[Fri Jun 21 12:23:18 2013] Detection parameters:
  Position = (309.8, 443.9) = 19 11 8.12 0 46 57.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 440.4 +/- 28.2
  Background counts = 59.5
  Rate = 0.06 +/- 0.004

[Fri Jun 21 12:23:18 2013] Off-axis axis estimate = 10.58'
[Fri Jun 21 12:26:46 2013] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 12:26:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 12:26:46 2013] Initial guess for spatial extent in simple fitting = 11.72"
[Fri Jun 21 12:26:46 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.882
[Fri Jun 21 12:26:46 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 11.72"
[Fri Jun 21 13:52:40 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_src26.ximg exists
[Fri Jun 21 13:52:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_src26.csv
[Fri Jun 21 13:52:40 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri Jun 21 13:52:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_src26.csv
[Fri Jun 21 13:52:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 13:52:41 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri Jun 21 13:52:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Jun 21 13:52:41 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Jun 21 13:52:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Jun 21 13:52:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 16:55:31 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 11.683249 pixels away
[Fri Jun 21 16:55:31 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 15.877228 pixels away
[Fri Jun 21 16:55:31 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 16:55:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 16:55:31 2013] Assessing source extent using major
[Fri Jun 21 16:55:31 2013] Source does appear to be extended
[Fri Jun 21 16:55:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 16:55:55 2013] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 16:55:55 2013] Initial guess for spatial extent in simple fitting = 11.72"
[Fri Jun 21 16:55:55 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.882
[Fri Jun 21 16:55:55 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 11.72"
[Fri Jun 21 18:44:57 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_src26.ximg exists
[Fri Jun 21 18:44:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_src26.csv
[Fri Jun 21 18:44:57 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Jun 21 18:44:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_src26.csv
[Fri Jun 21 18:44:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 18:44:57 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Jun 21 18:44:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Jun 21 18:44:57 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Jun 21 18:44:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Jun 21 18:44:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 21:20:38 2013] Source 26 is offset by -8.578195 and -0.478769 pixels which is larger than
2 X fitted extent = 1.301177 x 1.301177, not incorporating fit results
[Fri Jun 21 21:20:38 2013] Source 26 is offset by -7.372770 and 5.726657 pixels which is larger than
2 X fitted extent = 1.275499 x 1.275499, not incorporating fit results
[Fri Jun 21 21:20:38 2013] Warning, spatial fit 26 centroid is now closest to src. 2
[Fri Jun 21 21:20:38 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 21:20:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 21:20:38 2013] Assessing source extent using major
[Fri Jun 21 21:20:38 2013] Source does appear to be extended
[Fri Jun 21 21:20:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 21:20:51 2013] XMMSAS src. selection expression = ellipse(26906.815033, 38573.465118, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 21:20:51 2013] Writing source region out to fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src26_src.reg
[Fri Jun 21 21:20:51 2013] Extracting stamp from image fullrun_pn_xmm0067750801_pi300-10000_cl_sm2.00.img.gz, (272, 406) - (347, 481)
[Fri Jun 21 21:20:51 2013] XMMSAS bgd. selection expression = annulus(26906.815033, 38573.465118, 1087.500000, 2175.000000, X, Y) && !ellipse(26762.819519, 37624.855011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26651.650787, 37095.097015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26549.382000, 36512.166200, 1735.112050, 406.419212, 281.566100, X, Y) && !ellipse(26474.483337, 36054.665375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26380.339140, 35537.408000, 1670.744048, 420.788812, 102.249600, X, Y) && !ellipse(26281.530600, 34961.066200, 1635.384047, 341.304810, 99.606170, X, Y)
[Fri Jun 21 21:20:51 2013] Writing fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src26.gif
[Fri Jun 21 21:50:22 2013] Mean detx,y = (58.06, 13948.20) 
[Fri Jun 21 21:50:25 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 21:50:49 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 21:50:50 2013] Setting source spectrum file to fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Jun 21 21:50:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri Jun 21 22:45:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 22:45:19 2013] rmf not generated due to insufficient counts
[Sat Jun 22 00:29:54 2013] Updating aperture counts using extracted products
[Sat Jun 22 00:29:54 2013] Total counts from fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 544.00
[Sat Jun 22 00:29:54 2013] Total counts from fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src26_bgd.pi.gz = 672.00
[Sat Jun 22 00:29:54 2013] Got source and background scale factors 910893.000000, 2037223.000000
[Sat Jun 22 00:29:54 2013] User source parameters:
  Position = (309.8, 443.9) = 19 11 8.12 0 46 57.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 243.5 +/- 24.3
  Background aperture counts = 300.5
  Rate = 0.1 +/- 0.01

[Sat Jun 22 00:29:54 2013] Updating counts from extracted products
[Sat Jun 22 00:29:54 2013] Set source signif. to 243.53/17.33 = 14.05
[Sat Jun 22 00:29:55 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 00:29:55 2013] Using photon index=1.80, rate=0.105, arf fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src26.arf
[Sat Jun 22 00:29:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 00:29:55 2013] Updating source flux to 1.1e-12
[Sat Jun 22 00:30:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 00:30:14 2013] xmm0067750801/analysis//spectral/fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete