[Fri Jul 13 09:50:16 2012] Detection parameters:
  Position = (281.0, 265.1) = 19 11 16.15 0 33 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 770.3 +/- 44.3
  Background counts = 63.0
  Rate = 0.04 +/- 0.002

[Fri Jul 13 09:50:16 2012] Off-axis axis estimate = 2.73'
[Fri Jul 13 11:36:01 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 11:36:01 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Fri Jul 13 11:36:01 2012] source mask rpix=1.8, npix_max = 21, mask sum = 8, frac = 0.381
[Fri Jul 13 11:36:01 2012] Skipping simple spatial due to low active detector fraction
[Fri Jul 13 16:29:51 2012] Spatial fit model total counts = 3360.960000, observed total counts = 3326.000000
[Fri Jul 13 16:29:51 2012] Offset between fit and detection position for source 5 = 3.913853 pixels
[Fri Jul 13 16:29:51 2012] Warning, changing simple spatial fit ID from -1 to 7
[Fri Jul 13 16:29:51 2012] 3448.291000 total counts/ 2928.920000 bgd. counts: snr = 9.596745
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 3.913853 pixels
  Position = (278.8, 268.3) = 19 11 16.79 0 34 8.4
  Extent = 9.6 (8.4-10.7)", rotation angle = 0
  Source counts = 519.4 +/- 58.7
  Background counts = 2928.9
  Rate = 0.02 +/- 0.003
[Fri Jul 13 16:29:51 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 16:29:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 16:29:51 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 16:29:51 2012] Source does appear to be extended
[Fri Jul 13 16:29:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 20:57:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 20:57:59 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Fri Jul 13 20:57:59 2012] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.824
[Fri Jul 13 20:57:59 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.56"
[Fri Jul 13 22:24:18 2012] fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 13 22:24:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_src2.csv
[Fri Jul 13 22:24:18 2012] fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 13 22:24:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_src2.csv
[Fri Jul 13 22:24:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:24:18 2012] fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 13 22:24:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jul 13 22:24:18 2012] fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 13 22:24:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jul 13 22:24:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 00:22:38 2012] Spatial fit model total counts = 14042.700000, observed total counts = 16760.000000
[Sat Jul 14 00:22:38 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 14 00:22:38 2012] Source 5 is offset by -8.223055 and -2.512690 pixels which is larger than
2 X fitted extent = 2.978032 x 2.978032, not incorporating fit results
[Sat Jul 14 00:22:38 2012] Spatial fit model total counts = 3364.370000, observed total counts = 3326.000000
[Sat Jul 14 00:22:38 2012] Offset between fit and detection position for source 5 = 0.026943 pixels
[Sat Jul 14 00:22:38 2012] Warning, changing simple spatial fit ID from 2 to 8
[Sat Jul 14 00:22:38 2012] 3401.996000 total counts/ 2888.730000 bgd. counts: snr = 9.549684
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.026943 pixels
  Position = (278.7, 268.3) = 19 11 16.80 0 34 8.4
  Extent = 9.5 (8.4-10.7)", rotation angle = 0
  Source counts = 513.3 +/- 58.3
  Background counts = 2888.7
  Rate = 0.02 +/- 0.003
[Sat Jul 14 00:22:38 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 00:22:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 00:22:38 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 00:22:38 2012] Source does appear to be extended
[Sat Jul 14 00:22:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 06:24:02 2012] XMMSAS src. selection expression = ellipse(24202.544200, 23293.348000, 568.965616, 568.965616, 0.000000, X, Y)
[Sat Jul 14 06:24:02 2012] Writing source region out to fullrun_mos1_xmm0067751001_pi300-10000_pass1_cl_src5_src.reg
[Sat Jul 14 06:24:02 2012] Extracting stamp from image fullrun_mos1_xmm0067751001_pi300-10000_cl_sm2.00.img.gz, (246, 236) - (311, 301)
[Sat Jul 14 06:24:02 2012] XMMSAS bgd. selection expression = annulus(24202.544200, 23293.348000, 948.276027, 1896.552055, X, Y) && !ellipse(24476.103600, 24452.771800, 2716.440078, 2716.440078, 0.000000, X, Y) && !ellipse(25146.451200, 22848.626000, 1266.616036, 228.936807, 70.208000, X, Y) && !ellipse(22430.758000, 22493.182000, 1306.392038, 1306.392038, 0.000000, X, Y) && !ellipse(23790.507934, 22230.344000, 1285.040037, 1285.040037, 0.000000, X, Y) && !ellipse(25279.279419, 22401.915314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24433.822510, 22616.067322, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 06:24:02 2012] Writing fullrun_mos1_xmm0067751001_pi300-10000_pass1_cl_src5.gif
[Sat Jul 14 06:34:55 2012] Mean detx,y = (1321.41, -206.52) 
[Sat Jul 14 06:34:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 06:35:06 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 06:35:06 2012] Setting source spectrum file to fullrun_mos1_xmm0067751001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jul 14 06:35:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0067751001_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jul 14 09:47:10 2012] Updating aperture counts using extracted products
[Sat Jul 14 09:47:10 2012] Error reading totcts from fullrun_mos1_xmm0067751001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jul 14 09:47:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 09:47:10 2012] Using photon index=1.80, rate=0.0234, arf fullrun_mos1_xmm0067751001_pi300-10000_pass1_cl_src5.arf
[Sat Jul 14 09:47:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 09:47:10 2012] Updating source flux to 2.4e-13
[Sat Jul 14 09:47:12 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Sat Jul 14 09:47:12 2012] Flag p found in src. 5 procflags, skipping spectral fitting