[Wed Jul 25 22:20:54 2012] Detection parameters:
  Position = (280.9, 285.1) = 13 50 56.08 60 4 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.2 +/- 18.9
  Background counts = 56.8
  Rate = 0.02 +/- 0.003

[Wed Jul 25 22:20:56 2012] Off-axis axis estimate = 1.60'
[Wed Jul 25 22:23:00 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:23:00 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Wed Jul 25 22:23:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Wed Jul 25 22:23:00 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.23"
[Thu Jul 26 02:53:11 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src35.ximg exists
[Thu Jul 26 02:53:11 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src35_1.ximg exists
[Thu Jul 26 02:53:11 2012] Fit fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src35 appears to have run properly
[Thu Jul 26 02:53:13 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Thu Jul 26 02:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src35.csv
[Thu Jul 26 02:53:13 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Thu Jul 26 02:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src35.csv
[Thu Jul 26 02:53:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:58:55 2012] Source 37 is offset by -0.066695 and -5.178035 pixels which is larger than
2 X fitted extent = 0.867982 x 0.867982, not incorporating fit results
[Thu Jul 26 02:58:55 2012] Warning, spatial fit 35 centroid is now closest to src. 40
[Thu Jul 26 02:58:55 2012] Spatial fit model total counts = 211.057000, observed total counts = 178.000000
[Thu Jul 26 02:58:55 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 26 02:58:56 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 02:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 02:58:56 2012] Assessing source extent using major
[Thu Jul 26 02:58:56 2012] Source does appear to be extended
[Thu Jul 26 02:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 02:58:56 2012] Source is confused with source 38
[Thu Jul 26 02:58:56 2012] Source is confused with source 40
[Thu Jul 26 02:59:07 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 02:59:07 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Thu Jul 26 02:59:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Thu Jul 26 02:59:07 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 7.23"
[Thu Jul 26 07:54:33 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src35.ximg exists
[Thu Jul 26 07:54:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src35.csv
[Thu Jul 26 07:54:33 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu Jul 26 07:54:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src35.csv
[Thu Jul 26 07:54:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 07:54:35 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu Jul 26 07:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu Jul 26 07:54:35 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu Jul 26 07:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu Jul 26 07:54:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 08:00:28 2012] Source 37 is offset by 0.146408 and -2.172012 pixels which is larger than
2 X fitted extent = 0.841347 x 0.841347, not incorporating fit results
[Thu Jul 26 08:00:28 2012] Source 37 is offset by -5.664190 and -7.444127 pixels which is larger than
2 X fitted extent = 6.541334 x 6.541334, not incorporating fit results
[Thu Jul 26 08:00:28 2012] Spatial fit model total counts = 212.801000, observed total counts = 178.000000
[Thu Jul 26 08:00:28 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 26 08:00:28 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 08:00:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 08:00:28 2012] Assessing source extent using major
[Thu Jul 26 08:00:28 2012] Source does appear to be extended
[Thu Jul 26 08:00:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 08:00:40 2012] XMMSAS src. selection expression = ellipse(24387.813507, 24754.958923, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 08:00:40 2012] Writing source region out to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src37_src.reg
[Thu Jul 26 08:00:40 2012] Extracting stamp from image fullrun_pn_xmm0070340401_pi300-10000_cl_sm2.00.img.gz, (243, 248) - (318, 323)
[Thu Jul 26 08:00:40 2012] XMMSAS bgd. selection expression = annulus(24387.813507, 24754.958923, 1087.500000, 2175.000000, X, Y) && !ellipse(21674.170456, 23617.162048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21442.213821, 22651.323456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22234.390930, 23000.194305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23814.911285, 25513.460968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23437.108582, 24857.177551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.464966, 24560.103668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22519.562317, 24401.096619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24299.382446, 24241.800171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23065.773529, 24199.548035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22062.541504, 24050.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25371.496552, 23805.655853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22230.275635, 23615.871704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23851.030304, 23620.332153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26776.453094, 23459.201080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23596.550000, 23061.972000, 1275.480037, 1275.480037, 0.000000, X, Y) && !ellipse(26036.424744, 23786.388306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.979340, 23388.062225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24221.770630, 23179.974304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26641.901520, 23089.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25799.314697, 23112.656036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24747.896545, 22920.984161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.882477, 22737.919891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25456.128265, 22432.153442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21615.821000, 22341.428000, 1397.744040, 1397.744040, 0.000000, X, Y) && !ellipse(23676.039978, 22125.064789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.532562, 21892.218719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24914.388123, 22232.901459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23124.428436, 25523.011108, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 08:00:40 2012] Writing fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src37.gif
[Thu Jul 26 08:14:38 2012] Mean detx,y = (-2899.65, 916.18) 
[Thu Jul 26 08:14:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 08:14:56 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 08:14:57 2012] Setting source spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Thu Jul 26 08:14:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Thu Jul 26 08:36:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 08:36:40 2012] rmf not generated due to insufficient counts
[Thu Jul 26 08:48:36 2012] Updating aperture counts using extracted products
[Thu Jul 26 08:48:36 2012] Error reading totcts from fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Thu Jul 26 08:48:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 08:48:37 2012] Using photon index=1.80, rate=0.0186, arf fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src37.arf
[Thu Jul 26 08:48:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 08:48:37 2012] Updating source flux to 5.6e-14
[Thu Jul 26 08:48:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 26 08:49:14 2012] xmm0070340401/analysis//spectral/fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete