[Fri Jul 13 09:50:31 2012] Detection parameters:
  Position = (294.8, 341.0) = 19 11 12.15 0 39 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.3 +/- 15.4
  Background counts = 54.1
  Rate = 0.004 +/- 0.0008

[Fri Jul 13 09:50:32 2012] Off-axis axis estimate = 3.10'
[Fri Jul 13 12:33:19 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:33:19 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Fri Jul 13 12:33:19 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.918
[Fri Jul 13 12:33:19 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.98"
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src20.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src20.csv
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src20.csv
[Fri Jul 13 16:29:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 16:29:41 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Jul 13 16:29:41 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Jul 13 16:29:41 2012] Fit fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Jul 13 16:29:55 2012] Warning, spatial fit 20 centroid is now closest to src. 10
[Fri Jul 13 16:29:55 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 16:29:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 16:29:55 2012] Assessing source extent using major
[Fri Jul 13 16:29:55 2012] Source does appear to be extended
[Fri Jul 13 16:29:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 16:29:55 2012] Source is confused with source 10
[Fri Jul 13 22:24:18 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 22:24:18 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Fri Jul 13 22:24:18 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.918
[Fri Jul 13 22:24:18 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.98"
[Sat Jul 14 00:22:29 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src20.ximg exists
[Sat Jul 14 00:22:29 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Jul 14 00:22:29 2012] Fit fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src20 appears to have run properly
[Sat Jul 14 00:22:29 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Jul 14 00:22:29 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Jul 14 00:22:29 2012] Fit fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Jul 14 00:22:41 2012] Spatial fit model total counts = 790.755000, observed total counts = 736.000000
[Sat Jul 14 00:22:41 2012] Offset between fit and detection position for source 11 = 3.947330 pixels
[Sat Jul 14 00:22:41 2012] Warning, changing simple spatial fit ID from 20 to 19
[Sat Jul 14 00:22:41 2012] 686.461000 total counts/ 545.500000 bgd. counts: snr = 6.035338
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 3.947330 pixels
  Position = (293.3, 337.3) = 19 11 12.58 0 39 8.7
  Extent = 16.0" x 8.7", rotation angle = 107
  Source counts = 141.0 +/- 26.2
  Background counts = 545.5
  Rate = 0.006 +/- 0.001
[Sat Jul 14 00:22:41 2012] Spatial fit model total counts = 657.383000, observed total counts = 649.000000
[Sat Jul 14 00:22:41 2012] Offset between fit and detection position for source 11 = 0.531193 pixels
[Sat Jul 14 00:22:41 2012] Warning, changing simple spatial fit ID from 19 to 20
[Sat Jul 14 00:22:41 2012] 662.819000 total counts/ 502.766000 bgd. counts: snr = 7.138071
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.531193 pixels
  Position = (293.2, 337.8) = 19 11 12.61 0 39 10.9
  Extent = 16.0 (15.9-31.9)" x 8.6 (6.3-12.9)", rotation angle = 112 (100-129) degrees
  Source counts = 160.1 +/- 25.7
  Background counts = 502.8
  Rate = 0.007 +/- 0.001
[Sat Jul 14 00:22:41 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 00:22:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 00:22:41 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 00:22:41 2012] Source does appear to be extended
[Sat Jul 14 00:22:41 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Sat Jul 14 08:17:10 2012] XMMSAS src. selection expression = ellipse(25458.875400, 29344.008000, 957.162028, 514.045815, 112.241700, X, Y)
[Sat Jul 14 08:17:10 2012] Writing source region out to fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src11_src.reg
[Sat Jul 14 08:17:10 2012] Extracting stamp from image fullrun_mos2_xmm0067751001_pi300-10000_cl_sm2.00.img.gz, (238, 283) - (348, 393)
[Sat Jul 14 08:17:10 2012] XMMSAS bgd. selection expression = annulus(25458.875400, 29344.008000, 1595.270046, 3190.540092, X, Y) && !ellipse(24478.316080, 24446.777800, 2731.272079, 2731.272079, 0.000000, X, Y) && !ellipse(23720.664000, 26310.256000, 613.478418, 613.478418, 0.000000, X, Y) && !ellipse(23501.557600, 26866.182000, 1034.792030, 1034.792030, 0.000000, X, Y) && !ellipse(24758.405151, 27512.440491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25877.419000, 30564.344000, 1218.248035, 1218.248035, 0.000000, X, Y) && !ellipse(25427.139800, 28895.306000, 1133.184033, 1133.184033, 0.000000, X, Y)
[Sat Jul 14 08:17:10 2012] Writing fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src11.gif
[Sat Jul 14 08:41:34 2012] Mean detx,y = (49.85, -4809.21) 
[Sat Jul 14 08:41:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 08:42:00 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 08:42:00 2012] Setting source spectrum file to fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jul 14 08:42:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jul 14 09:47:11 2012] Updating aperture counts using extracted products
[Sat Jul 14 09:47:11 2012] Error reading totcts from fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jul 14 09:47:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 09:47:11 2012] Using photon index=1.80, rate=0.00723, arf fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src11.arf
[Sat Jul 14 09:47:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 09:47:11 2012] Updating source flux to 8.1e-14
[Sat Jul 14 09:49:37 2012] Flag c found in src. 11 procflags, skipping spectral fitting