11:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting