[Fri Jul 13 09:50:31 2012] Detection parameters:
  Position = (281.9, 281.9) = 19 11 15.89 0 35 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144666.9 +/- 444.1
  Background counts = 76.1
  Rate = 6 +/- 0.02

[Fri Jul 13 09:50:32 2012] Off-axis axis estimate = 1.70'
[Fri Jul 13 12:33:19 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 12:33:19 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jul 13 12:33:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Fri Jul 13 12:33:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 16:29:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 13 16:29:40 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 13 16:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 13 16:29:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 16:29:55 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri Jul 13 16:29:55 2012] Source 1 is offset by 3.980232 and -0.797771 pixels which is larger than
2 X fitted extent = 3.952750 x 3.952750, not incorporating fit results
[Fri Jul 13 16:29:55 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 16:29:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 16:29:55 2012] Assessing source extent using major
[Fri Jul 13 16:29:55 2012] Source does appear to be extended
[Fri Jul 13 16:29:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:24:18 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 22:24:18 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jul 13 22:24:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Fri Jul 13 22:24:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Sat Jul 14 00:22:28 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 14 00:22:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 00:22:28 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 14 00:22:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 00:22:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 00:22:29 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 14 00:22:29 2012] fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 14 00:22:29 2012] Fit fullrun_mos2_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 14 00:22:41 2012] Spatial fit model total counts = 179560.000000, observed total counts = 177811.000000
[Sat Jul 14 00:22:41 2012] Offset between fit and detection position for source 1 = 0.338890 pixels
[Sat Jul 14 00:22:41 2012] 178477.000000 total counts/ 25600.000000 bgd. counts: snr = 955.481250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.338890 pixels
  Position = (281.9, 281.6) = 19 11 15.88 0 35 6.1
  Extent = 11.4 (11.3-11.4)", rotation angle = 0
  Source counts = 152877.0 +/- 422.5
  Background counts = 25600.0
  Rate = 7 +/- 0.02
[Sat Jul 14 00:22:41 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 00:22:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 00:22:41 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 00:22:41 2012] Source does appear to be extended
[Sat Jul 14 00:22:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 08:17:09 2012] Counts = 152877.000000, rescaling region sizes by 3.000000
[Sat Jul 14 08:17:09 2012] XMMSAS src. selection expression = ellipse(24478.316080, 24446.777800, 2048.454059, 2048.454059, 0.000000, X, Y)
[Sat Jul 14 08:17:09 2012] Writing source region out to fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 14 08:17:09 2012] Extracting stamp from image fullrun_mos2_xmm0067751001_pi300-10000_cl_sm2.00.img.gz, (164, 164) - (400, 399)
[Sat Jul 14 08:17:09 2012] XMMSAS bgd. selection expression = annulus(24478.316080, 24446.777800, 10242.270295, 20484.540589, X, Y) && !ellipse(23566.485504, 24844.295349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23167.286000, 24292.662200, 931.584027, 931.584027, 0.000000, X, Y) && !ellipse(23726.188171, 25280.954742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.664000, 26310.256000, 613.478418, 613.478418, 0.000000, X, Y) && !ellipse(23270.510803, 23193.010498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26323.494476, 23673.730103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23501.557600, 26866.182000, 1034.792030, 1034.792030, 0.000000, X, Y) && !ellipse(26530.174000, 22301.812000, 1235.376036, 1235.376036, 0.000000, X, Y) && !ellipse(24758.405151, 27512.440491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23093.419000, 19776.344000, 1218.248035, 1218.248035, 0.000000, X, Y) && !ellipse(25877.419000, 30564.344000, 1218.248035, 1218.248035, 0.000000, X, Y) && !ellipse(31800.374000, 32730.642000, 1625.664047, 1625.664047, 0.000000, X, Y) && !ellipse(25427.139800, 28895.306000, 1133.184033, 1133.184033, 0.000000, X, Y) && !ellipse(25458.875400, 29344.008000, 1276.216037, 685.394420, 112.241700, X, Y)
[Sat Jul 14 08:17:09 2012] Writing fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src1.gif
[Sat Jul 14 08:17:25 2012] Mean detx,y = (105.90, 83.28) 
[Sat Jul 14 08:17:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 08:27:45 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 08:27:45 2012] Setting source spectrum file to fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 08:27:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 14 09:47:10 2012] Updating aperture counts using extracted products
[Sat Jul 14 09:47:11 2012] Error reading totcts from fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 14 09:47:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 09:47:11 2012] Using photon index=1.80, rate=6.91, arf fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 09:47:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 09:47:11 2012] Updating source flux to 5.8e-11
[Sat Jul 14 09:49:37 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Sat Jul 14 09:51:42 2012] Reading fit data from xmm0067751001/analysis//spectral/fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 14 09:51:42 2012] Spectral fit parameter nH value = 6.21016e+21
[Sat Jul 14 09:51:42 2012] Spectral fit parameter PhoIndex value = 1.94653
[Sat Jul 14 09:51:42 2012] Failed to get F(0.3-8.0) from xmm0067751001/analysis//spectral/fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 09:51:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 09:51:42 2012] Using Nh = 6.2e+21, photon index=1.95, rate=6.91, arf fullrun_mos2_xmm0067751001_pi300-10000_pass1_cl_src1.arf
[Sat Jul 14 09:51:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 09:51:42 2012] Updating source flux to 8.1e-11