[Wed Aug 15 18:50:26 2012] Detection parameters:
  Position = (298.4, 193.9) = 15 58 55.19 63 44 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.0 +/- 26.0
  Background counts = 231.6
  Rate = 0.02 +/- 0.003

[Wed Aug 15 18:50:27 2012] Off-axis axis estimate = 7.58'
[Wed Aug 15 18:53:59 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 18:53:59 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Wed Aug 15 18:53:59 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.924
[Wed Aug 15 18:53:59 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 10.22"
[Thu Aug 16 02:19:18 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src40.ximg exists
[Thu Aug 16 02:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src40.csv
[Thu Aug 16 02:19:18 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu Aug 16 02:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src40.csv
[Thu Aug 16 02:19:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 02:19:21 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu Aug 16 02:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu Aug 16 02:19:21 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu Aug 16 02:19:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu Aug 16 02:19:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 02:26:31 2012] Warning, spatial fit 40 centroid is now closest to src. 100
[Thu Aug 16 02:26:31 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 02:26:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 02:26:31 2012] Assessing source extent using major
[Thu Aug 16 02:26:31 2012] Source does appear to be extended
[Thu Aug 16 02:26:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 02:26:31 2012] Source is confused with source 103
[Thu Aug 16 02:26:45 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 02:26:45 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Thu Aug 16 02:26:45 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.924
[Thu Aug 16 02:26:45 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 10.22"
[Thu Aug 16 09:07:09 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src37.ximg exists
[Thu Aug 16 09:07:09 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src37.csv
[Thu Aug 16 09:07:09 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu Aug 16 09:07:09 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src37.csv
[Thu Aug 16 09:07:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:07:11 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu Aug 16 09:07:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu Aug 16 09:07:11 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu Aug 16 09:07:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu Aug 16 09:07:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:14:06 2012] Warning, spatial fit 37 centroid is now closest to src. 100
[Thu Aug 16 09:14:07 2012] Spatial fit model total counts = 5512.420000, observed total counts = 5198.000000
[Thu Aug 16 09:14:07 2012] Offset between fit and detection position for source 41 = 4.327702 pixels
[Thu Aug 16 09:14:07 2012] Warning, changing simple spatial fit ID from 37 to 97
[Thu Aug 16 09:14:07 2012] 5515.793000 total counts/ 4587.740000 bgd. counts: snr = 13.701666
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 4.327702 pixels
  Position = (301.0, 190.4) = 15 58 53.49 63 44 38.3
  Extent = 33.1 (33.1-66.3)", rotation angle = 0
  Source counts = 928.1 +/- 74.3
  Background counts = 4587.7
  Rate = 0.6 +/- 0.05
[Thu Aug 16 09:14:07 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 09:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 09:14:07 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 09:14:07 2012] Source does appear to be extended
[Thu Aug 16 09:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 09:14:21 2012] XMMSAS src. selection expression = ellipse(26138.926000, 16520.434000, 1988.406057, 1988.406057, 0.000000, X, Y)
[Thu Aug 16 09:14:21 2012] Writing source region out to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src41_src.reg
[Thu Aug 16 09:14:21 2012] Extracting stamp from image fullrun_pn_xmm0070340601_pi300-10000_cl_sm2.00.img.gz, (187, 76) - (415, 305)
[Thu Aug 16 09:14:21 2012] XMMSAS bgd. selection expression = annulus(26138.926000, 16520.434000, 3314.010095, 6628.020191, X, Y) && !ellipse(26484.431732, 14177.699219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26791.167267, 13494.511063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27297.932000, 12475.850000, 3935.456113, 3935.456113, 0.000000, X, Y) && !ellipse(27182.979200, 12156.547600, 3832.256110, 1080.312031, 71.709000, X, Y) && !ellipse(19707.680527, 16058.597641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.843567, 14828.105728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28008.044189, 13791.606186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27593.440125, 12736.301071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28251.978000, 11391.272000, 1967.728057, 1967.728057, 0.000000, X, Y) && !ellipse(24915.492615, 23785.772339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24263.372284, 23784.803253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24392.196960, 22336.429016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25197.074402, 22393.679413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26193.039612, 15619.449158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27086.849915, 15436.789780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27430.697449, 14744.470978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34135.886000, 24505.224000, 1566.496045, 1566.496045, 0.000000, X, Y) && !ellipse(32568.739349, 23506.197754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33351.577393, 23117.724487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25067.575348, 23328.209900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27252.574188, 22998.641113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25759.993713, 22681.654510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26650.333893, 22890.886749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.444580, 22735.033875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26725.179169, 22309.578705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26234.672600, 22362.218000, 1285.496037, 1285.496037, 0.000000, X, Y) && !ellipse(33575.300781, 21510.802521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25921.167267, 21189.305023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24854.705719, 21185.964996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25244.848999, 20394.950790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25492.303040, 19614.896545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33688.853400, 19633.454000, 1727.832050, 1727.832050, 0.000000, X, Y) && !ellipse(26166.991119, 18034.154495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26494.327026, 17600.297485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25941.672058, 17528.460358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26858.988000, 15905.966000, 1234.696036, 1234.696036, 0.000000, X, Y) && !ellipse(28145.107422, 14937.089371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26801.070526, 14739.949463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27149.407715, 14270.165924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20465.656876, 12782.096344, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 16 09:14:21 2012] Writing fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src41.gif
[Thu Aug 16 09:42:16 2012] Mean detx,y = (-10215.83, -169.18) 
[Thu Aug 16 09:42:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 09:43:10 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 09:43:10 2012] Setting source spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Aug 16 09:43:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Thu Aug 16 11:11:37 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:11:37 2012] Error reading totcts from fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Aug 16 11:11:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:11:42 2012] Using photon index=1.80, rate=0.607, arf fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src41.arf
[Thu Aug 16 11:11:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:11:43 2012] Updating source flux to 2.5e-12
[Thu Aug 16 11:11:50 2012] Flag c found in src. 41 procflags, skipping spectral fitting