[Wed Jul 25 22:20:53 2012] Detection parameters:
  Position = (316.8, 263.3) = 13 50 35.20 60 3 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.2 +/- 16.2
  Background counts = 59.0
  Rate = 0.02 +/- 0.003

[Wed Jul 25 22:20:56 2012] Off-axis axis estimate = 2.88'
[Wed Jul 25 22:23:00 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:23:00 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Wed Jul 25 22:23:00 2012] source mask rpix=1.8, npix_max = 21, mask sum = 24, frac = 1.126
[Wed Jul 25 22:23:00 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.87"
[Thu Jul 26 02:53:10 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jul 26 02:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src4.csv
[Thu Jul 26 02:53:10 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jul 26 02:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src4.csv
[Thu Jul 26 02:53:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jul 26 02:53:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:58:55 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.900586 pixels away
[Thu Jul 26 02:58:55 2012] Spatial fit model total counts = 228.704000, observed total counts = 185.000000
[Thu Jul 26 02:58:55 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 26 02:58:56 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 02:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 02:58:56 2012] Assessing source extent using major
[Thu Jul 26 02:58:56 2012] Source does appear to be extended
[Thu Jul 26 02:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 02:59:07 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 02:59:07 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Thu Jul 26 02:59:07 2012] source mask rpix=1.8, npix_max = 21, mask sum = 24, frac = 1.126
[Thu Jul 26 02:59:07 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.87"
[Thu Jul 26 07:54:32 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jul 26 07:54:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src4.csv
[Thu Jul 26 07:54:32 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jul 26 07:54:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src4.csv
[Thu Jul 26 07:54:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jul 26 07:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jul 26 07:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jul 26 07:54:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 08:00:28 2012] Spatial fit model total counts = 251.855000, observed total counts = 189.000000
[Thu Jul 26 08:00:28 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 26 08:00:28 2012] Source 6 is offset by 3.129288 and 2.930892 pixels which is larger than
2 X fitted extent = 1.832589 x 1.832589, not incorporating fit results
[Thu Jul 26 08:00:28 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 08:00:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 08:00:28 2012] Assessing source extent using major
[Thu Jul 26 08:00:28 2012] Source does appear to be extended
[Thu Jul 26 08:00:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 08:00:39 2012] XMMSAS src. selection expression = ellipse(27512.228088, 22856.007629, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 08:00:39 2012] Writing source region out to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src6_src.reg
[Thu Jul 26 08:00:39 2012] Extracting stamp from image fullrun_pn_xmm0070340401_pi300-10000_cl_sm2.00.img.gz, (279, 226) - (354, 301)
[Thu Jul 26 08:00:39 2012] XMMSAS bgd. selection expression = annulus(27512.228088, 22856.007629, 1087.500000, 2175.000000, X, Y) && !ellipse(29171.244385, 21184.358704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.464966, 24560.103668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25371.496552, 23805.655853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26776.453094, 23459.201080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26036.424744, 23786.388306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.979340, 23388.062225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26641.901520, 23089.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25799.314697, 23112.656036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24747.896545, 22920.984161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.882477, 22737.919891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25456.128265, 22432.153442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28165.909576, 22461.385315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.532562, 21892.218719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24914.388123, 22232.901459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27461.952454, 21979.279785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28053.506256, 21866.686630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28508.790680, 21524.321930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27812.365875, 20750.030426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30284.453033, 20567.510437, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 08:00:39 2012] Writing fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src6.gif
[Thu Jul 26 08:02:39 2012] Mean detx,y = (-2683.92, 4595.97) 
[Thu Jul 26 08:02:41 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 08:02:57 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 08:02:58 2012] Setting source spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jul 26 08:02:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Jul 26 08:31:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 08:31:05 2012] rmf not generated due to insufficient counts
[Thu Jul 26 08:48:35 2012] Updating aperture counts using extracted products
[Thu Jul 26 08:48:35 2012] Error reading totcts from fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jul 26 08:48:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 08:48:37 2012] Using photon index=1.80, rate=0.0213, arf fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src6.arf
[Thu Jul 26 08:48:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 08:48:37 2012] Updating source flux to 8.8e-14
[Thu Jul 26 08:48:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 26 08:49:14 2012] xmm0070340401/analysis//spectral/fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete