[Wed Jul 25 22:20:55 2012] Detection parameters:
  Position = (323.0, 251.9) = 13 50 31.60 60 2 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.6 +/- 15.4
  Background counts = 68.3
  Rate = 0.01 +/- 0.002

[Wed Jul 25 22:20:56 2012] Off-axis axis estimate = 3.82'
[Wed Jul 25 22:23:00 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:23:00 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Wed Jul 25 22:23:00 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.856
[Wed Jul 25 22:23:00 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 8.34"
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src63.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src63.csv
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src63_1.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src63.csv
[Thu Jul 26 02:53:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:53:14 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Thu Jul 26 02:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src63.csv
[Thu Jul 26 02:53:14 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Thu Jul 26 02:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src63.csv
[Thu Jul 26 02:53:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:58:55 2012] Warning, spatial fit 63 centroid is now closest to src. 64
[Thu Jul 26 02:58:55 2012] Source 65 is offset by -1.420342 and 0.884782 pixels which is larger than
2 X fitted extent = 1.388791 x 1.388791, not incorporating fit results
[Thu Jul 26 02:58:56 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 02:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 02:58:56 2012] Assessing source extent using major
[Thu Jul 26 02:58:56 2012] Source does appear to be extended
[Thu Jul 26 02:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 02:58:56 2012] Source is confused with source 58
[Thu Jul 26 02:59:07 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 02:59:07 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Thu Jul 26 02:59:07 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.856
[Thu Jul 26 02:59:07 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 8.34"
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src61.ximg exists
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src61_1.ximg exists
[Thu Jul 26 07:54:34 2012] Fit fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src61 appears to have run properly
[Thu Jul 26 07:54:36 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Thu Jul 26 07:54:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src61.csv
[Thu Jul 26 07:54:36 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Thu Jul 26 07:54:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src61.csv
[Thu Jul 26 07:54:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 08:00:28 2012] Source 65 is offset by -1.229418 and -3.099156 pixels which is larger than
2 X fitted extent = 1.363159 x 1.363159, not incorporating fit results
[Thu Jul 26 08:00:28 2012] Source 65 is offset by -1.429284 and 0.900844 pixels which is larger than
2 X fitted extent = 1.363159 x 1.363159, not incorporating fit results
[Thu Jul 26 08:00:28 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 08:00:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 08:00:28 2012] Assessing source extent using major
[Thu Jul 26 08:00:28 2012] Source does appear to be extended
[Thu Jul 26 08:00:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 08:00:41 2012] XMMSAS src. selection expression = ellipse(28053.506256, 21866.686630, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 08:00:41 2012] Writing source region out to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src65_src.reg
[Thu Jul 26 08:00:41 2012] Extracting stamp from image fullrun_pn_xmm0070340401_pi300-10000_cl_sm2.00.img.gz, (286, 214) - (361, 289)
[Thu Jul 26 08:00:41 2012] XMMSAS bgd. selection expression = annulus(28053.506256, 21866.686630, 1087.500000, 2175.000000, X, Y) && !ellipse(27512.228088, 22856.007629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29171.244385, 21184.358704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25371.496552, 23805.655853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26776.453094, 23459.201080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26036.424744, 23786.388306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.979340, 23388.062225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26641.901520, 23089.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25799.314697, 23112.656036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.882477, 22737.919891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25456.128265, 22432.153442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28165.909576, 22461.385315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.532562, 21892.218719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27461.952454, 21979.279785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28508.790680, 21524.321930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27812.365875, 20750.030426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30284.453033, 20567.510437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30803.431610, 19436.649826, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 08:00:41 2012] Writing fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src65.gif
[Thu Jul 26 08:24:44 2012] Mean detx,y = (-3073.06, 5617.38) 
[Thu Jul 26 08:24:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 08:25:03 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 08:25:04 2012] Setting source spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Thu Jul 26 08:25:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Thu Jul 26 08:42:32 2012] Not generating rmf since there are only 79 counts
[Thu Jul 26 08:42:32 2012] rmf not generated due to insufficient counts
[Thu Jul 26 08:48:36 2012] Updating aperture counts using extracted products
[Thu Jul 26 08:48:36 2012] Error reading totcts from fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Thu Jul 26 08:48:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 08:48:38 2012] Using photon index=1.80, rate=0.0125, arf fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src65.arf
[Thu Jul 26 08:48:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 08:48:38 2012] Updating source flux to 4.3e-14
[Thu Jul 26 08:48:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting