[Mon Jun 24 01:12:30 2013] Detection parameters:
  Position = (324.5, 319.8) = 6 58 34.37 -28 57 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.0 +/- 12.0
  Background counts = 12.4
  Rate = 0.001 +/- 0.0003

[Mon Jun 24 01:12:31 2013] Off-axis axis estimate = 2.44'
[Mon Jun 24 02:26:40 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 02:26:40 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Mon Jun 24 02:26:40 2013] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.735
[Mon Jun 24 02:26:40 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 7.65"
[Mon Jun 24 03:49:56 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_src20.ximg exists
[Mon Jun 24 03:49:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_src20.csv
[Mon Jun 24 03:49:56 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon Jun 24 03:49:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_src20.csv
[Mon Jun 24 03:49:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 03:49:56 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon Jun 24 03:49:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon Jun 24 03:49:56 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Jun 24 03:49:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon Jun 24 03:49:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 03:50:11 2013] Source 20 is offset by 7.533724 and 5.433843 pixels which is larger than
2 X fitted extent = 2.714478 x 2.714478, not incorporating fit results
[Mon Jun 24 03:50:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 03:50:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 03:50:11 2013] Assessing source extent using major
[Mon Jun 24 03:50:11 2013] Source does appear to be extended
[Mon Jun 24 03:50:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 04:35:51 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 04:35:51 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Mon Jun 24 04:35:51 2013] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.735
[Mon Jun 24 04:35:51 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 7.65"
[Mon Jun 24 05:58:24 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_src19.ximg exists
[Mon Jun 24 05:58:24 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Jun 24 05:58:24 2013] Fit fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_src19 appears to have run properly
[Mon Jun 24 05:58:24 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Jun 24 05:58:24 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Jun 24 05:58:24 2013] Fit fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Mon Jun 24 05:58:43 2013] Source 20 is offset by 7.533724 and 5.789797 pixels which is larger than
2 X fitted extent = 2.280432 x 5.063816, not incorporating fit results
[Mon Jun 24 05:58:43 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 83.422250 pixels away
[Mon Jun 24 05:58:43 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 05:58:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 05:58:43 2013] Assessing source extent using major
[Mon Jun 24 05:58:43 2013] Source does appear to be extended
[Mon Jun 24 05:58:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 06:37:02 2013] XMMSAS src. selection expression = ellipse(28183.000000, 27770.278351, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 24 06:37:02 2013] Writing source region out to fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src20_src.reg
[Mon Jun 24 06:37:02 2013] Extracting stamp from image fullrun_mos2_xmm0069750101_pi300-10000_cl_sm2.00.img.gz, (287, 282) - (362, 357)
[Mon Jun 24 06:37:02 2013] XMMSAS bgd. selection expression = annulus(28183.000000, 27770.278351, 1087.500000, 2175.000000, X, Y) && !ellipse(27360.584440, 27298.180600, 454.512813, 410.632812, 4.595170, X, Y)
[Mon Jun 24 06:37:02 2013] Writing fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src20.gif
[Mon Jun 24 06:43:24 2013] Mean detx,y = (-552.08, 353.66) 
[Mon Jun 24 06:43:27 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 06:43:40 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 06:43:40 2013] Setting source spectrum file to fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Jun 24 06:43:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Jun 24 07:05:40 2013] Not generating rmf since there are only 48 counts
[Mon Jun 24 07:05:40 2013] rmf not generated due to insufficient counts
[Mon Jun 24 07:08:11 2013] Updating aperture counts using extracted products
[Mon Jun 24 07:08:11 2013] Total counts from fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 675.00
[Mon Jun 24 07:08:11 2013] Total counts from fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 2131.00
[Mon Jun 24 07:08:11 2013] Got source and background scale factors 1157472.000000, 10540276.000000
[Mon Jun 24 07:08:11 2013] User source parameters:
  Position = (324.5, 319.8) = 6 58 34.37 -28 57 56.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 441.0 +/- 27.0
  Background aperture counts = 234.0
  Rate = 0.01 +/- 0.0006

[Mon Jun 24 07:08:11 2013] Updating counts from extracted products
[Mon Jun 24 07:08:11 2013] Set source signif. to 440.99/15.30 = 28.83
[Mon Jun 24 07:08:15 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 07:08:15 2013] Using photon index=1.80, rate=0.00957, arf fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src20.arf
[Mon Jun 24 07:08:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 07:08:15 2013] Updating source flux to 1.3e-13
[Mon Jun 24 07:08:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 24 07:08:26 2013] xmm0069750101/analysis//spectral/fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete