[Wed Jul 25 22:20:55 2012] Detection parameters:
  Position = (354.6, 224.0) = 13 50 13.27 60 0 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.9 +/- 15.0
  Background counts = 75.3
  Rate = 0.006 +/- 0.001

[Wed Jul 25 22:20:56 2012] Off-axis axis estimate = 6.76'
[Wed Jul 25 22:23:00 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:23:00 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Wed Jul 25 22:23:00 2012] source mask rpix=2.3, npix_max = 30, mask sum = 27, frac = 0.889
[Wed Jul 25 22:23:00 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 9.81"
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src72.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src72.csv
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src72_1.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src72.csv
[Thu Jul 26 02:53:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:53:14 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Thu Jul 26 02:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src72.csv
[Thu Jul 26 02:53:14 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Thu Jul 26 02:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src72.csv
[Thu Jul 26 02:53:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:58:55 2012] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 10.113143 pixels away
[Thu Jul 26 02:58:56 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 02:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 02:58:56 2012] Assessing source extent using major
[Thu Jul 26 02:58:56 2012] Source does appear to be extended
[Thu Jul 26 02:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 02:59:07 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 02:59:07 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Thu Jul 26 02:59:07 2012] source mask rpix=2.3, npix_max = 30, mask sum = 27, frac = 0.889
[Thu Jul 26 02:59:07 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 9.81"
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src70.ximg exists
[Thu Jul 26 07:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src70.csv
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src70_1.ximg exists
[Thu Jul 26 07:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src70.csv
[Thu Jul 26 07:54:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 07:54:36 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Thu Jul 26 07:54:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src70.csv
[Thu Jul 26 07:54:36 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Thu Jul 26 07:54:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src70.csv
[Thu Jul 26 07:54:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 08:00:28 2012] Source 74 is offset by 9.272800 and -3.107728 pixels which is larger than
2 X fitted extent = 1.129582 x 1.129582, not incorporating fit results
[Thu Jul 26 08:00:28 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 08:00:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 08:00:28 2012] Assessing source extent using major
[Thu Jul 26 08:00:28 2012] Source does appear to be extended
[Thu Jul 26 08:00:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 08:00:42 2012] XMMSAS src. selection expression = ellipse(30803.431610, 19436.649826, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 08:00:42 2012] Writing source region out to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src74_src.reg
[Thu Jul 26 08:00:42 2012] Extracting stamp from image fullrun_pn_xmm0070340401_pi300-10000_cl_sm2.00.img.gz, (317, 186) - (392, 261)
[Thu Jul 26 08:00:42 2012] XMMSAS bgd. selection expression = annulus(30803.431610, 19436.649826, 1087.500000, 2175.000000, X, Y) && !ellipse(29171.244385, 21184.358704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31180.875885, 20171.828766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33162.802000, 19022.346400, 1667.016048, 1667.016048, 0.000000, X, Y) && !ellipse(33410.404877, 18385.215744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33331.085876, 17788.350555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33715.706696, 17614.379761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33270.083923, 16592.383316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28165.909576, 22461.385315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28053.506256, 21866.686630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28508.790680, 21524.321930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27812.365875, 20750.030426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30284.453033, 20567.510437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31725.579041, 19674.650635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31658.661682, 19235.438431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32682.472839, 18393.018875, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 08:00:42 2012] Writing fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src74.gif
[Thu Jul 26 08:28:25 2012] Mean detx,y = (-3273.57, 9266.30) 
[Thu Jul 26 08:28:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 08:28:43 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 08:28:43 2012] Setting source spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Thu Jul 26 08:28:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Thu Jul 26 08:46:02 2012] Not generating rmf since there are only 65 counts
[Thu Jul 26 08:46:02 2012] rmf not generated due to insufficient counts
[Thu Jul 26 08:48:36 2012] Updating aperture counts using extracted products
[Thu Jul 26 08:48:36 2012] Error reading totcts from fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Thu Jul 26 08:48:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 08:48:38 2012] Using photon index=1.80, rate=0.00559, arf fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src74.arf
[Thu Jul 26 08:48:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 08:48:38 2012] Updating source flux to 2.5e-14
[Thu Jul 26 08:48:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting