[Wed Jul 25 22:20:54 2012] Detection parameters:
  Position = (274.3, 293.8) = 13 50 59.91 60 5 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.9 +/- 16.9
  Background counts = 52.4
  Rate = 0.02 +/- 0.002

[Wed Jul 25 22:20:56 2012] Off-axis axis estimate = 1.78'
[Wed Jul 25 22:23:00 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 22:23:00 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed Jul 25 22:23:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Wed Jul 25 22:23:00 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.32"
[Thu Jul 26 02:53:11 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src33.ximg exists
[Thu Jul 26 02:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src33.csv
[Thu Jul 26 02:53:11 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Jul 26 02:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src33.csv
[Thu Jul 26 02:53:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:53:13 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Jul 26 02:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jul 26 02:53:13 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Jul 26 02:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jul 26 02:53:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 02:58:55 2012] Warning, spatial fit 33 centroid is now closest to src. 37
[Thu Jul 26 02:58:55 2012] Source 35 is offset by 0.016130 and -2.826908 pixels which is larger than
2 X fitted extent = 0.929241 x 0.929241, not incorporating fit results
[Thu Jul 26 02:58:56 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 02:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 02:58:56 2012] Assessing source extent using major
[Thu Jul 26 02:58:56 2012] Source does appear to be extended
[Thu Jul 26 02:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 02:59:07 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 02:59:07 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Thu Jul 26 02:59:07 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Thu Jul 26 02:59:07 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 7.32"
[Thu Jul 26 07:54:33 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src33.ximg exists
[Thu Jul 26 07:54:33 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu Jul 26 07:54:33 2012] Fit fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src33 appears to have run properly
[Thu Jul 26 07:54:35 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu Jul 26 07:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu Jul 26 07:54:35 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Jul 26 07:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu Jul 26 07:54:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 08:00:28 2012] Warning, spatial fit 33 centroid is now closest to src. 37
[Thu Jul 26 08:00:28 2012] Source 35 is offset by -0.005548 and 3.218057 pixels which is larger than
2 X fitted extent = 0.979361 x 0.979361, not incorporating fit results
[Thu Jul 26 08:00:28 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 08:00:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 08:00:28 2012] Assessing source extent using major
[Thu Jul 26 08:00:28 2012] Source does appear to be extended
[Thu Jul 26 08:00:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 08:00:40 2012] XMMSAS src. selection expression = ellipse(23814.911285, 25513.460968, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 08:00:40 2012] Writing source region out to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src35_src.reg
[Thu Jul 26 08:00:40 2012] Extracting stamp from image fullrun_pn_xmm0070340401_pi300-10000_cl_sm2.00.img.gz, (237, 256) - (312, 331)
[Thu Jul 26 08:00:40 2012] XMMSAS bgd. selection expression = annulus(23814.911285, 25513.460968, 1087.500000, 2175.000000, X, Y) && !ellipse(21674.170456, 23617.162048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21442.213821, 22651.323456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22234.390930, 23000.194305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23437.108582, 24857.177551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24387.813507, 24754.958923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.464966, 24560.103668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22519.562317, 24401.096619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24299.382446, 24241.800171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23065.773529, 24199.548035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22062.541504, 24050.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25371.496552, 23805.655853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22230.275635, 23615.871704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23851.030304, 23620.332153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26776.453094, 23459.201080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23596.550000, 23061.972000, 1275.480037, 1275.480037, 0.000000, X, Y) && !ellipse(26036.424744, 23786.388306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21141.498566, 23255.345276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.979340, 23388.062225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24221.770630, 23179.974304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26641.901520, 23089.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25799.314697, 23112.656036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24747.896545, 22920.984161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.882477, 22737.919891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21615.821000, 22341.428000, 1397.744040, 1397.744040, 0.000000, X, Y) && !ellipse(23124.428436, 25523.011108, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 08:00:40 2012] Writing fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src35.gif
[Thu Jul 26 08:13:35 2012] Mean detx,y = (-2745.12, 28.48) 
[Thu Jul 26 08:13:37 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 08:14:05 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 08:14:05 2012] Setting source spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Jul 26 08:14:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu Jul 26 08:36:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 08:36:21 2012] rmf not generated due to insufficient counts
[Thu Jul 26 08:48:36 2012] Updating aperture counts using extracted products
[Thu Jul 26 08:48:36 2012] Error reading totcts from fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Jul 26 08:48:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 08:48:37 2012] Using photon index=1.80, rate=0.0166, arf fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src35.arf
[Thu Jul 26 08:48:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 08:48:37 2012] Updating source flux to 5.4e-14
[Thu Jul 26 08:48:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 26 08:49:14 2012] xmm0070340401/analysis//spectral/fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete