[Fri Jul 13 09:50:01 2012] Detection parameters:
  Position = (281.7, 281.8) = 19 11 15.93 0 35 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 618315.2 +/- 869.5
  Background counts = 222.6
  Rate = 3e+01 +/- 0.05

[Fri Jul 13 09:50:01 2012] Off-axis axis estimate = 1.71'
[Fri Jul 13 09:54:11 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 09:54:11 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jul 13 09:54:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Fri Jul 13 09:54:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Jul 13 11:35:59 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 13 11:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 11:35:59 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 13 11:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 11:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 11:36:00 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 13 11:36:00 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 13 11:36:00 2012] Fit fullrun_pn_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 13 16:29:47 2012] Spatial fit model total counts = 512742.000000, observed total counts = 531603.000000
[Fri Jul 13 16:29:47 2012] Offset between fit and detection position for source 1 = 0.310359 pixels
[Fri Jul 13 16:29:47 2012] 512996.000000 total counts/ 25600.000000 bgd. counts: snr = 3046.225000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.310359 pixels
  Position = (281.8, 281.5) = 19 11 15.93 0 35 5.8
  Extent = 9.6 (9.6-9.6)", rotation angle = 0
  Source counts = 487396.0 +/- 716.2
  Background counts = 25600.0
  Rate = 3e+01 +/- 0.04
[Fri Jul 13 16:29:47 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 16:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 16:29:47 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 16:29:47 2012] Source does appear to be extended
[Fri Jul 13 16:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 16:30:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 16:30:03 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Fri Jul 13 16:30:03 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.855
[Fri Jul 13 16:30:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.58"
[Fri Jul 13 20:57:58 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 20:57:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 20:57:58 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 20:57:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 20:57:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 20:57:58 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 20:57:58 2012] fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 20:57:58 2012] Fit fullrun_pn_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 14 00:22:36 2012] Spatial fit model total counts = 519666.000000, observed total counts = 542951.000000
[Sat Jul 14 00:22:36 2012] Offset between fit and detection position for source 1 = 0.011708 pixels
[Sat Jul 14 00:22:36 2012] 520150.000000 total counts/ 32400.000000 bgd. counts: snr = 2709.722222
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011708 pixels
  Position = (281.7, 281.5) = 19 11 15.93 0 35 5.7
  Extent = 9.6 (9.6-9.6)", rotation angle = 0
  Source counts = 487750.0 +/- 721.2
  Background counts = 32400.0
  Rate = 3e+01 +/- 0.04
[Sat Jul 14 00:22:36 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 00:22:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 00:22:36 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 00:22:36 2012] Source does appear to be extended
[Sat Jul 14 00:22:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 00:22:49 2012] Counts = 487750.000000, rescaling region sizes by 3.000000
[Sat Jul 14 00:22:49 2012] XMMSAS src. selection expression = ellipse(24463.526600, 24439.834800, 1726.619450, 1726.619450, 0.000000, X, Y)
[Sat Jul 14 00:22:49 2012] Writing source region out to fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 14 00:22:49 2012] Extracting stamp from image fullrun_pn_xmm0067751001_pi300-10000_cl_sm2.00.img.gz, (183, 182) - (381, 381)
[Sat Jul 14 00:22:49 2012] XMMSAS bgd. selection expression = annulus(24463.526600, 24439.834800, 8633.097248, 17266.194497, X, Y) && !ellipse(27164.021920, 37460.658000, 1048.328030, 1048.328030, 0.000000, X, Y) && !ellipse(27087.479156, 37014.989471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26898.813512, 36178.864530, 1713.672049, 463.324588, 101.940567, X, Y) && !ellipse(26679.627200, 35000.884000, 1070.792031, 1070.792031, 0.000000, X, Y) && !ellipse(26595.167694, 34663.783142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26425.503357, 33794.999146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30587.285675, 33435.301086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31777.560000, 32523.462000, 1623.240047, 1623.240047, 0.000000, X, Y) && !ellipse(26141.871400, 32389.382000, 1157.120033, 1157.120033, 0.000000, X, Y) && !ellipse(26056.644941, 32114.755937, 2058.800059, 444.664560, 102.156208, X, Y) && !ellipse(25815.877800, 30915.066000, 543.607216, 543.607216, 0.000000, X, Y) && !ellipse(25699.031200, 30262.188000, 1029.400030, 1029.400030, 0.000000, X, Y) && !ellipse(25654.872400, 30172.793360, 2058.800059, 473.744814, 102.589400, X, Y) && !ellipse(25491.104600, 29416.479000, 1215.448035, 465.402413, 97.587830, X, Y) && !ellipse(29328.735413, 28867.657715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25378.369310, 28821.138560, 1215.448035, 460.617208, 97.697802, X, Y) && !ellipse(25174.887600, 27801.996000, 1038.432030, 1038.432030, 0.000000, X, Y) && !ellipse(25143.114600, 27697.260000, 1139.480033, 412.520812, 284.393000, X, Y) && !ellipse(22658.401764, 23587.853180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.084961, 23478.057098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25938.558200, 22927.935520, 391.052811, 391.052811, 0.000000, X, Y) && !ellipse(23372.923248, 23323.021973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23931.623718, 23221.374176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24943.686371, 23110.470947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24419.557037, 23205.502411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27402.729370, 38486.406708, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 00:22:49 2012] Writing fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src1.gif
[Sat Jul 14 00:23:50 2012] Mean detx,y = (74.79, -230.39) 
[Sat Jul 14 00:24:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 00:34:30 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 00:34:30 2012] Setting source spectrum file to fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 00:34:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 14 09:47:09 2012] Updating aperture counts using extracted products
[Sat Jul 14 09:47:09 2012] Error reading totcts from fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 09:47:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 09:47:10 2012] Using photon index=1.80, rate=28.4, arf fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 09:47:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 09:47:10 2012] Updating source flux to 6.2e-11
[Sat Jul 14 09:54:13 2012] Reading fit data from xmm0067751001/analysis//spectral/fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 14 09:54:13 2012] Spectral fit parameter nH value = 4.08654e+21
[Sat Jul 14 09:54:13 2012] Spectral fit parameter PhoIndex value = 1.7244
[Sat Jul 14 09:54:13 2012] Failed to get F(0.3-8.0) from xmm0067751001/analysis//spectral/fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 09:54:13 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 09:54:13 2012] Using Nh = 4.1e+21, photon index=1.72, rate=28.4, arf fullrun_pn_xmm0067751001_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 09:54:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 09:54:13 2012] Updating source flux to 1.1e-10