[Fri Jul 13 09:50:31 2012] Detection parameters:
  Position = (268.0, 267.1) = 19 11 19.91 0 34 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 530.8 +/- 33.2
  Background counts = 65.9
  Rate = 0.03 +/- 0.002

[Fri Jul 13 09:50:32 2012] Off-axis axis estimate = 3.16'
[Fri Jul 13 12:33:19 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:33:19 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Fri Jul 13 12:33:19 2012] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.638
[Fri Jul 13 12:33:19 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.01"
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src6.csv
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src6.csv
[Fri Jul 13 16:29:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jul 13 16:29:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 16:29:55 2012] Source 6 is offset by 7.326124 and 6.456328 pixels which is larger than
2 X fitted extent = 0.920708 x 0.920708, not incorporating fit results
[Fri Jul 13 16:29:55 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 16:29:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 16:29:55 2012] Assessing source extent using major
[Fri Jul 13 16:29:55 2012] Source does appear to be extended
[Fri Jul 13 16:29:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:24:18 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 22:24:18 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Fri Jul 13 22:24:18 2012] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.638
[Fri Jul 13 22:24:18 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 8.01"
[Sat Jul 14 00:22:28 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jul 14 00:22:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src6.csv
[Sat Jul 14 00:22:28 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jul 14 00:22:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src6.csv
[Sat Jul 14 00:22:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 00:22:29 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jul 14 00:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jul 14 00:22:29 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jul 14 00:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jul 14 00:22:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 00:22:41 2012] Source 6 is offset by -4.697094 and 6.388029 pixels which is larger than
2 X fitted extent = 2.469986 x 2.469986, not incorporating fit results
[Sat Jul 14 00:22:41 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 00:22:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 00:22:41 2012] Assessing source extent using major
[Sat Jul 14 00:22:41 2012] Source does appear to be extended
[Sat Jul 14 00:22:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 08:17:09 2012] XMMSAS src. selection expression = ellipse(23270.510803, 23193.010498, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 08:17:09 2012] Writing source region out to fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src6_src.reg
[Sat Jul 14 08:17:09 2012] Extracting stamp from image fullrun_mos2_xmm0067751001_pi300-10000_cl_sm2.00.img.gz, (231, 230) - (306, 305)
[Sat Jul 14 08:17:10 2012] XMMSAS bgd. selection expression = annulus(23270.510803, 23193.010498, 1087.500000, 2175.000000, X, Y) && !ellipse(24478.316080, 24446.777800, 2731.272079, 2731.272079, 0.000000, X, Y) && !ellipse(23566.485504, 24844.295349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23167.286000, 24292.662200, 931.584027, 931.584027, 0.000000, X, Y) && !ellipse(23726.188171, 25280.954742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26530.174000, 22301.812000, 1235.376036, 1235.376036, 0.000000, X, Y)
[Sat Jul 14 08:17:10 2012] Writing fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src6.gif
[Sat Jul 14 08:37:59 2012] Mean detx,y = (-770.20, 1481.99) 
[Sat Jul 14 08:38:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 08:38:08 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 08:38:09 2012] Setting source spectrum file to fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jul 14 08:38:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jul 14 09:08:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 09:08:59 2012] rmf not generated due to insufficient counts
[Sat Jul 14 09:47:11 2012] Updating aperture counts using extracted products
[Sat Jul 14 09:47:11 2012] Error reading totcts from fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jul 14 09:47:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 09:47:11 2012] Using photon index=1.80, rate=0.0271, arf fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src6.arf
[Sat Jul 14 09:47:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 09:47:11 2012] Updating source flux to 2.8e-13
[Sat Jul 14 09:49:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting