[Fri Jun 21 12:24:00 2013] Detection parameters:
  Position = (275.5, 298.1) = 19 11 18.08 0 36 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 604.3 +/- 34.8
  Background counts = 120.7
  Rate = 0.07 +/- 0.004

[Fri Jun 21 12:24:01 2013] Off-axis axis estimate = 1.66'
[Fri Jun 21 14:23:51 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 14:23:51 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Fri Jun 21 14:23:51 2013] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.744
[Fri Jun 21 14:23:51 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.26"
[Fri Jun 21 16:55:21 2013] fullrun_mos2_xmm0067750801_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 21 16:55:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067750801_pi300-10000_cl_pass0_src6.csv
[Fri Jun 21 16:55:21 2013] fullrun_mos2_xmm0067750801_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 21 16:55:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067750801_pi300-10000_cl_pass0_src6.csv
[Fri Jun 21 16:55:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067750801_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067750801_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 16:55:21 2013] fullrun_mos2_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 21 16:55:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jun 21 16:55:21 2013] fullrun_mos2_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 21 16:55:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jun 21 16:55:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067750801_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 16:55:41 2013] Source 7 is offset by -6.176038 and 5.756818 pixels which is larger than
2 X fitted extent = 6.676000 x 2.172032, not incorporating fit results
[Fri Jun 21 16:55:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 16:55:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 16:55:41 2013] Assessing source extent using major
[Fri Jun 21 16:55:41 2013] Source does appear to be extended
[Fri Jun 21 16:55:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 16:55:41 2013] Source is confused with source 5
[Fri Jun 21 16:55:41 2013] Source is confused with source 10
[Fri Jun 21 19:17:46 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 19:17:46 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Fri Jun 21 19:17:46 2013] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.744
[Fri Jun 21 19:17:46 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 7.26"
[Fri Jun 21 21:20:31 2013] fullrun_mos2_xmm0067750801_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun 21 21:20:31 2013] fullrun_mos2_xmm0067750801_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun 21 21:20:31 2013] Fit fullrun_mos2_xmm0067750801_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri Jun 21 21:20:32 2013] fullrun_mos2_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun 21 21:20:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun 21 21:20:32 2013] fullrun_mos2_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun 21 21:20:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun 21 21:20:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0067750801_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 21:20:43 2013] Source 7 is offset by -6.176038 and 5.756818 pixels which is larger than
2 X fitted extent = 6.676000 x 2.528331, not incorporating fit results
[Fri Jun 21 21:20:43 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 21:20:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 21:20:43 2013] Assessing source extent using major
[Fri Jun 21 21:20:43 2013] Source does appear to be extended
[Fri Jun 21 21:20:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 23:03:40 2013] XMMSAS src. selection expression = ellipse(23919.994690, 25884.533173, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 23:03:40 2013] Writing source region out to fullrun_mos2_xmm0067750801_pi300-10000_pass1_cl_src7_src.reg
[Fri Jun 21 23:03:40 2013] Extracting stamp from image fullrun_mos2_xmm0067750801_pi300-10000_cl_sm2.00.img.gz, (238, 261) - (313, 336)
[Fri Jun 21 23:03:40 2013] XMMSAS bgd. selection expression = annulus(23919.994690, 25884.533173, 1087.500000, 2175.000000, X, Y) && !ellipse(24550.504600, 24380.114020, 3477.696100, 3193.848092, 4.119780, X, Y) && !ellipse(23652.112854, 24761.936340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.713501, 25278.692657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23634.817993, 24395.890106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23466.106812, 23879.463013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23701.342000, 22757.272000, 1280.024037, 1280.024037, 0.000000, X, Y) && !ellipse(26279.237793, 23679.969421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26070.329468, 22914.035950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23713.966800, 26234.730000, 1660.632048, 354.556810, 66.817300, X, Y) && !ellipse(26174.584000, 24400.429000, 1304.944038, 211.968806, 354.471000, X, Y) && !ellipse(22598.726000, 26309.200000, 1266.656036, 469.574414, 45.813500, X, Y) && !ellipse(23396.618000, 26971.486000, 1726.432050, 554.156016, 60.069000, X, Y)
[Fri Jun 21 23:03:40 2013] Writing fullrun_mos2_xmm0067750801_pi300-10000_pass1_cl_src7.gif
[Fri Jun 21 23:29:18 2013] Mean detx,y = (-751.00, -1110.68) 
[Fri Jun 21 23:29:19 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 23:29:28 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 23:29:28 2013] Setting source spectrum file to fullrun_mos2_xmm0067750801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jun 21 23:29:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0067750801_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jun 21 23:48:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 23:48:18 2013] rmf not generated due to insufficient counts
[Sat Jun 22 00:29:56 2013] Updating aperture counts using extracted products
[Sat Jun 22 00:29:56 2013] Total counts from fullrun_mos2_xmm0067750801_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 2718.00
[Sat Jun 22 00:29:56 2013] Total counts from fullrun_mos2_xmm0067750801_pi300-10000_pass1_cl_src7_bgd.pi.gz = 519.00
[Sat Jun 22 00:29:56 2013] Got source and background scale factors 1149472.000000, 927156.000000
[Sat Jun 22 00:29:56 2013] User source parameters:
  Position = (275.5, 298.1) = 19 11 18.08 0 36 18.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2074.6 +/- 53.1
  Background aperture counts = 643.4
  Rate = 0.3 +/- 0.007

[Sat Jun 22 00:29:56 2013] Updating counts from extracted products
[Sat Jun 22 00:29:56 2013] Set source signif. to 2074.55/25.37 = 81.78
[Sat Jun 22 00:29:58 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 00:29:58 2013] Using photon index=1.80, rate=0.274, arf fullrun_mos2_xmm0067750801_pi300-10000_pass1_cl_src7.arf
[Sat Jun 22 00:29:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 00:29:58 2013] Updating source flux to 3.8e-12
[Sat Jun 22 00:30:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 00:30:06 2013] xmm0067750801/analysis//spectral/fullrun_mos2_xmm0067750801_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete