[Mon Jun 24 01:12:01 2013] Detection parameters:
  Position = (240.7, 262.3) = 6 59 2.16 -29 2 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.9 +/- 8.8
  Background counts = 10.7
  Rate = 0.001 +/- 0.0003

[Mon Jun 24 01:12:02 2013] Off-axis axis estimate = 4.94'
[Mon Jun 24 01:31:30 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 01:31:30 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Mon Jun 24 01:31:30 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.965
[Mon Jun 24 01:31:30 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 8.90"
[Mon Jun 24 02:26:39 2013] fullrun_mos1_xmm0069750101_pi300-10000_cl_pass0_src18.ximg exists
[Mon Jun 24 02:26:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0069750101_pi300-10000_cl_pass0_src18.csv
[Mon Jun 24 02:26:39 2013] fullrun_mos1_xmm0069750101_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Jun 24 02:26:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0069750101_pi300-10000_cl_pass0_src18.csv
[Mon Jun 24 02:26:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0069750101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0069750101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 02:26:40 2013] fullrun_mos1_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Jun 24 02:26:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jun 24 02:26:40 2013] fullrun_mos1_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Jun 24 02:26:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jun 24 02:26:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0069750101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 03:50:05 2013] Spatial fit model total counts = 139.082000, observed total counts = 124.000000
[Mon Jun 24 03:50:05 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 24 03:50:05 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 03:50:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 03:50:05 2013] Assessing source extent using major
[Mon Jun 24 03:50:05 2013] Source does appear to be extended
[Mon Jun 24 03:50:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 03:53:20 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 03:53:20 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Mon Jun 24 03:53:20 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.965
[Mon Jun 24 03:53:20 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 8.90"
[Mon Jun 24 04:35:51 2013] fullrun_mos1_xmm0069750101_pi300-10000_cl_pass1_src18.ximg exists
[Mon Jun 24 04:35:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0069750101_pi300-10000_cl_pass1_src18.csv
[Mon Jun 24 04:35:51 2013] fullrun_mos1_xmm0069750101_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Jun 24 04:35:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0069750101_pi300-10000_cl_pass1_src18.csv
[Mon Jun 24 04:35:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0069750101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0069750101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 04:35:51 2013] fullrun_mos1_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Jun 24 04:35:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jun 24 04:35:51 2013] fullrun_mos1_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Jun 24 04:35:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jun 24 04:35:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0069750101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 05:58:35 2013] Source 26 is offset by -3.458817 and -8.861879 pixels which is larger than
2 X fitted extent = 2.932910 x 1.022795, not incorporating fit results
[Mon Jun 24 05:58:35 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 05:58:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 05:58:35 2013] Assessing source extent using major
[Mon Jun 24 05:58:35 2013] Source does appear to be extended
[Mon Jun 24 05:58:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 06:16:18 2013] XMMSAS src. selection expression = ellipse(20892.898880, 22767.884552, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 24 06:16:18 2013] Writing source region out to fullrun_mos1_xmm0069750101_pi300-10000_pass1_cl_src26_src.reg
[Mon Jun 24 06:16:18 2013] Extracting stamp from image fullrun_mos1_xmm0069750101_pi300-10000_cl_sm2.00.img.gz, (203, 225) - (278, 300)
[Mon Jun 24 06:16:18 2013] XMMSAS bgd. selection expression = annulus(20892.898880, 22767.884552, 1087.500000, 2175.000000, X, Y) && !ellipse(19252.969589, 20288.746964, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 24 06:16:18 2013] Writing fullrun_mos1_xmm0069750101_pi300-10000_pass1_cl_src26.gif
[Mon Jun 24 06:23:05 2013] Mean detx,y = (-5256.24, -5915.65) 
[Mon Jun 24 06:23:06 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 06:23:29 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 06:23:30 2013] Setting source spectrum file to fullrun_mos1_xmm0069750101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Jun 24 06:23:30 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0069750101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Jun 24 06:35:53 2013] Not generating rmf since there are only 41 counts
[Mon Jun 24 06:35:53 2013] rmf not generated due to insufficient counts
[Mon Jun 24 07:08:00 2013] Updating aperture counts using extracted products
[Mon Jun 24 07:08:01 2013] Total counts from fullrun_mos1_xmm0069750101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 99.00
[Mon Jun 24 07:08:01 2013] Total counts from fullrun_mos1_xmm0069750101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 552.00
[Mon Jun 24 07:08:01 2013] Got source and background scale factors 1339160.000000, 10179652.000000
[Mon Jun 24 07:08:01 2013] User source parameters:
  Position = (240.7, 262.3) = 6 59 2.16 -29 2 7.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 26.4 +/- 11.0
  Background aperture counts = 72.6
  Rate = 0.0006 +/- 0.0002

[Mon Jun 24 07:08:01 2013] Updating counts from extracted products
[Mon Jun 24 07:08:01 2013] Set source signif. to 26.38/8.52 = 3.10
[Mon Jun 24 07:08:04 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 07:08:04 2013] Using photon index=1.80, rate=0.000572, arf fullrun_mos1_xmm0069750101_pi300-10000_pass1_cl_src26.arf
[Mon Jun 24 07:08:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 07:08:05 2013] Updating source flux to 1.1e-14
[Mon Jun 24 07:08:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 24 07:08:20 2013] xmm0069750101/analysis//spectral/fullrun_mos1_xmm0069750101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete