[Wed Aug 15 18:50:25 2012] Detection parameters:
  Position = (438.0, 307.1) = 15 57 23.25 63 53 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.9 +/- 25.6
  Background counts = 182.1
  Rate = 0.02 +/- 0.003

[Wed Aug 15 18:50:27 2012] Off-axis axis estimate = 10.13'
[Wed Aug 15 18:53:59 2012] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 18:53:59 2012] Initial guess for spatial extent in simple fitting = 11.50"
[Wed Aug 15 18:53:59 2012] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.886
[Wed Aug 15 18:53:59 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 11.50"
[Thu Aug 16 02:19:17 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src19.ximg exists
[Thu Aug 16 02:19:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src19.csv
[Thu Aug 16 02:19:17 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Aug 16 02:19:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src19.csv
[Thu Aug 16 02:19:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 02:19:20 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Aug 16 02:19:20 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Aug 16 02:19:20 2012] Fit fullrun_pn_xmm0070340601_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Aug 16 02:26:30 2012] Spatial fit model total counts = 1215.190000, observed total counts = 993.000000
[Thu Aug 16 02:26:30 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 16 02:26:31 2012] Warning, spatial fit 19 centroid is now closest to src. 9
[Thu Aug 16 02:26:31 2012] Source 19 is offset by 2.805058 and 1.933913 pixels which is larger than
2 X fitted extent = 1.407614 x 1.407614, not incorporating fit results
[Thu Aug 16 02:26:31 2012] Source 19 is offset by 0.748759 and 2.894602 pixels which is larger than
2 X fitted extent = 1.275278 x 1.275278, not incorporating fit results
[Thu Aug 16 02:26:31 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 02:26:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 02:26:31 2012] Assessing source extent using major
[Thu Aug 16 02:26:31 2012] Source does appear to be extended
[Thu Aug 16 02:26:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 02:26:31 2012] Source is confused with source 9
[Thu Aug 16 02:26:45 2012] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 02:26:45 2012] Initial guess for spatial extent in simple fitting = 11.50"
[Thu Aug 16 02:26:45 2012] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.886
[Thu Aug 16 02:26:45 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 11.50"
[Thu Aug 16 09:07:08 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src17.ximg exists
[Thu Aug 16 09:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src17.csv
[Thu Aug 16 09:07:08 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Aug 16 09:07:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src17.csv
[Thu Aug 16 09:07:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:07:11 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Aug 16 09:07:11 2012] fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Aug 16 09:07:11 2012] Fit fullrun_pn_xmm0070340601_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Aug 16 09:14:06 2012] Spatial fit model total counts = 1219.990000, observed total counts = 993.000000
[Thu Aug 16 09:14:06 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 16 09:14:06 2012] Warning, spatial fit 17 centroid is now closest to src. 30
[Thu Aug 16 09:14:07 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 09:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 09:14:07 2012] Assessing source extent using major
[Thu Aug 16 09:14:07 2012] Source does appear to be extended
[Thu Aug 16 09:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 09:14:20 2012] XMMSAS src. selection expression = ellipse(38053.236023, 26668.924408, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 09:14:20 2012] Writing source region out to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src19_src.reg
[Thu Aug 16 09:14:20 2012] Extracting stamp from image fullrun_pn_xmm0070340601_pi300-10000_cl_sm2.00.img.gz, (400, 270) - (475, 345)
[Thu Aug 16 09:14:20 2012] XMMSAS bgd. selection expression = annulus(38053.236023, 26668.924408, 1087.500000, 2175.000000, X, Y) && !ellipse(37558.532379, 27221.242188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35824.129181, 26711.861542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38566.721344, 26933.521973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36531.383850, 25303.668518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36246.493896, 26851.486877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35445.370667, 26490.880798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38686.585297, 27392.696014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37240.847504, 26487.750519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36076.542816, 26236.276764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36721.215790, 26218.063263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37106.572052, 25487.346100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35353.642059, 24919.488434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35802.318115, 25012.849884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35094.184631, 24142.860504, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 16 09:14:20 2012] Writing fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src19.gif
[Thu Aug 16 09:33:03 2012] Mean detx,y = (-3139.13, 13442.93) 
[Thu Aug 16 09:33:05 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 09:33:24 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 09:33:24 2012] Setting source spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Aug 16 09:33:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Aug 16 10:29:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 10:29:29 2012] rmf not generated due to insufficient counts
[Thu Aug 16 11:11:36 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:11:36 2012] Error reading totcts from fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Aug 16 11:11:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:11:42 2012] Using photon index=1.80, rate=0.0237, arf fullrun_pn_xmm0070340601_pi300-10000_pass1_cl_src19.arf
[Thu Aug 16 11:11:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:11:42 2012] Updating source flux to 1.5e-13
[Thu Aug 16 11:11:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting