[Mon Jun 24 01:11:23 2013] Detection parameters:
  Position = (290.5, 296.8) = 6 58 45.63 -28 59 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 247.7 +/- 21.0
  Background counts = 31.8
  Rate = 0.009 +/- 0.0007

[Mon Jun 24 01:11:23 2013] Off-axis axis estimate = 0.59'
[Mon Jun 24 01:24:06 2013] Using EEF radius (= 6.72 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 01:24:06 2013] Initial guess for spatial extent in simple fitting = 6.72"
[Mon Jun 24 01:24:06 2013] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.195
[Mon Jun 24 01:24:06 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 6.72"
[Mon Jun 24 01:31:30 2013] fullrun_pn_xmm0069750101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 24 01:31:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0069750101_pi300-10000_cl_pass0_src3.csv
[Mon Jun 24 01:31:30 2013] fullrun_pn_xmm0069750101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 24 01:31:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0069750101_pi300-10000_cl_pass0_src3.csv
[Mon Jun 24 01:31:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0069750101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0069750101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 01:31:30 2013] fullrun_pn_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 24 01:31:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 24 01:31:30 2013] fullrun_pn_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 24 01:31:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 24 01:31:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 03:49:59 2013] Source 3 is offset by -5.650973 and 4.954165 pixels which is larger than
2 X fitted extent = 0.772584 x 0.772584, not incorporating fit results
[Mon Jun 24 03:49:59 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 03:49:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 03:49:59 2013] Assessing source extent using major
[Mon Jun 24 03:49:59 2013] Source does appear to be extended
[Mon Jun 24 03:49:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 03:50:22 2013] Using EEF radius (= 6.72 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 03:50:22 2013] Initial guess for spatial extent in simple fitting = 6.72"
[Mon Jun 24 03:50:22 2013] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.195
[Mon Jun 24 03:50:22 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 6.72"
[Mon Jun 24 03:53:20 2013] fullrun_pn_xmm0069750101_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jun 24 03:53:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0069750101_pi300-10000_cl_pass1_src2.csv
[Mon Jun 24 03:53:20 2013] fullrun_pn_xmm0069750101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jun 24 03:53:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0069750101_pi300-10000_cl_pass1_src2.csv
[Mon Jun 24 03:53:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0069750101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0069750101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 03:53:20 2013] fullrun_pn_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jun 24 03:53:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jun 24 03:53:20 2013] fullrun_pn_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jun 24 03:53:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jun 24 03:53:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 05:58:27 2013] Source 3 is offset by -5.650973 and -7.407168 pixels which is larger than
2 X fitted extent = 0.772584 x 0.772584, not incorporating fit results
[Mon Jun 24 05:58:27 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 05:58:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 05:58:27 2013] Assessing source extent using major
[Mon Jun 24 05:58:27 2013] Source does appear to be extended
[Mon Jun 24 05:58:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 05:58:55 2013] XMMSAS src. selection expression = ellipse(25227.583344, 25770.794373, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 24 05:58:55 2013] Writing source region out to fullrun_pn_xmm0069750101_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 24 05:58:55 2013] Extracting stamp from image fullrun_pn_xmm0069750101_pi300-10000_cl_sm2.00.img.gz, (253, 259) - (328, 334)
[Mon Jun 24 05:58:55 2013] XMMSAS bgd. selection expression = annulus(25227.583344, 25770.794373, 1087.500000, 2175.000000, X, Y) && !ellipse(27358.416132, 27308.869000, 1480.761643, 1441.089641, 40.945873, X, Y)
[Mon Jun 24 05:58:55 2013] Writing fullrun_pn_xmm0069750101_pi300-10000_pass1_cl_src3.gif
[Mon Jun 24 06:12:09 2013] Mean detx,y = (-1665.07, 1705.10) 
[Mon Jun 24 06:12:27 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 06:12:54 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 06:12:54 2013] Setting source spectrum file to fullrun_pn_xmm0069750101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 24 06:12:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0069750101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun 24 06:16:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 24 06:16:05 2013] rmf not generated due to insufficient counts
[Mon Jun 24 07:07:55 2013] Updating aperture counts using extracted products
[Mon Jun 24 07:07:55 2013] Total counts from fullrun_pn_xmm0069750101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 430.00
[Mon Jun 24 07:07:55 2013] Total counts from fullrun_pn_xmm0069750101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1174.00
[Mon Jun 24 07:07:55 2013] Got source and background scale factors 1085684.000000, 4594185.000000
[Mon Jun 24 07:07:55 2013] User source parameters:
  Position = (290.5, 296.8) = 6 58 45.63 -28 59 36.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 152.6 +/- 21.8
  Background aperture counts = 277.4
  Rate = 0.003 +/- 0.0005

[Mon Jun 24 07:07:55 2013] Updating counts from extracted products
[Mon Jun 24 07:07:55 2013] Set source signif. to 152.56/16.66 = 9.16
[Mon Jun 24 07:07:56 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 07:07:56 2013] Using photon index=1.80, rate=0.00336, arf fullrun_pn_xmm0069750101_pi300-10000_pass1_cl_src3.arf
[Mon Jun 24 07:07:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 07:07:56 2013] Updating source flux to 1.7e-14
[Mon Jun 24 07:08:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 24 07:08:28 2013] xmm0069750101/analysis//spectral/fullrun_pn_xmm0069750101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete