[Fri Jun 21 12:23:18 2013] Detection parameters:
  Position = (277.6, 267.0) = 19 11 17.47 0 34 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 517.2 +/- 37.1
  Background counts = 126.9
  Rate = 0.1 +/- 0.01

[Fri Jun 21 12:23:18 2013] Off-axis axis estimate = 2.73'
[Fri Jun 21 12:26:46 2013] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 12:26:46 2013] Initial guess for spatial extent in simple fitting = 7.79"
[Fri Jun 21 12:26:46 2013] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.714
[Fri Jun 21 12:26:46 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 7.79"
[Fri Jun 21 13:52:40 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_src24.ximg exists
[Fri Jun 21 13:52:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_src24.csv
[Fri Jun 21 13:52:40 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri Jun 21 13:52:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_src24.csv
[Fri Jun 21 13:52:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 13:52:41 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri Jun 21 13:52:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri Jun 21 13:52:41 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri Jun 21 13:52:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri Jun 21 13:52:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 16:55:31 2013] Warning, spatial fit 24 centroid is now closest to src. 22
[Fri Jun 21 16:55:31 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 16:55:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 16:55:31 2013] Assessing source extent using major
[Fri Jun 21 16:55:31 2013] Source does appear to be extended
[Fri Jun 21 16:55:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 16:55:55 2013] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 16:55:55 2013] Initial guess for spatial extent in simple fitting = 7.79"
[Fri Jun 21 16:55:55 2013] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.714
[Fri Jun 21 16:55:55 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 7.79"
[Fri Jun 21 18:44:57 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_src24.ximg exists
[Fri Jun 21 18:44:57 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri Jun 21 18:44:57 2013] Fit fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_src24 appears to have run properly
[Fri Jun 21 18:44:57 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri Jun 21 18:44:57 2013] fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Jun 21 18:44:57 2013] Fit fullrun_pn_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Fri Jun 21 21:20:38 2013] Spatial fit model total counts = 2721.140000, observed total counts = 1593.000000
[Fri Jun 21 21:20:38 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 21:20:38 2013] Warning, spatial fit 24 centroid is now closest to src. 25
[Fri Jun 21 21:20:38 2013] Source 24 is offset by -5.078057 and -6.992157 pixels which is larger than
2 X fitted extent = 7.043311 x 1.625766, not incorporating fit results
[Fri Jun 21 21:20:38 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 21:20:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 21:20:38 2013] Assessing source extent using major
[Fri Jun 21 21:20:38 2013] Source does appear to be extended
[Fri Jun 21 21:20:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 21:20:51 2013] XMMSAS src. selection expression = ellipse(24102.897003, 23184.368378, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 21:20:51 2013] Writing source region out to fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src24_src.reg
[Fri Jun 21 21:20:51 2013] Extracting stamp from image fullrun_pn_xmm0067750801_pi300-10000_cl_sm2.00.img.gz, (240, 230) - (315, 305)
[Fri Jun 21 21:20:51 2013] XMMSAS bgd. selection expression = annulus(24102.897003, 23184.368378, 1087.500000, 2175.000000, X, Y) && !ellipse(24533.906200, 24373.395800, 2132.985661, 2096.836860, 104.448257, X, Y) && !ellipse(22817.897339, 23452.077637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23422.192627, 23165.432709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25932.206879, 22932.684875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25031.801483, 23096.253265, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 21:20:51 2013] Writing fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src24.gif
[Fri Jun 21 21:49:17 2013] Mean detx,y = (220.83, -1435.13) 
[Fri Jun 21 21:49:19 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 21:49:36 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 21:49:37 2013] Setting source spectrum file to fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Jun 21 21:49:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri Jun 21 22:39:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 22:39:31 2013] rmf not generated due to insufficient counts
[Sat Jun 22 00:29:54 2013] Updating aperture counts using extracted products
[Sat Jun 22 00:29:54 2013] Total counts from fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 1537.00
[Sat Jun 22 00:29:54 2013] Total counts from fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src24_bgd.pi.gz = 1391.00
[Sat Jun 22 00:29:54 2013] Got source and background scale factors 895683.000000, 3555370.000000
[Sat Jun 22 00:29:54 2013] User source parameters:
  Position = (277.6, 267.0) = 19 11 17.47 0 34 11.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1186.6 +/- 40.2
  Background aperture counts = 350.4
  Rate = 0.5 +/- 0.02

[Sat Jun 22 00:29:54 2013] Updating counts from extracted products
[Sat Jun 22 00:29:54 2013] Set source signif. to 1186.57/18.72 = 63.39
[Sat Jun 22 00:29:55 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 00:29:55 2013] Using photon index=1.80, rate=0.513, arf fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src24.arf
[Sat Jun 22 00:29:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 00:29:55 2013] Updating source flux to 2.3e-12
[Sat Jun 22 00:30:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 00:30:14 2013] xmm0067750801/analysis//spectral/fullrun_pn_xmm0067750801_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete