[Mon Jun 24 01:12:30 2013] Detection parameters:
  Position = (508.6, 336.4) = 6 57 33.37 -28 56 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.6 +/- 7.8
  Background counts = 7.8
  Rate = 0.0008 +/- 0.0002

[Mon Jun 24 01:12:31 2013] Off-axis axis estimate = 15.48'
[Mon Jun 24 02:26:40 2013] Using EEF radius (= 14.17 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 02:26:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 24 02:26:40 2013] Initial guess for spatial extent in simple fitting = 14.17"
[Mon Jun 24 02:26:40 2013] source mask rpix=3.3, npix_max = 56, mask sum = 35, frac = 0.620
[Mon Jun 24 02:26:40 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 14.17"
[Mon Jun 24 03:49:56 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_src33.ximg exists
[Mon Jun 24 03:49:56 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_src33.csv
[Mon Jun 24 03:49:56 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Jun 24 03:49:56 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_src33.csv
[Mon Jun 24 03:49:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 03:49:56 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Jun 24 03:49:56 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon Jun 24 03:49:56 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Jun 24 03:49:56 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon Jun 24 03:49:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 03:50:11 2013] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 18.246148 pixels away
[Mon Jun 24 03:50:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 03:50:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 03:50:11 2013] Assessing source extent using major
[Mon Jun 24 03:50:11 2013] Source does appear to be extended
[Mon Jun 24 03:50:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 04:35:51 2013] Using EEF radius (= 14.17 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 04:35:51 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 24 04:35:51 2013] Initial guess for spatial extent in simple fitting = 14.17"
[Mon Jun 24 04:35:51 2013] source mask rpix=3.3, npix_max = 56, mask sum = 35, frac = 0.620
[Mon Jun 24 04:35:51 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 14.17"
[Mon Jun 24 05:58:24 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_src29.ximg exists
[Mon Jun 24 05:58:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_src29.csv
[Mon Jun 24 05:58:24 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon Jun 24 05:58:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_src29.csv
[Mon Jun 24 05:58:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 05:58:24 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon Jun 24 05:58:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Mon Jun 24 05:58:24 2013] fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Jun 24 05:58:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Mon Jun 24 05:58:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 05:58:42 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 67.344141 pixels away
[Mon Jun 24 05:58:43 2013] Spatial fit model total counts = -816.880000, observed total counts = 128.000000
[Mon Jun 24 05:58:43 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 24 05:58:43 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 05:58:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 05:58:43 2013] Assessing source extent using major
[Mon Jun 24 05:58:43 2013] Source does appear to be extended
[Mon Jun 24 05:58:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 06:37:02 2013] XMMSAS src. selection expression = ellipse(44196.830444, 29218.185303, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 24 06:37:02 2013] Writing source region out to fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src17_src.reg
[Mon Jun 24 06:37:02 2013] Extracting stamp from image fullrun_mos2_xmm0069750101_pi300-10000_cl_sm2.00.img.gz, (471, 299) - (546, 374)
[Mon Jun 24 06:37:02 2013] XMMSAS bgd. selection expression = annulus(44196.830444, 29218.185303, 1087.500000, 2175.000000, X, Y)
[Mon Jun 24 06:37:02 2013] Writing fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src17.gif
[Mon Jun 24 06:47:26 2013] Mean detx,y = (-16304.90, 4204.72) 
[Mon Jun 24 06:47:27 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 06:47:46 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 06:47:46 2013] Setting source spectrum file to fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jun 24 06:47:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Jun 24 07:07:01 2013] Not generating rmf since there are only 35 counts
[Mon Jun 24 07:07:01 2013] rmf not generated due to insufficient counts
[Mon Jun 24 07:08:14 2013] Updating aperture counts using extracted products
[Mon Jun 24 07:08:14 2013] Total counts from fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 58.00
[Mon Jun 24 07:08:14 2013] Total counts from fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 260.00
[Mon Jun 24 07:08:14 2013] Got source and background scale factors 755864.000000, 5184252.000000
[Mon Jun 24 07:08:14 2013] User source parameters:
  Position = (508.6, 336.4) = 6 57 33.37 -28 56 40.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 20.1 +/- 8.7
  Background aperture counts = 37.9
  Rate = 0.0004 +/- 0.0002

[Mon Jun 24 07:08:14 2013] Updating counts from extracted products
[Mon Jun 24 07:08:14 2013] Set source signif. to 20.09/6.16 = 3.26
[Mon Jun 24 07:08:15 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 07:08:15 2013] Using photon index=1.80, rate=0.000436, arf fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src17.arf
[Mon Jun 24 07:08:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 07:08:16 2013] Updating source flux to 3.2e-14
[Mon Jun 24 07:08:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 24 07:08:26 2013] xmm0069750101/analysis//spectral/fullrun_mos2_xmm0069750101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete