[Wed Jul 25 22:20:54 2012] Detection parameters: Position = (375.3, 219.6) = 13 50 1.26 60 0 12.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 104.4 +/- 15.4 Background counts = 58.7 Rate = 0.009 +/- 0.001 [Wed Jul 25 22:20:56 2012] Off-axis axis estimate = 7.98' [Wed Jul 25 22:23:00 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting [Wed Jul 25 22:23:00 2012] Initial guess for spatial extent in simple fitting = 10.42" [Wed Jul 25 22:23:00 2012] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.984 [Wed Jul 25 22:23:00 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 10.42" [Thu Jul 26 02:53:10 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src14.ximg exists [Thu Jul 26 02:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src14.csv [Thu Jul 26 02:53:10 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src14_1.ximg exists [Thu Jul 26 02:53:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src14.csv [Thu Jul 26 02:53:10 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src14_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists [Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src14.csv [Thu Jul 26 02:53:12 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists [Thu Jul 26 02:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src14.csv [Thu Jul 26 02:53:12 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jul 26 02:58:55 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.574391 pixels away [Thu Jul 26 02:58:56 2012] Vigneting correction estimate = 1.000000 [Thu Jul 26 02:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jul 26 02:58:56 2012] Assessing source extent using major [Thu Jul 26 02:58:56 2012] Source does appear to be extended [Thu Jul 26 02:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jul 26 02:59:07 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting [Thu Jul 26 02:59:07 2012] Initial guess for spatial extent in simple fitting = 10.42" [Thu Jul 26 02:59:07 2012] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.984 [Thu Jul 26 02:59:07 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 10.42" [Thu Jul 26 07:54:32 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src14.ximg exists [Thu Jul 26 07:54:32 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src14_1.ximg exists [Thu Jul 26 07:54:33 2012] Fit fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_src14 appears to have run properly [Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists [Thu Jul 26 07:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src14.csv [Thu Jul 26 07:54:34 2012] fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists [Thu Jul 26 07:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src14.csv [Thu Jul 26 07:54:34 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0070340401_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jul 26 08:00:28 2012] Spatial fit model total counts = 207.021000, observed total counts = 221.000000 [Thu Jul 26 08:00:28 2012] Offset between fit and detection position for source 16 = 6.414459 pixels [Thu Jul 26 08:00:28 2012] 193.585700 total counts/ 119.675000 bgd. counts: snr = 6.756248 Spatial fit parameters: Offset between fit and detection position for source 16 = 6.414459 pixels Position = (381.7, 219.2) = 13 49 57.55 60 0 8.2 Extent = 20.8" x 20.8", rotation angle = 0 Source counts = 73.9 +/- 13.9 Background counts = 119.7 Rate = 0.04 +/- 0.008 [Thu Jul 26 08:00:28 2012] Vigneting correction estimate = 1.000000 [Thu Jul 26 08:00:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jul 26 08:00:28 2012] Assessing source extent using major [Thu Jul 26 08:00:28 2012] Source does appear to be extended [Thu Jul 26 08:00:28 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jul 26 08:00:28 2012] Source is confused with source 18 [Thu Jul 26 08:00:28 2012] Source is confused with source 19 [Thu Jul 26 08:00:28 2012] Source is confused with source 20 [Thu Jul 26 08:00:28 2012] Source is confused with source 76 [Thu Jul 26 08:00:39 2012] XMMSAS src. selection expression = ellipse(33162.802000, 19022.346400, 1250.262036, 1250.262036, 0.000000, X, Y) [Thu Jul 26 08:00:39 2012] Writing source region out to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src16_src.reg [Thu Jul 26 08:00:39 2012] Extracting stamp from image fullrun_pn_xmm0070340401_pi300-10000_cl_sm2.00.img.gz, (310, 147) - (454, 291) [Thu Jul 26 08:00:39 2012] XMMSAS bgd. selection expression = annulus(33162.802000, 19022.346400, 2083.770060, 4167.540120, X, Y) && !ellipse(35490.997345, 17092.440826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29171.244385, 21184.358704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31180.875885, 20171.828766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33410.404877, 18385.215744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33892.733429, 18123.634293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33331.085876, 17788.350555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34407.418823, 17545.694153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33715.706696, 17614.379761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34912.883301, 17172.401016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33270.083923, 16592.383316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34817.169495, 16451.808807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34184.539734, 15568.913330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28165.909576, 22461.385315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28508.790680, 21524.321930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30284.453033, 20567.510437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31725.579041, 19674.650635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30803.431610, 19436.649826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31658.661682, 19235.438431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32682.472839, 18393.018875, 870.000000, 870.000000, 0.000000, X, Y) [Thu Jul 26 08:00:39 2012] Writing fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src16.gif [Thu Jul 26 08:06:12 2012] Mean detx,y = (-2453.42, 11337.47) [Thu Jul 26 08:06:14 2012] Setting backscal keywords in source and bgd. spectrum [Thu Jul 26 08:06:44 2012] Binned source spectrum to 10 counts/bin [Thu Jul 26 08:06:44 2012] Setting source spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src16_src_b10.pi.gz [Thu Jul 26 08:06:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src16_bgd.pi.gz [Thu Jul 26 08:32:54 2012] Not generating rmf since there are only 73 counts [Thu Jul 26 08:32:54 2012] rmf not generated due to insufficient counts [Thu Jul 26 08:48:35 2012] Updating aperture counts using extracted products [Thu Jul 26 08:48:35 2012] Error reading totcts from fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src16_src_b10.pi.gz [Thu Jul 26 08:48:37 2012] Calculating source flux in energy range 0.30-8.00 [Thu Jul 26 08:48:37 2012] Using photon index=1.80, rate=0.0421, arf fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src16.arf [Thu Jul 26 08:48:37 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jul 26 08:48:37 2012] Updating source flux to 1.5e-12 [Thu Jul 26 08:48:42 2012] Flag c found in src. 16 procflags, skipping spectral fitting [Thu Jul 26 08:48:42 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting [Thu Jul 26 08:49:14 2012] xmm0070340401/analysis//spectral/fullrun_pn_xmm0070340401_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete