[Wed Jul 25 22:20:55 2012] Detection parameters:
  Position = (316.2, 253.2) = 13 50 35.54 60 2 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.0 +/- 16.3
  Background counts = 71.0
  Rate = 0.01 +/- 0.003

[Wed Jul 25 22:20:56 2012] Off-axis axis estimate = 3.52'
[Wed Jul 25 22:23:00 2012] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:23:00 2012] Initial guess for spatial extent in simple fitting = 8.19"
[Wed Jul 25 22:23:00 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.101
[Wed Jul 25 22:23:00 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 8.19"
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src62.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src62.csv
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src62_1.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src62.csv
[Thu Jul 26 02:53:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:53:14 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Thu Jul 26 02:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src62.csv
[Thu Jul 26 02:53:14 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Thu Jul 26 02:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src62.csv
[Thu Jul 26 02:53:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:58:55 2012] Warning, spatial fit 62 centroid is now closest to src. 56
[Thu Jul 26 02:58:55 2012] Source 64 is offset by 1.968442 and -0.478244 pixels which is larger than
2 X fitted extent = 1.094543 x 1.094543, not incorporating fit results
[Thu Jul 26 02:58:56 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 02:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 02:58:56 2012] Assessing source extent using major
[Thu Jul 26 02:58:56 2012] Source does appear to be extended
[Thu Jul 26 02:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 02:58:56 2012] Source is confused with source 65
[Thu Jul 26 02:59:07 2012] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 02:59:07 2012] Initial guess for spatial extent in simple fitting = 8.19"
[Thu Jul 26 02:59:07 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.101
[Thu Jul 26 02:59:07 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 8.19"
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src60.ximg exists
[Thu Jul 26 07:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src60.csv
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src60_1.ximg exists
[Thu Jul 26 07:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src60.csv
[Thu Jul 26 07:54:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 07:54:36 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Thu Jul 26 07:54:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src60.csv
[Thu Jul 26 07:54:36 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Thu Jul 26 07:54:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src60.csv
[Thu Jul 26 07:54:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 08:00:28 2012] Source 64 is offset by 2.278350 and -4.883382 pixels which is larger than
2 X fitted extent = 0.941457 x 0.941457, not incorporating fit results
[Thu Jul 26 08:00:28 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 08:00:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 08:00:28 2012] Assessing source extent using major
[Thu Jul 26 08:00:28 2012] Source does appear to be extended
[Thu Jul 26 08:00:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 08:00:41 2012] XMMSAS src. selection expression = ellipse(27461.952454, 21979.279785, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 08:00:41 2012] Writing source region out to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src64_src.reg
[Thu Jul 26 08:00:41 2012] Extracting stamp from image fullrun_pn_xmm0070340401_pi300-10000_cl_sm2.00.img.gz, (279, 216) - (354, 291)
[Thu Jul 26 08:00:41 2012] XMMSAS bgd. selection expression = annulus(27461.952454, 21979.279785, 1087.500000, 2175.000000, X, Y) && !ellipse(27512.228088, 22856.007629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29171.244385, 21184.358704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.464966, 24560.103668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25371.496552, 23805.655853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26776.453094, 23459.201080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26036.424744, 23786.388306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.979340, 23388.062225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26641.901520, 23089.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25799.314697, 23112.656036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24747.896545, 22920.984161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.882477, 22737.919891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25456.128265, 22432.153442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28165.909576, 22461.385315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.532562, 21892.218719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24914.388123, 22232.901459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28053.506256, 21866.686630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28508.790680, 21524.321930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27812.365875, 20750.030426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30284.453033, 20567.510437, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 08:00:41 2012] Writing fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src64.gif
[Thu Jul 26 08:24:21 2012] Mean detx,y = (-3218.45, 5056.30) 
[Thu Jul 26 08:24:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 08:24:39 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 08:24:39 2012] Setting source spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Thu Jul 26 08:24:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Thu Jul 26 08:42:24 2012] Not generating rmf since there are only 85 counts
[Thu Jul 26 08:42:24 2012] rmf not generated due to insufficient counts
[Thu Jul 26 08:48:36 2012] Updating aperture counts using extracted products
[Thu Jul 26 08:48:36 2012] Error reading totcts from fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Thu Jul 26 08:48:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 08:48:38 2012] Using photon index=1.80, rate=0.0133, arf fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src64.arf
[Thu Jul 26 08:48:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 08:48:38 2012] Updating source flux to 4.6e-14
[Thu Jul 26 08:48:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting