[Wed Jul 25 22:20:55 2012] Detection parameters:
  Position = (376.2, 212.0) = 13 50 0.76 59 59 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.1 +/- 15.5
  Background counts = 63.1
  Rate = 0.006 +/- 0.001

[Wed Jul 25 22:20:56 2012] Off-axis axis estimate = 8.43'
[Wed Jul 25 22:23:00 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:23:00 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Wed Jul 25 22:23:00 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Wed Jul 25 22:23:00 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 10.64"
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src74.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src74.csv
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src74_1.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src74.csv
[Thu Jul 26 02:53:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:53:14 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Thu Jul 26 02:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src74.csv
[Thu Jul 26 02:53:14 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Thu Jul 26 02:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src74.csv
[Thu Jul 26 02:53:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:58:55 2012] Source 76 is offset by 2.557596 and 8.759550 pixels which is larger than
2 X fitted extent = 4.121706 x 4.121706, not incorporating fit results
[Thu Jul 26 02:58:56 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 02:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 02:58:56 2012] Assessing source extent using major
[Thu Jul 26 02:58:56 2012] Source does appear to be extended
[Thu Jul 26 02:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 02:59:07 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 02:59:07 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Thu Jul 26 02:59:07 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Thu Jul 26 02:59:07 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 10.64"
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src72.ximg exists
[Thu Jul 26 07:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src72.csv
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src72_1.ximg exists
[Thu Jul 26 07:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src72.csv
[Thu Jul 26 07:54:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 07:54:36 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Thu Jul 26 07:54:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src72.csv
[Thu Jul 26 07:54:36 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Thu Jul 26 07:54:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src72.csv
[Thu Jul 26 07:54:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 08:00:28 2012] Source 76 is offset by 5.226860 and -3.037300 pixels which is larger than
2 X fitted extent = 0.873903 x 0.873903, not incorporating fit results
[Thu Jul 26 08:00:28 2012] Warning, spatial fit 72 centroid is now closest to src. 75
[Thu Jul 26 08:00:28 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 08:00:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 08:00:28 2012] Assessing source extent using major
[Thu Jul 26 08:00:28 2012] Source does appear to be extended
[Thu Jul 26 08:00:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 08:00:28 2012] Source is confused with source 16
[Thu Jul 26 08:00:42 2012] XMMSAS src. selection expression = ellipse(32682.472839, 18393.018875, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 08:00:42 2012] Writing source region out to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src76_src.reg
[Thu Jul 26 08:00:42 2012] Extracting stamp from image fullrun_pn_xmm0070340401_pi300-10000_cl_sm2.00.img.gz, (339, 174) - (414, 249)
[Thu Jul 26 08:00:42 2012] XMMSAS bgd. selection expression = annulus(32682.472839, 18393.018875, 1087.500000, 2175.000000, X, Y) && !ellipse(35490.997345, 17092.440826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31180.875885, 20171.828766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33162.802000, 19022.346400, 1667.016048, 1667.016048, 0.000000, X, Y) && !ellipse(33410.404877, 18385.215744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33892.733429, 18123.634293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33331.085876, 17788.350555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34407.418823, 17545.694153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33715.706696, 17614.379761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34912.883301, 17172.401016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33270.083923, 16592.383316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34817.169495, 16451.808807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34184.539734, 15568.913330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30284.453033, 20567.510437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31725.579041, 19674.650635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30803.431610, 19436.649826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31658.661682, 19235.438431, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 08:00:42 2012] Writing fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src76.gif
[Thu Jul 26 08:29:16 2012] Mean detx,y = (-3070.22, 11342.95) 
[Thu Jul 26 08:29:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 08:29:37 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 08:29:37 2012] Setting source spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Thu Jul 26 08:29:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Thu Jul 26 08:46:21 2012] Not generating rmf since there are only 69 counts
[Thu Jul 26 08:46:21 2012] rmf not generated due to insufficient counts
[Thu Jul 26 08:48:36 2012] Updating aperture counts using extracted products
[Thu Jul 26 08:48:36 2012] Error reading totcts from fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Thu Jul 26 08:48:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 08:48:38 2012] Using photon index=1.80, rate=0.00586, arf fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src76.arf
[Thu Jul 26 08:48:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 08:48:38 2012] Updating source flux to 3e-14
[Thu Jul 26 08:48:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting