[Fri Jul 13 09:50:16 2012] Detection parameters:
  Position = (265.0, 264.1) = 19 11 20.78 0 33 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 375.0 +/- 28.6
  Background counts = 72.8
  Rate = 0.02 +/- 0.001

[Fri Jul 13 09:50:16 2012] Off-axis axis estimate = 3.47'
[Fri Jul 13 11:36:01 2012] Using EEF radius (= 8.16 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 11:36:01 2012] Initial guess for spatial extent in simple fitting = 8.16"
[Fri Jul 13 11:36:01 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.708
[Fri Jul 13 11:36:01 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.16"
[Fri Jul 13 12:33:19 2012] fullrun_mos1_xmm0067751001_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jul 13 12:33:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0067751001_pi300-10000_cl_pass0_src2.csv
[Fri Jul 13 12:33:19 2012] fullrun_mos1_xmm0067751001_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jul 13 12:33:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0067751001_pi300-10000_cl_pass0_src2.csv
[Fri Jul 13 12:33:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067751001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067751001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 12:33:19 2012] fullrun_mos1_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jul 13 12:33:19 2012] fullrun_mos1_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jul 13 12:33:19 2012] Fit fullrun_mos1_xmm0067751001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jul 13 16:29:51 2012] Spatial fit model total counts = 2943.330000, observed total counts = 2855.000000
[Fri Jul 13 16:29:51 2012] Offset between fit and detection position for source 4 = 8.321991 pixels
[Fri Jul 13 16:29:51 2012] 3319.333000 total counts/ 2614.250000 bgd. counts: snr = 13.790077
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 8.321991 pixels
  Position = (258.4, 259.1) = 19 11 22.71 0 33 28.4
  Extent = 16.3 (16.3-32.7)", rotation angle = 0
  Source counts = 705.1 +/- 57.6
  Background counts = 2614.2
  Rate = 0.03 +/- 0.003
[Fri Jul 13 16:29:51 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 16:29:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 16:29:51 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 16:29:51 2012] Source does appear to be extended
[Fri Jul 13 16:29:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 20:57:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 20:57:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 13 20:57:59 2012] Initial guess for spatial extent in simple fitting = 16.33"
[Fri Jul 13 20:57:59 2012] source mask rpix=3.8, npix_max = 72, mask sum = 72, frac = 0.995
[Fri Jul 13 20:57:59 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 16.33"
[Fri Jul 13 22:24:18 2012] fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jul 13 22:24:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_src4.csv
[Fri Jul 13 22:24:18 2012] fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jul 13 22:24:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_src4.csv
[Fri Jul 13 22:24:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:24:18 2012] fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jul 13 22:24:18 2012] fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jul 13 22:24:18 2012] Fit fullrun_mos1_xmm0067751001_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Jul 14 00:22:38 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.411831 pixels away
[Sat Jul 14 00:22:38 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 17.771050 pixels away
[Sat Jul 14 00:22:38 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 00:22:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 00:22:38 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 00:22:38 2012] Source does appear to be extended
[Sat Jul 14 00:22:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 06:24:02 2012] XMMSAS src. selection expression = ellipse(22430.758000, 22493.182000, 979.794028, 979.794028, 0.000000, X, Y)
[Sat Jul 14 06:24:02 2012] Writing source region out to fullrun_mos1_xmm0067751001_pi300-10000_pass1_cl_src4_src.reg
[Sat Jul 14 06:24:02 2012] Extracting stamp from image fullrun_mos1_xmm0067751001_pi300-10000_cl_sm2.00.img.gz, (202, 203) - (315, 315)
[Sat Jul 14 06:24:02 2012] XMMSAS bgd. selection expression = annulus(22430.758000, 22493.182000, 1632.990047, 3265.980094, X, Y) && !ellipse(24476.103600, 24452.771800, 2716.440078, 2716.440078, 0.000000, X, Y) && !ellipse(24202.544200, 23293.348000, 758.620822, 758.620822, 0.000000, X, Y) && !ellipse(25146.451200, 22848.626000, 1266.616036, 228.936807, 70.208000, X, Y) && !ellipse(23790.507934, 22230.344000, 1285.040037, 1285.040037, 0.000000, X, Y) && !ellipse(25279.279419, 22401.915314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24433.822510, 22616.067322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19201.210000, 25593.256000, 1447.520042, 1447.520042, 0.000000, X, Y)
[Sat Jul 14 06:24:02 2012] Writing fullrun_mos1_xmm0067751001_pi300-10000_pass1_cl_src4.gif
[Sat Jul 14 06:35:29 2012] Mean detx,y = (2503.79, 1231.04) 
[Sat Jul 14 06:35:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 06:35:43 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 06:35:43 2012] Setting source spectrum file to fullrun_mos1_xmm0067751001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jul 14 06:35:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0067751001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jul 14 09:47:10 2012] Updating aperture counts using extracted products
[Sat Jul 14 09:47:10 2012] Error reading totcts from fullrun_mos1_xmm0067751001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jul 14 09:47:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 09:47:10 2012] Using photon index=1.80, rate=0.0321, arf fullrun_mos1_xmm0067751001_pi300-10000_pass1_cl_src4.arf
[Sat Jul 14 09:47:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 09:47:10 2012] Updating source flux to 3e-13