[Thu Sep  6 10:47:24 2012] Detection parameters:
  Position = (256.1, 330.2) = 12 27 31.62 33 32 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.2 +/- 16.8
  Background counts = 78.0
  Rate = 0.003 +/- 0.0007

[Thu Sep  6 10:47:24 2012] Off-axis axis estimate = 3.83'
[Thu Sep  6 11:16:53 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 11:16:53 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Thu Sep  6 11:16:53 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.069
[Thu Sep  6 11:16:53 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.35"
[Thu Sep  6 11:34:45 2012] fullrun_mos1_xmm0070340501_pi300-10000_cl_pass0_src9.ximg exists
[Thu Sep  6 11:34:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340501_pi300-10000_cl_pass0_src9.csv
[Thu Sep  6 11:34:45 2012] fullrun_mos1_xmm0070340501_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Sep  6 11:34:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340501_pi300-10000_cl_pass0_src9.csv
[Thu Sep  6 11:34:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070340501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070340501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 11:34:46 2012] fullrun_mos1_xmm0070340501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Sep  6 11:34:46 2012] fullrun_mos1_xmm0070340501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Sep  6 11:34:46 2012] Fit fullrun_mos1_xmm0070340501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Sep  6 11:48:32 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.395444 pixels away
[Thu Sep  6 11:48:32 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 11:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 11:48:32 2012] Assessing source extent using major
[Thu Sep  6 11:48:32 2012] Source does appear to be extended
[Thu Sep  6 11:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 12:08:00 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 12:08:00 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Thu Sep  6 12:08:00 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.069
[Thu Sep  6 12:08:00 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.35"
[Thu Sep  6 12:23:55 2012] fullrun_mos1_xmm0070340501_pi300-10000_cl_pass1_src9.ximg exists
[Thu Sep  6 12:23:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340501_pi300-10000_cl_pass1_src9.csv
[Thu Sep  6 12:23:55 2012] fullrun_mos1_xmm0070340501_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Sep  6 12:23:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070340501_pi300-10000_cl_pass1_src9.csv
[Thu Sep  6 12:23:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070340501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070340501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 12:23:55 2012] fullrun_mos1_xmm0070340501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Sep  6 12:23:55 2012] fullrun_mos1_xmm0070340501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Sep  6 12:23:55 2012] Fit fullrun_mos1_xmm0070340501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Sep  6 12:37:06 2012] Spatial fit model total counts = 243.347000, observed total counts = 242.000000
[Thu Sep  6 12:37:06 2012] Offset between fit and detection position for source 10 = 0.386286 pixels
[Thu Sep  6 12:37:06 2012] 243.393900 total counts/ 200.074000 bgd. counts: snr = 3.062613
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.386286 pixels
  Position = (256.4, 329.9) = 12 27 31.51 33 32 57.9
  Extent = 6.2 (3.7-9.0)", rotation angle = 0
  Source counts = 43.3 +/- 15.6
  Background counts = 200.1
  Rate = 0.002 +/- 0.0007
[Thu Sep  6 12:37:06 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 12:37:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 12:37:06 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 12:37:06 2012] Source does appear to be extended
[Thu Sep  6 12:37:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 12:45:39 2012] XMMSAS src. selection expression = ellipse(22261.851000, 28656.068200, 369.969011, 369.969011, 0.000000, X, Y)
[Thu Sep  6 12:45:39 2012] Writing source region out to fullrun_mos1_xmm0070340501_pi300-10000_pass1_cl_src10_src.reg
[Thu Sep  6 12:45:39 2012] Extracting stamp from image fullrun_mos1_xmm0070340501_pi300-10000_cl_sm2.00.img.gz, (235, 309) - (278, 351)
[Thu Sep  6 12:45:39 2012] XMMSAS bgd. selection expression = annulus(22261.851000, 28656.068200, 616.615018, 1233.230035, X, Y)
[Thu Sep  6 12:45:39 2012] Writing fullrun_mos1_xmm0070340501_pi300-10000_pass1_cl_src10.gif
[Thu Sep  6 12:47:37 2012] Mean detx,y = (2731.42, -3322.86) 
[Thu Sep  6 12:47:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 12:47:47 2012] grppha failed
[Thu Sep  6 12:47:47 2012] Setting source spectrum file to fullrun_mos1_xmm0070340501_pi300-10000_pass1_cl_src10_src.pi.gz
[Thu Sep  6 12:47:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0070340501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Sep  6 12:49:45 2012] Not generating rmf since there are only 43 counts
[Thu Sep  6 12:49:45 2012] rmf not generated due to insufficient counts
[Thu Sep  6 12:55:09 2012] Updating aperture counts using extracted products
[Thu Sep  6 12:55:09 2012] Error reading totcts from fullrun_mos1_xmm0070340501_pi300-10000_pass1_cl_src10_src.pi.gz
[Thu Sep  6 12:55:09 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 12:55:10 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep  6 12:55:11 2012] xmm0070340501/analysis//spectral/fullrun_mos1_xmm0070340501_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete