[Fri Jul 13 09:50:01 2012] Detection parameters:
  Position = (313.5, 433.0) = 19 11 6.72 0 46 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3076.7 +/- 68.7
  Background counts = 65.8
  Rate = 0.1 +/- 0.003

[Fri Jul 13 09:50:01 2012] Off-axis axis estimate = 9.82'
[Fri Jul 13 09:54:11 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 09:54:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 09:54:11 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Fri Jul 13 09:54:11 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.088
[Fri Jul 13 09:54:11 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.34"
[Fri Jul 13 11:35:59 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jul 13 11:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src2.csv
[Fri Jul 13 11:35:59 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jul 13 11:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src2.csv
[Fri Jul 13 11:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 11:36:00 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jul 13 11:36:00 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jul 13 11:36:00 2012] Fit fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jul 13 16:29:47 2012] Warning, spatial fit 2 centroid is now closest to src. 4
[Fri Jul 13 16:29:47 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.738944 pixels away
[Fri Jul 13 16:29:47 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 16:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 16:29:47 2012] Assessing source extent using major
[Fri Jul 13 16:29:47 2012] Source does appear to be extended
[Fri Jul 13 16:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 16:29:47 2012] Source is confused with source 4
[Fri Jul 13 16:30:03 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 16:30:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 16:30:03 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Fri Jul 13 16:30:03 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.088
[Fri Jul 13 16:30:03 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.34"
[Fri Jul 13 20:57:58 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 13 20:57:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src2.csv
[Fri Jul 13 20:57:58 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 13 20:57:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src2.csv
[Fri Jul 13 20:57:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 20:57:58 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 13 20:57:58 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 13 20:57:58 2012] Fit fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jul 14 00:22:36 2012] Spatial fit model total counts = 5420.040000, observed total counts = 5420.000000
[Sat Jul 14 00:22:36 2012] Offset between fit and detection position for source 2 = 1.980234 pixels
[Sat Jul 14 00:22:36 2012] 4330.390000 total counts/ 1003.640000 bgd. counts: snr = 105.010127
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.980234 pixels
  Position = (312.8, 431.1) = 19 11 6.93 0 45 56.8
  Extent = 13.1 (12.5-13.8)", rotation angle = 0
  Source counts = 3326.8 +/- 65.8
  Background counts = 1003.6
  Rate = 0.2 +/- 0.004
[Sat Jul 14 00:22:36 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 00:22:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 00:22:36 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 00:22:36 2012] Source does appear to be extended
[Sat Jul 14 00:22:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 00:22:49 2012] Counts = 3326.750000, rescaling region sizes by 2.000000
[Sat Jul 14 00:22:49 2012] XMMSAS src. selection expression = ellipse(27164.021920, 37460.658000, 1572.492045, 1572.492045, 0.000000, X, Y)
[Sat Jul 14 00:22:49 2012] Writing source region out to fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 14 00:22:49 2012] Extracting stamp from image fullrun_pn_xmm0067751001_pi300-10000_cl_sm2.00.img.gz, (222, 341) - (403, 522)
[Sat Jul 14 00:22:49 2012] XMMSAS bgd. selection expression = annulus(27164.021920, 37460.658000, 5241.640151, 10483.280302, X, Y) && !ellipse(27087.479156, 37014.989471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26898.813512, 36178.864530, 1713.672049, 463.324588, 101.940567, X, Y) && !ellipse(26679.627200, 35000.884000, 1070.792031, 1070.792031, 0.000000, X, Y) && !ellipse(26595.167694, 34663.783142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26425.503357, 33794.999146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30587.285675, 33435.301086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31777.560000, 32523.462000, 1623.240047, 1623.240047, 0.000000, X, Y) && !ellipse(26141.871400, 32389.382000, 1157.120033, 1157.120033, 0.000000, X, Y) && !ellipse(26056.644941, 32114.755937, 2058.800059, 444.664560, 102.156208, X, Y) && !ellipse(25815.877800, 30915.066000, 543.607216, 543.607216, 0.000000, X, Y) && !ellipse(25699.031200, 30262.188000, 1029.400030, 1029.400030, 0.000000, X, Y) && !ellipse(25654.872400, 30172.793360, 2058.800059, 473.744814, 102.589400, X, Y) && !ellipse(25491.104600, 29416.479000, 1215.448035, 465.402413, 97.587830, X, Y) && !ellipse(29328.735413, 28867.657715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25378.369310, 28821.138560, 1215.448035, 460.617208, 97.697802, X, Y) && !ellipse(25174.887600, 27801.996000, 1038.432030, 1038.432030, 0.000000, X, Y) && !ellipse(25143.114600, 27697.260000, 1139.480033, 412.520812, 284.393000, X, Y) && !ellipse(27402.729370, 38486.406708, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 00:22:49 2012] Writing fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src2.gif
[Sat Jul 14 00:34:51 2012] Mean detx,y = (72.48, 12921.02) 
[Sat Jul 14 00:34:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 00:38:07 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 00:38:07 2012] Setting source spectrum file to fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 14 00:38:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 14 09:47:09 2012] Updating aperture counts using extracted products
[Sat Jul 14 09:47:09 2012] Error reading totcts from fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 14 09:47:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 09:47:10 2012] Using photon index=1.80, rate=0.194, arf fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src2.arf
[Sat Jul 14 09:47:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 09:47:10 2012] Updating source flux to 8.6e-13
[Sat Jul 14 09:51:42 2012] Flag c found in src. 2 procflags, skipping spectral fitting