[Wed Aug 15 18:50:25 2012] Detection parameters:
  Position = (387.2, 124.0) = 15 57 57.12 63 39 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.4 +/- 28.5
  Background counts = 198.8
  Rate = 0.02 +/- 0.004

[Wed Aug 15 18:50:27 2012] Off-axis axis estimate = 14.19'
[Wed Aug 15 18:53:59 2012] Using EEF radius (= 13.52 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 18:53:59 2012] Initial guess for spatial extent in simple fitting = 13.52"
[Wed Aug 15 18:53:59 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.075
[Wed Aug 15 18:53:59 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.52"
[Thu Aug 16 02:19:17 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src3.ximg exists
[Thu Aug 16 02:19:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src3.csv
[Thu Aug 16 02:19:17 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Aug 16 02:19:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src3.csv
[Thu Aug 16 02:19:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 02:19:19 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Aug 16 02:19:19 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Aug 16 02:19:19 2012] Fit fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Aug 16 02:26:30 2012] Warning, spatial fit 3 centroid is now closest to src. 28
[Thu Aug 16 02:26:31 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 02:26:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 02:26:31 2012] Assessing source extent using major
[Thu Aug 16 02:26:31 2012] Source does appear to be extended
[Thu Aug 16 02:26:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 02:26:31 2012] Source is confused with source 6
[Thu Aug 16 02:26:45 2012] Using EEF radius (= 13.52 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 02:26:45 2012] Initial guess for spatial extent in simple fitting = 13.52"
[Thu Aug 16 02:26:45 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.075
[Thu Aug 16 02:26:45 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.52"
[Thu Aug 16 09:07:08 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src3.ximg exists
[Thu Aug 16 09:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src3.csv
[Thu Aug 16 09:07:08 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Aug 16 09:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src3.csv
[Thu Aug 16 09:07:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:07:10 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Aug 16 09:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Aug 16 09:07:10 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Aug 16 09:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Aug 16 09:07:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:14:06 2012] Source 3 is offset by 0.923024 and -5.642397 pixels which is larger than
2 X fitted extent = 1.584924 x 1.584924, not incorporating fit results
[Thu Aug 16 09:14:06 2012] Warning, spatial fit 3 centroid is now closest to src. 28
[Thu Aug 16 09:14:06 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.743731 pixels away
[Thu Aug 16 09:14:07 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 09:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 09:14:07 2012] Assessing source extent using major
[Thu Aug 16 09:14:07 2012] Source does appear to be extended
[Thu Aug 16 09:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 09:14:19 2012] XMMSAS src. selection expression = ellipse(33641.695099, 10738.709465, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 09:14:19 2012] Writing source region out to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src3_src.reg
[Thu Aug 16 09:14:19 2012] Extracting stamp from image fullrun_pn_xmm0070340601_pi300-10000_cl_sm2.00.img.gz, (350, 86) - (425, 161)
[Thu Aug 16 09:14:19 2012] XMMSAS bgd. selection expression = annulus(33641.695099, 10738.709465, 1087.500000, 2175.000000, X, Y) && !ellipse(34706.762756, 10593.831154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35664.997345, 11033.645386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34149.028717, 10430.949089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35055.129150, 11160.292938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34345.806213, 11305.002655, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 16 09:14:19 2012] Writing fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src3.gif
[Thu Aug 16 09:15:12 2012] Mean detx,y = (-17619.85, 5432.62) 
[Thu Aug 16 09:15:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 09:15:23 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 09:15:23 2012] Setting source spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Aug 16 09:15:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Aug 16 10:14:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 10:14:01 2012] rmf not generated due to insufficient counts
[Thu Aug 16 11:11:35 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:11:35 2012] Error reading totcts from fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Aug 16 11:11:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:11:41 2012] Using photon index=1.80, rate=0.0231, arf fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src3.arf
[Thu Aug 16 11:11:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:11:41 2012] Updating source flux to 2.1e-13
[Thu Aug 16 11:11:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 16 11:17:04 2012] xmm0070340601/analysis//spectral/fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete