[Wed Jul 25 22:20:55 2012] Detection parameters:
  Position = (254.6, 246.2) = 13 51 11.29 60 2 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.0 +/- 16.7
  Background counts = 87.5
  Rate = 0.006 +/- 0.001

[Wed Jul 25 22:20:56 2012] Off-axis axis estimate = 4.94'
[Wed Jul 25 22:23:00 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:23:00 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Wed Jul 25 22:23:00 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.964
[Wed Jul 25 22:23:00 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 8.90"
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src65.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src65.csv
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src65_1.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src65.csv
[Thu Jul 26 02:53:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:53:14 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Thu Jul 26 02:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src65.csv
[Thu Jul 26 02:53:14 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Thu Jul 26 02:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src65.csv
[Thu Jul 26 02:53:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:58:55 2012] Warning, spatial fit 65 centroid is now closest to src. 7
[Thu Jul 26 02:58:56 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 02:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 02:58:56 2012] Assessing source extent using major
[Thu Jul 26 02:58:56 2012] Source does appear to be extended
[Thu Jul 26 02:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 02:59:07 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 02:59:07 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Thu Jul 26 02:59:07 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.964
[Thu Jul 26 02:59:07 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 8.90"
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src63.ximg exists
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src63_1.ximg exists
[Thu Jul 26 07:54:34 2012] Fit fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src63 appears to have run properly
[Thu Jul 26 07:54:36 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Thu Jul 26 07:54:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src63.csv
[Thu Jul 26 07:54:36 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Thu Jul 26 07:54:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src63.csv
[Thu Jul 26 07:54:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 08:00:28 2012] Source 67 is offset by -1.777745 and -5.337945 pixels which is larger than
2 X fitted extent = 1.854818 x 1.854818, not incorporating fit results
[Thu Jul 26 08:00:28 2012] Warning, spatial fit 63 centroid is now closest to src. 3
[Thu Jul 26 08:00:28 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 08:00:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 08:00:28 2012] Assessing source extent using major
[Thu Jul 26 08:00:28 2012] Source does appear to be extended
[Thu Jul 26 08:00:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 08:00:41 2012] XMMSAS src. selection expression = ellipse(22106.040176, 21372.184769, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 08:00:41 2012] Writing source region out to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src67_src.reg
[Thu Jul 26 08:00:41 2012] Extracting stamp from image fullrun_pn_xmm0070340401_pi300-10000_cl_sm2.00.img.gz, (217, 209) - (292, 284)
[Thu Jul 26 08:00:41 2012] XMMSAS bgd. selection expression = annulus(22106.040176, 21372.184769, 1087.500000, 2175.000000, X, Y) && !ellipse(21674.170456, 23617.162048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21442.213821, 22651.323456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22234.390930, 23000.194305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21087.840424, 22072.317322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19839.056686, 21347.608490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19525.056992, 19541.705353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22519.562317, 24401.096619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24299.382446, 24241.800171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23065.773529, 24199.548035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22062.541504, 24050.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22230.275635, 23615.871704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23851.030304, 23620.332153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23596.550000, 23061.972000, 1275.480037, 1275.480037, 0.000000, X, Y) && !ellipse(21141.498566, 23255.345276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24221.770630, 23179.974304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24747.896545, 22920.984161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21615.821000, 22341.428000, 1397.744040, 1397.744040, 0.000000, X, Y) && !ellipse(23676.039978, 22125.064789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24914.388123, 22232.901459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19734.045600, 20626.439800, 1579.280045, 1579.280045, 0.000000, X, Y) && !ellipse(19285.826000, 20373.296000, 1636.008047, 1636.008047, 0.000000, X, Y)
[Thu Jul 26 08:00:41 2012] Writing fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src67.gif
[Thu Jul 26 08:25:25 2012] Mean detx,y = (-6932.94, 1122.78) 
[Thu Jul 26 08:25:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 08:25:45 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 08:25:45 2012] Setting source spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Thu Jul 26 08:25:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Thu Jul 26 08:42:46 2012] Not generating rmf since there are only 71 counts
[Thu Jul 26 08:42:46 2012] rmf not generated due to insufficient counts
[Thu Jul 26 08:48:36 2012] Updating aperture counts using extracted products
[Thu Jul 26 08:48:36 2012] Error reading totcts from fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Thu Jul 26 08:48:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 08:48:38 2012] Using photon index=1.80, rate=0.00603, arf fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src67.arf
[Thu Jul 26 08:48:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 08:48:38 2012] Updating source flux to 2.3e-14
[Thu Jul 26 08:48:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting