[Fri Jul 13 09:50:01 2012] Detection parameters:
  Position = (301.5, 376.0) = 19 11 10.20 0 41 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2658.6 +/- 65.3
  Background counts = 90.6
  Rate = 0.2 +/- 0.005

[Fri Jul 13 09:50:01 2012] Off-axis axis estimate = 5.63'
[Fri Jul 13 09:54:11 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 09:54:11 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Fri Jul 13 09:54:11 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.089
[Fri Jul 13 09:54:11 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.24"
[Fri Jul 13 11:36:00 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src11.ximg exists
[Fri Jul 13 11:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src11.csv
[Fri Jul 13 11:36:00 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Jul 13 11:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src11.csv
[Fri Jul 13 11:36:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 11:36:00 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Jul 13 11:36:00 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Jul 13 11:36:00 2012] Fit fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Jul 13 16:29:47 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.939829 pixels away
[Fri Jul 13 16:29:47 2012] Spatial fit model total counts = 5423.000000, observed total counts = 5472.000000
[Fri Jul 13 16:29:47 2012] Offset between fit and detection position for source 11 = 3.176610 pixels
[Fri Jul 13 16:29:47 2012] Warning, changing simple spatial fit ID from 11 to 12
[Fri Jul 13 16:29:47 2012] 4104.230200 total counts/ 58.170200 bgd. counts: snr = 530.495910
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 3.176610 pixels
  Position = (301.0, 372.8) = 19 11 10.34 0 41 43.2
  Extent = 14.5 (14.5-14.5)", rotation angle = 0
  Source counts = 4046.1 +/- 64.1
  Background counts = 58.2
  Rate = 0.2 +/- 0.004
[Fri Jul 13 16:29:47 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 16:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 16:29:47 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 16:29:47 2012] Source does appear to be extended
[Fri Jul 13 16:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 16:29:47 2012] Source is confused with source 12
[Fri Jul 13 16:30:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 16:30:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 16:30:03 2012] Initial guess for spatial extent in simple fitting = 14.46"
[Fri Jul 13 16:30:03 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.094
[Fri Jul 13 16:30:03 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 14.46"
[Fri Jul 13 20:57:58 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src10.ximg exists
[Fri Jul 13 20:57:58 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Jul 13 20:57:58 2012] Fit fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src10 appears to have run properly
[Fri Jul 13 20:57:59 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Jul 13 20:57:59 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Jul 13 20:57:59 2012] Fit fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jul 14 00:22:36 2012] Warning, spatial fit 10 centroid is now closest to src. 8
[Sat Jul 14 00:22:36 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 00:22:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 00:22:36 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 00:22:36 2012] Source does appear to be extended
[Sat Jul 14 00:22:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 00:22:50 2012] Counts = 4046.060000, rescaling region sizes by 2.000000
[Sat Jul 14 00:22:50 2012] XMMSAS src. selection expression = ellipse(26141.871400, 32389.382000, 1735.680050, 1735.680050, 0.000000, X, Y)
[Sat Jul 14 00:22:50 2012] Writing source region out to fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src11_src.reg
[Sat Jul 14 00:22:50 2012] Extracting stamp from image fullrun_pn_xmm0067751001_pi300-10000_cl_sm2.00.img.gz, (201, 273) - (401, 473)
[Sat Jul 14 00:22:50 2012] XMMSAS bgd. selection expression = annulus(26141.871400, 32389.382000, 5785.600166, 11571.200333, X, Y) && !ellipse(24463.526600, 24439.834800, 2302.159266, 2302.159266, 0.000000, X, Y) && !ellipse(27164.021920, 37460.658000, 1048.328030, 1048.328030, 0.000000, X, Y) && !ellipse(27087.479156, 37014.989471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26898.813512, 36178.864530, 1713.672049, 463.324588, 101.940567, X, Y) && !ellipse(26679.627200, 35000.884000, 1070.792031, 1070.792031, 0.000000, X, Y) && !ellipse(26595.167694, 34663.783142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26425.503357, 33794.999146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30587.285675, 33435.301086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31777.560000, 32523.462000, 1623.240047, 1623.240047, 0.000000, X, Y) && !ellipse(26056.644941, 32114.755937, 2058.800059, 444.664560, 102.156208, X, Y) && !ellipse(25815.877800, 30915.066000, 543.607216, 543.607216, 0.000000, X, Y) && !ellipse(25699.031200, 30262.188000, 1029.400030, 1029.400030, 0.000000, X, Y) && !ellipse(25654.872400, 30172.793360, 2058.800059, 473.744814, 102.589400, X, Y) && !ellipse(25491.104600, 29416.479000, 1215.448035, 465.402413, 97.587830, X, Y) && !ellipse(29328.735413, 28867.657715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25378.369310, 28821.138560, 1215.448035, 460.617208, 97.697802, X, Y) && !ellipse(25174.887600, 27801.996000, 1038.432030, 1038.432030, 0.000000, X, Y) && !ellipse(25143.114600, 27697.260000, 1139.480033, 412.520812, 284.393000, X, Y) && !ellipse(22658.401764, 23587.853180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.084961, 23478.057098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25938.558200, 22927.935520, 391.052811, 391.052811, 0.000000, X, Y) && !ellipse(23372.923248, 23323.021973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23931.623718, 23221.374176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24943.686371, 23110.470947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24419.557037, 23205.502411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27402.729370, 38486.406708, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 00:22:50 2012] Writing fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src11.gif
[Sat Jul 14 01:01:52 2012] Mean detx,y = (64.19, 7841.04) 
[Sat Jul 14 01:01:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 01:06:17 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 01:06:17 2012] Setting source spectrum file to fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jul 14 01:06:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jul 14 09:47:09 2012] Updating aperture counts using extracted products
[Sat Jul 14 09:47:09 2012] Error reading totcts from fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jul 14 09:47:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 09:47:10 2012] Using photon index=1.80, rate=0.236, arf fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src11.arf
[Sat Jul 14 09:47:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 09:47:10 2012] Updating source flux to 6.9e-13
[Sat Jul 14 09:51:42 2012] Flag c found in src. 11 procflags, skipping spectral fitting