[Mon Jul  2 13:07:55 2012] Detection parameters:
  Position = (259.6, 292.1) = 14 58 37.02 -31 42 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.7 +/- 24.5
  Background counts = 181.9
  Rate = 0.006 +/- 0.0008

[Mon Jul  2 13:07:55 2012] Off-axis axis estimate = 2.86'
[Mon Jul  2 13:10:49 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 13:10:49 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Mon Jul  2 13:10:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.940
[Mon Jul  2 13:10:49 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.86"
[Mon Jul  2 13:31:56 2012] fullrun_pn_xmm0067750101_pi300-10000_cl_pass0_src16.ximg exists
[Mon Jul  2 13:31:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067750101_pi300-10000_cl_pass0_src16.csv
[Mon Jul  2 13:31:56 2012] fullrun_pn_xmm0067750101_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon Jul  2 13:31:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067750101_pi300-10000_cl_pass0_src16.csv
[Mon Jul  2 13:31:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067750101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067750101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 13:31:56 2012] fullrun_pn_xmm0067750101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon Jul  2 13:31:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067750101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Mon Jul  2 13:31:56 2012] fullrun_pn_xmm0067750101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Jul  2 13:31:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0067750101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Mon Jul  2 13:31:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0067750101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0067750101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 13:58:39 2012] Warning, spatial fit 16 centroid is now closest to src. 17
[Mon Jul  2 13:58:39 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 13:58:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 13:58:39 2012] Assessing source extent using major
[Mon Jul  2 13:58:39 2012] Source does appear to be extended
[Mon Jul  2 13:58:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 13:58:49 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 13:58:49 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Mon Jul  2 13:58:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.940
[Mon Jul  2 13:58:49 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 7.86"
[Mon Jul  2 14:18:07 2012] fullrun_pn_xmm0067750101_pi300-10000_cl_pass1_src16.ximg exists
[Mon Jul  2 14:18:07 2012] fullrun_pn_xmm0067750101_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon Jul  2 14:18:07 2012] Fit fullrun_pn_xmm0067750101_pi300-10000_cl_pass1_src16 appears to have run properly
[Mon Jul  2 14:18:07 2012] fullrun_pn_xmm0067750101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon Jul  2 14:18:07 2012] fullrun_pn_xmm0067750101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Jul  2 14:18:07 2012] Fit fullrun_pn_xmm0067750101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Mon Jul  2 14:46:27 2012] Source 18 is offset by 2.999741 and -8.351028 pixels which is larger than
2 X fitted extent = 0.945366 x 0.945366, not incorporating fit results
[Mon Jul  2 14:46:27 2012] Spatial fit model total counts = 514.053000, observed total counts = 475.000000
[Mon Jul  2 14:46:27 2012] Offset between fit and detection position for source 18 = 0.116727 pixels
[Mon Jul  2 14:46:27 2012] 518.667100 total counts/ 429.546000 bgd. counts: snr = 4.300072
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.116727 pixels
  Position = (259.7, 292.1) = 14 58 36.98 -31 42 12.5
  Extent = 4.6 (3.6-5.8)", rotation angle = 0
  Source counts = 89.1 +/- 22.8
  Background counts = 429.5
  Rate = 0.004 +/- 0.001
[Mon Jul  2 14:46:27 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 14:46:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 14:46:27 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 14:46:27 2012] Source does appear to be extended
[Mon Jul  2 14:46:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 14:46:36 2012] XMMSAS src. selection expression = ellipse(22543.187600, 25365.878600, 273.279608, 273.279608, 0.000000, X, Y)
[Mon Jul  2 14:46:36 2012] Writing source region out to fullrun_pn_xmm0067750101_pi300-10000_pass1_cl_src18_src.reg
[Mon Jul  2 14:46:36 2012] Extracting stamp from image fullrun_pn_xmm0067750101_pi300-10000_cl_sm2.00.img.gz, (244, 276) - (275, 308)
[Mon Jul  2 14:46:36 2012] XMMSAS bgd. selection expression = annulus(22543.187600, 25365.878600, 455.466013, 910.932026, X, Y) && !ellipse(23388.123291, 25459.154999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21672.931885, 26678.801117, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  2 14:46:36 2012] Writing fullrun_pn_xmm0067750101_pi300-10000_pass1_cl_src18.gif
[Mon Jul  2 14:55:18 2012] Mean detx,y = (-4410.97, 819.54) 
[Mon Jul  2 14:55:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  2 14:55:27 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  2 14:55:27 2012] Setting source spectrum file to fullrun_pn_xmm0067750101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Jul  2 14:55:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0067750101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Jul  2 15:20:26 2012] Not generating rmf since there are only 89 counts
[Mon Jul  2 15:20:26 2012] rmf not generated due to insufficient counts
[Mon Jul  2 15:40:23 2012] Updating aperture counts using extracted products
[Mon Jul  2 15:40:23 2012] Error reading totcts from fullrun_pn_xmm0067750101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Jul  2 15:40:23 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 15:40:23 2012] Using photon index=1.80, rate=0.00427, arf fullrun_pn_xmm0067750101_pi300-10000_pass1_cl_src18.arf
[Mon Jul  2 15:40:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 15:40:23 2012] Updating source flux to 1.7e-14
[Mon Jul  2 15:40:46 2012] Flag b found in src. 18 procflags, skipping spectral fitting
[Mon Jul  2 15:40:46 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting