[Fri Jul 13 09:50:01 2012] Detection parameters:
  Position = (298.1, 359.0) = 19 11 11.20 0 40 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2528.9 +/- 64.5
  Background counts = 104.3
  Rate = 0.2 +/- 0.004

[Fri Jul 13 09:50:01 2012] Off-axis axis estimate = 4.39'
[Fri Jul 13 09:54:11 2012] Using EEF radius (= 8.62 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 09:54:11 2012] Initial guess for spatial extent in simple fitting = 8.62"
[Fri Jul 13 09:54:11 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.811
[Fri Jul 13 09:54:11 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.62"
[Fri Jul 13 11:36:00 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jul 13 11:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src13.csv
[Fri Jul 13 11:36:00 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jul 13 11:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src13.csv
[Fri Jul 13 11:36:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 11:36:00 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jul 13 11:36:00 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jul 13 11:36:00 2012] Fit fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jul 13 16:29:47 2012] Warning, spatial fit 13 centroid is now closest to src. 12
[Fri Jul 13 16:29:47 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 16:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 16:29:47 2012] Assessing source extent using major
[Fri Jul 13 16:29:47 2012] Source does appear to be extended
[Fri Jul 13 16:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 16:30:03 2012] Using EEF radius (= 8.62 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 16:30:03 2012] Initial guess for spatial extent in simple fitting = 8.62"
[Fri Jul 13 16:30:03 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.811
[Fri Jul 13 16:30:03 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 8.62"
[Fri Jul 13 20:57:58 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jul 13 20:57:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src12.csv
[Fri Jul 13 20:57:58 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jul 13 20:57:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src12.csv
[Fri Jul 13 20:57:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 20:57:59 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jul 13 20:57:59 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jul 13 20:57:59 2012] Fit fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Jul 14 00:22:36 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.975860 pixels away
[Sat Jul 14 00:22:36 2012] Spatial fit model total counts = 6944.000000, observed total counts = 6938.000000
[Sat Jul 14 00:22:36 2012] Offset between fit and detection position for source 13 = 3.194362 pixels
[Sat Jul 14 00:22:36 2012] Warning, changing simple spatial fit ID from 12 to 13
[Sat Jul 14 00:22:36 2012] 3517.661000 total counts/ 2590.250000 bgd. counts: snr = 18.222225
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 3.194362 pixels
  Position = (297.3, 355.9) = 19 11 11.42 0 40 29.5
  Extent = 6.8 (6.3-7.4)", rotation angle = 0
  Source counts = 927.4 +/- 59.3
  Background counts = 2590.2
  Rate = 0.05 +/- 0.003
[Sat Jul 14 00:22:36 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 00:22:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 00:22:36 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 00:22:36 2012] Source does appear to be extended
[Sat Jul 14 00:22:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 00:22:36 2012] Source is confused with source 12
[Sat Jul 14 00:22:36 2012] Source is confused with source 14
[Sat Jul 14 00:22:36 2012] Source is confused with source 15
[Sat Jul 14 00:22:50 2012] XMMSAS src. selection expression = ellipse(25815.877800, 30915.066000, 407.705412, 407.705412, 0.000000, X, Y)
[Sat Jul 14 00:22:50 2012] Writing source region out to fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src13_src.reg
[Sat Jul 14 00:22:50 2012] Extracting stamp from image fullrun_pn_xmm0067751001_pi300-10000_cl_sm2.00.img.gz, (274, 332) - (321, 379)
[Sat Jul 14 00:22:50 2012] XMMSAS bgd. selection expression = annulus(25815.877800, 30915.066000, 679.509020, 1359.018039, X, Y) && !ellipse(26141.871400, 32389.382000, 1157.120033, 1157.120033, 0.000000, X, Y) && !ellipse(26056.644941, 32114.755937, 2058.800059, 444.664560, 102.156208, X, Y) && !ellipse(25699.031200, 30262.188000, 1029.400030, 1029.400030, 0.000000, X, Y) && !ellipse(25654.872400, 30172.793360, 2058.800059, 473.744814, 102.589400, X, Y) && !ellipse(25491.104600, 29416.479000, 1215.448035, 465.402413, 97.587830, X, Y) && !ellipse(25378.369310, 28821.138560, 1215.448035, 460.617208, 97.697802, X, Y)
[Sat Jul 14 00:22:50 2012] Writing fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src13.gif
[Sat Jul 14 01:16:10 2012] Mean detx,y = (62.42, 6339.86) 
[Sat Jul 14 01:16:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 01:16:25 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 01:16:25 2012] Setting source spectrum file to fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jul 14 01:16:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Jul 14 09:47:09 2012] Updating aperture counts using extracted products
[Sat Jul 14 09:47:09 2012] Error reading totcts from fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jul 14 09:47:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 09:47:10 2012] Using photon index=1.80, rate=0.0541, arf fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src13.arf
[Sat Jul 14 09:47:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 09:47:10 2012] Updating source flux to 2e-13
[Sat Jul 14 09:51:42 2012] Flag c found in src. 13 procflags, skipping spectral fitting