[Fri Jul 13 09:50:31 2012] Detection parameters:
  Position = (270.2, 277.0) = 19 11 19.27 0 34 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1931.4 +/- 59.8
  Background counts = 71.3
  Rate = 0.1 +/- 0.003

[Fri Jul 13 09:50:32 2012] Off-axis axis estimate = 2.57'
[Fri Jul 13 12:33:19 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:33:19 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Fri Jul 13 12:33:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.726
[Fri Jul 13 12:33:19 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.71"
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src3.csv
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src3.csv
[Fri Jul 13 16:29:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jul 13 16:29:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 16:29:55 2012] Source 2 is offset by -6.542082 and 5.764159 pixels which is larger than
2 X fitted extent = 2.200000 x 2.200000, not incorporating fit results
[Fri Jul 13 16:29:55 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 16:29:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 16:29:55 2012] Assessing source extent using major
[Fri Jul 13 16:29:55 2012] Source does appear to be extended
[Fri Jul 13 16:29:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:24:18 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 22:24:18 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Fri Jul 13 22:24:18 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.726
[Fri Jul 13 22:24:18 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.71"
[Sat Jul 14 00:22:28 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jul 14 00:22:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src3.csv
[Sat Jul 14 00:22:28 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jul 14 00:22:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src3.csv
[Sat Jul 14 00:22:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 00:22:29 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jul 14 00:22:29 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jul 14 00:22:29 2012] Fit fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jul 14 00:22:41 2012] Spatial fit model total counts = 16477.200000, observed total counts = 16334.000000
[Sat Jul 14 00:22:41 2012] Offset between fit and detection position for source 2 = 4.402810 pixels
[Sat Jul 14 00:22:41 2012] 19188.960000 total counts/ 14077.000000 bgd. counts: snr = 43.085624
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.402810 pixels
  Position = (266.8, 279.8) = 19 11 20.25 0 34 58.4
  Extent = 11.6 (11.6-11.6)", rotation angle = 0
  Source counts = 5112.0 +/- 138.5
  Background counts = 14077.0
  Rate = 0.2 +/- 0.006
[Sat Jul 14 00:22:41 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 00:22:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 00:22:41 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 00:22:41 2012] Source does appear to be extended
[Sat Jul 14 00:22:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 00:22:41 2012] Source is confused with source 3
[Sat Jul 14 08:17:09 2012] Counts = 5111.960000, rescaling region sizes by 2.000000
[Sat Jul 14 08:17:09 2012] XMMSAS src. selection expression = ellipse(23167.286000, 24292.662200, 1397.376040, 1397.376040, 0.000000, X, Y)
[Sat Jul 14 08:17:09 2012] Writing source region out to fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 14 08:17:09 2012] Extracting stamp from image fullrun_mos2_xmm0067751001_pi300-10000_cl_sm2.00.img.gz, (187, 199) - (347, 360)
[Sat Jul 14 08:17:09 2012] XMMSAS bgd. selection expression = annulus(23167.286000, 24292.662200, 4657.920134, 9315.840268, X, Y) && !ellipse(24478.316080, 24446.777800, 2731.272079, 2731.272079, 0.000000, X, Y) && !ellipse(23566.485504, 24844.295349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23726.188171, 25280.954742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.664000, 26310.256000, 613.478418, 613.478418, 0.000000, X, Y) && !ellipse(23270.510803, 23193.010498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26323.494476, 23673.730103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23501.557600, 26866.182000, 1034.792030, 1034.792030, 0.000000, X, Y) && !ellipse(26530.174000, 22301.812000, 1235.376036, 1235.376036, 0.000000, X, Y) && !ellipse(24758.405151, 27512.440491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23093.419000, 19776.344000, 1218.248035, 1218.248035, 0.000000, X, Y) && !ellipse(25877.419000, 30564.344000, 1218.248035, 1218.248035, 0.000000, X, Y) && !ellipse(31800.374000, 32730.642000, 1625.664047, 1625.664047, 0.000000, X, Y) && !ellipse(25427.139800, 28895.306000, 1133.184033, 1133.184033, 0.000000, X, Y) && !ellipse(25458.875400, 29344.008000, 1276.216037, 685.394420, 112.241700, X, Y)
[Sat Jul 14 08:17:09 2012] Writing fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src2.gif
[Sat Jul 14 08:31:01 2012] Mean detx,y = (-189.74, 196.49) 
[Sat Jul 14 08:31:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 08:34:28 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 08:34:28 2012] Setting source spectrum file to fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 14 08:34:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 14 09:47:11 2012] Updating aperture counts using extracted products
[Sat Jul 14 09:47:11 2012] Error reading totcts from fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 14 09:47:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 09:47:11 2012] Using photon index=1.80, rate=0.231, arf fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src2.arf
[Sat Jul 14 09:47:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 09:47:11 2012] Updating source flux to 2e-12
[Sat Jul 14 09:49:37 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Sat Jul 14 09:49:37 2012] Flag c found in src. 2 procflags, skipping spectral fitting