[Wed Jul 25 22:20:53 2012] Detection parameters:
  Position = (242.9, 254.3) = 13 51 18.10 60 2 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.6 +/- 17.6
  Background counts = 68.3
  Rate = 0.01 +/- 0.001

[Wed Jul 25 22:20:56 2012] Off-axis axis estimate = 5.14'
[Wed Jul 25 22:23:00 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:23:00 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Wed Jul 25 22:23:00 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.137
[Wed Jul 25 22:23:00 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.00"
[Thu Jul 26 02:53:10 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jul 26 02:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src6.csv
[Thu Jul 26 02:53:10 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jul 26 02:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src6.csv
[Thu Jul 26 02:53:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jul 26 02:53:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:58:55 2012] Warning, spatial fit 6 centroid is now closest to src. 5
[Thu Jul 26 02:58:56 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 02:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 02:58:56 2012] Assessing source extent using major
[Thu Jul 26 02:58:56 2012] Source does appear to be extended
[Thu Jul 26 02:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 02:58:56 2012] Source is confused with source 60
[Thu Jul 26 02:59:07 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 02:59:07 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Thu Jul 26 02:59:07 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.137
[Thu Jul 26 02:59:07 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.00"
[Thu Jul 26 07:54:32 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jul 26 07:54:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src6.csv
[Thu Jul 26 07:54:32 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jul 26 07:54:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src6.csv
[Thu Jul 26 07:54:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jul 26 07:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jul 26 07:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jul 26 07:54:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 08:00:28 2012] Warning, spatial fit 6 centroid is now closest to src. 5
[Thu Jul 26 08:00:28 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 08:00:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 08:00:28 2012] Assessing source extent using major
[Thu Jul 26 08:00:28 2012] Source does appear to be extended
[Thu Jul 26 08:00:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 08:00:39 2012] XMMSAS src. selection expression = ellipse(21087.840424, 22072.317322, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 08:00:39 2012] Writing source region out to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src8_src.reg
[Thu Jul 26 08:00:39 2012] Extracting stamp from image fullrun_pn_xmm0070340401_pi300-10000_cl_sm2.00.img.gz, (205, 217) - (280, 292)
[Thu Jul 26 08:00:39 2012] XMMSAS bgd. selection expression = annulus(21087.840424, 22072.317322, 1087.500000, 2175.000000, X, Y) && !ellipse(21674.170456, 23617.162048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21442.213821, 22651.323456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22234.390930, 23000.194305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19839.056686, 21347.608490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18937.880005, 20056.056213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19525.056992, 19541.705353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18325.188187, 19247.889191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23437.108582, 24857.177551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22519.562317, 24401.096619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23065.773529, 24199.548035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22062.541504, 24050.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22230.275635, 23615.871704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23851.030304, 23620.332153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23596.550000, 23061.972000, 1275.480037, 1275.480037, 0.000000, X, Y) && !ellipse(21141.498566, 23255.345276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21615.821000, 22341.428000, 1397.744040, 1397.744040, 0.000000, X, Y) && !ellipse(23676.039978, 22125.064789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22106.040176, 21372.184769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19734.045600, 20626.439800, 1579.280045, 1579.280045, 0.000000, X, Y) && !ellipse(19285.826000, 20373.296000, 1636.008047, 1636.008047, 0.000000, X, Y)
[Thu Jul 26 08:00:39 2012] Writing fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src8.gif
[Thu Jul 26 08:03:22 2012] Mean detx,y = (-6916.48, -71.79) 
[Thu Jul 26 08:03:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 08:03:45 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 08:03:45 2012] Setting source spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jul 26 08:03:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Jul 26 08:31:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 08:31:28 2012] rmf not generated due to insufficient counts
[Thu Jul 26 08:48:35 2012] Updating aperture counts using extracted products
[Thu Jul 26 08:48:35 2012] Error reading totcts from fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jul 26 08:48:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 08:48:37 2012] Using photon index=1.80, rate=0.00973, arf fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src8.arf
[Thu Jul 26 08:48:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 08:48:37 2012] Updating source flux to 3.8e-14
[Thu Jul 26 08:48:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 26 08:49:14 2012] xmm0070340401/analysis//spectral/fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete