[Wed Aug 15 18:50:25 2012] Detection parameters:
  Position = (428.6, 305.0) = 15 57 29.42 63 52 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.5 +/- 25.0
  Background counts = 186.8
  Rate = 0.02 +/- 0.003

[Wed Aug 15 18:50:27 2012] Off-axis axis estimate = 9.45'
[Wed Aug 15 18:53:59 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 18:53:59 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Wed Aug 15 18:53:59 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Wed Aug 15 18:53:59 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 11.15"
[Thu Aug 16 02:19:18 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src30.ximg exists
[Thu Aug 16 02:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src30.csv
[Thu Aug 16 02:19:18 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Aug 16 02:19:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src30.csv
[Thu Aug 16 02:19:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 02:19:20 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Aug 16 02:19:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Aug 16 02:19:20 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Aug 16 02:19:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Aug 16 02:19:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 02:26:31 2012] Warning, spatial fit 30 centroid is now closest to src. 48
[Thu Aug 16 02:26:31 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 02:26:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 02:26:31 2012] Assessing source extent using major
[Thu Aug 16 02:26:31 2012] Source does appear to be extended
[Thu Aug 16 02:26:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 02:26:31 2012] Source is confused with source 47
[Thu Aug 16 02:26:45 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 02:26:45 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Thu Aug 16 02:26:45 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Thu Aug 16 02:26:45 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 11.15"
[Thu Aug 16 09:07:08 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src28.ximg exists
[Thu Aug 16 09:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src28.csv
[Thu Aug 16 09:07:08 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu Aug 16 09:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src28.csv
[Thu Aug 16 09:07:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:07:11 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu Aug 16 09:07:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src28.csv
[Thu Aug 16 09:07:11 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Aug 16 09:07:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src28.csv
[Thu Aug 16 09:07:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:14:06 2012] Source 30 is offset by -1.836259 and 4.161638 pixels which is larger than
2 X fitted extent = 1.321343 x 1.321343, not incorporating fit results
[Thu Aug 16 09:14:06 2012] Warning, spatial fit 28 centroid is now closest to src. 12
[Thu Aug 16 09:14:07 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 09:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 09:14:07 2012] Assessing source extent using major
[Thu Aug 16 09:14:07 2012] Source does appear to be extended
[Thu Aug 16 09:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 09:14:20 2012] XMMSAS src. selection expression = ellipse(37240.847504, 26487.750519, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 09:14:20 2012] Writing source region out to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src30_src.reg
[Thu Aug 16 09:14:20 2012] Extracting stamp from image fullrun_pn_xmm0070340601_pi300-10000_cl_sm2.00.img.gz, (391, 268) - (466, 343)
[Thu Aug 16 09:14:20 2012] XMMSAS bgd. selection expression = annulus(37240.847504, 26487.750519, 1087.500000, 2175.000000, X, Y) && !ellipse(37558.532379, 27221.242188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35824.129181, 26711.861542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38566.721344, 26933.521973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34309.334076, 26235.185547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36531.383850, 25303.668518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36246.493896, 26851.486877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38053.236023, 26668.924408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34952.530853, 26465.873077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35445.370667, 26490.880798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38686.585297, 27392.696014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34846.380127, 24884.869507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36076.542816, 26236.276764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36721.215790, 26218.063263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37106.572052, 25487.346100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35353.642059, 24919.488434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35802.318115, 25012.849884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34135.886000, 24505.224000, 1566.496045, 1566.496045, 0.000000, X, Y) && !ellipse(34445.669830, 24482.340515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35094.184631, 24142.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34491.192963, 23870.112000, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 16 09:14:20 2012] Writing fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src30.gif
[Thu Aug 16 09:38:08 2012] Mean detx,y = (-3136.73, 12629.64) 
[Thu Aug 16 09:38:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 09:38:25 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 09:38:25 2012] Setting source spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Aug 16 09:38:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Thu Aug 16 10:35:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 10:35:37 2012] rmf not generated due to insufficient counts
[Thu Aug 16 11:11:36 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:11:37 2012] Error reading totcts from fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Aug 16 11:11:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:11:42 2012] Using photon index=1.80, rate=0.0209, arf fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src30.arf
[Thu Aug 16 11:11:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:11:42 2012] Updating source flux to 1.2e-13
[Thu Aug 16 11:11:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting